Shipyard Employment Standards; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 63327-63328 [2011-26308]

Agencies

• DEPARTMENT OF LABOR
• Occupational Safety and Health Administration

[Federal Register Volume 76, Number 197 (Wednesday, October 12, 2011)]
[Notices]
[Pages 63327-63328]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-26308]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0190]


Shipyard Employment Standards; Extension of the Office of 
Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend OMB approval of the information collection requirements 
contained in the Shipyard Employment Standards (29 CFR 1915.112(a)(1), 
29 CFR 1915.112(b)(1)(i), 29 CFR 1915.112(c)(1)(i), 29 CFR 
1915.113(b)(1) and 29 CFR 1915.172(d)). The purpose of the collection 
of information (paperwork) provisions of the Standards is to reduce 
workers' risks of death or serious injury by ensuring that equipment 
has been tested and is in safe operating condition.

DATES: Comments must be submitted (postmarked, sent, or received) by 
December 12, 2011.

ADDRESSES: Electronically: You may submit comments and attachments 
electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0190, U.S. 
Department of Labor, Occupational Safety and Health Administration, 
Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Department of Labor's and Docket Office's normal 
business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number (OSHA-2011-0190) for the Information Collection Request 
(ICR). All comments, including any personal information you provide, 
are placed in the public docket without change and may be made 
available online at https://www.regulations.gov. For further information 
on submitting comments, see the ``Public Participation'' heading in the 
section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 
693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (44 U.S.C. 3506(c)(2)(A)).
    This program ensures that information is in the desired format, 
reporting burden (time and costs) is minimal, collection instruments 
are clearly understood, and OSHA's estimate of the information 
collection burden is accurate. The Occupational Safety and Health Act 
of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information 
collection by employers as necessary or appropriate for enforcement of 
the OSH Act or for developing information regarding the causes and 
prevention of occupational injuries, illnesses, and accidents (29 
U.S.C. 657). The OSH Act also requires that OSHA obtain such 
information with minimum burden upon employers, especially those 
operating small businesses, and to reduce to the maximum extent 
feasible unnecessary duplication of efforts in obtaining information 
(29 U.S.C. 657).
    Manila rope and manila-rope slings (paragraph 1915.112(a)(1)(i))--
The employer must ensure that manila rope and manila-rope slings have 
permanently affixed and legible identification markings as prescribed 
by the manufacturer that indicate the recommended safe working load for 
the

[[Page 63328]]

type(s) of hitch(es) used, the angle upon which it is based, and the 
number of legs if more than one.
    Wire rope and wire-rope slings (paragraph 1915.112(b)(1)(i))--The 
employer must ensure that wire rope and wire-rope slings have 
permanently affixed and legible identification markings as prescribed 
by the manufacturer that indicate the recommended safe working load for 
the type(s) of hitch(es) used, the angle upon which it is based, and 
the number of legs if more than one.
    Chain and chain slings (paragraph 1915.112(c)(1)(i))--The employer 
must ensure that chain and chain slings have permanently affixed and 
legible identification markings as prescribed by the manufacturer that 
indicate the recommended safe working load for the type(s) of hitch(es) 
used, the angle upon which it is based, and the number of legs if more 
than one.
    Shackles (paragraph 1915.113(a)(1))--The employer must ensure that 
shackles have permanently affixed and legible identification markings 
as prescribed by the manufacturer that indicate the recommended safe 
working load.
    Test Records for Hooks (paragraph 1915.113(b)(1))--This paragraph 
requires that the manufacturer's recommendations be followed in 
determining the safe working loads of the various sizes and types of 
hooks. If the manufacturer's recommendations are not available, the 
hook must be tested to twice the intended safe working load before it 
is initially put into use. The employer must maintain and keep readily 
available a certification record which includes the date of such test, 
the signature of the person who performed the test, and the identifier 
for the hook which was tested.
    The records are used to assure that equipment has been properly 
tested. The records also provide the most efficient means for the 
compliance officers to determine that an employer is complying with the 
Standard.
    Examination and Test Records for Unfired Pressure Vessels 
(paragraph 1915.172(d))--This paragraph requires that portable, unfired 
pressure vessels not built to the requirements of the American Society 
of Mechanical Engineers Boiler and Pressure Vessel Code, Section VIII, 
Rules for Construction of Unfired Pressure Vessels, 1963 be examined 
quarterly by a competent person and subjected to a yearly hydrostatic 
pressure test. A certification record of such examinations and tests 
shall be maintained.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is proposing to increase the existing burden hour estimate for 
the collection of information requirements specified by the Standards 
from 3,137 hours to 3,163 hours, a total increase of 26 hours. As a 
result of the Standards Improvement Project Phase III (SIP-III) Final 
Rule, the Agency identified new requirements for employers to have 
permanently affixed labels attached to slings and shackles as 
prescribed by the manufacturer's recommendations. The Agency will 
summarize any comments submitted in response to this notice and will 
include this summary in its request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Shipyard Employment Standards (29 CFR part 1915).
    OMB Number: 1218-0220.
    Affected Public: Business or other for-profits; Not-for-profit 
organizations; Federal Government; State, Local, or Tribal Government.
    Number of Respondents: 635.
    Frequency of Response: On occasion.
    Average Time per Response: Varies from 2 minutes (.03 hour) to 
maintain a certification record to 35 minutes (.58 hour) to obtain 
certain information from a manufacturer.
    Estimated Total Burden Hours: 3,163.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2011-0190). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number, so the Agency can attach 
them to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information, such as social security numbers and 
dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
Web site. All submissions, including copyrighted material, are 
available for inspection and copying at the OSHA Docket Office. 
Information on using the https://www.regulations.gov Web site to submit 
comments and access the docket is available at the Web site's ``User 
Tips'' link. Contact the OSHA Docket Office for information about 
materials not available through the Web site, and for assistance in 
using the Internet to locate docket submissions.

V. Authority and Signature

    David Michaels, PhD, MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 4-2010 
(75 FR 55355).

    Signed at Washington, DC, on October 5, 2011.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2011-26308 Filed 10-11-11; 8:45 am]
BILLING CODE 4510-26-P