Light-Walled Rectangular Pipe and Tube From Turkey; Notice of Final Results of Antidumping Duty Administrative Review, 57953-57955 [2011-24007]
Download as PDF
<![CDATA[
mstockstill on DSK4VPTVN1PROD with NOTICES
Federal Register / Vol. 76, No. 181 / Monday, September 19, 2011 / Notices
to be bearing an invalidly licensed or
used trademark are not excluded from
the scope).
• ZwipesTM: A notebook or notebook
organizer made with a blended
polyolefin writing surface as the cover
and pocket surfaces of the notebook,
suitable for writing using a speciallydeveloped permanent marker and erase
system (known as a ZwipesTM pen).
This system allows the marker portion
to mark the writing surface with a
permanent ink. The eraser portion of the
marker dispenses a solvent capable of
solubilizing the permanent ink allowing
the ink to be removed. The product
must bear the valid trademark ZwipesTM
(products found to be bearing an
invalidly licensed or used trademark are
not excluded from the scope).
• FiveStar®AdvanceTM: A notebook
or notebook organizer bound by a
continuous spiral, or helical, wire and
with plastic front and rear covers made
of a blended polyolefin plastic material
joined by 300 denier polyester, coated
on the backside with PVC (poly vinyl
chloride) coating, and extending the
entire length of the spiral or helical
wire. The polyolefin plastic covers are
of specific thickness; front cover is
0.019 inches (within normal
manufacturing tolerances) and rear
cover is 0.028 inches (within normal
manufacturing tolerances). Integral with
the stitching that attaches the polyester
spine covering, is captured both ends of
a 1″ wide elastic fabric band. This band
is located 23⁄8″ from the top of the front
plastic cover and provides pen or pencil
storage. Both ends of the spiral wire are
cut and then bent backwards to overlap
with the previous coil but specifically
outside the coil diameter but inside the
polyester covering. During construction,
the polyester covering is sewn to the
front and rear covers face to face
(outside to outside) so that when the
book is closed, the stitching is
concealed from the outside. Both free
ends (the ends not sewn to the cover
and back) are stitched with a turned
edge construction. The flexible
polyester material forms a covering over
the spiral wire to protect it and provide
a comfortable grip on the product. The
product must bear the valid trademarks
FiveStar® AdvanceTM (products found
to be bearing an invalidly licensed or
used trademark are not excluded from
the scope).
• FiveStar FlexTM: A notebook, a
notebook organizer, or binder with
plastic polyolefin front and rear covers
joined by 300 denier polyester spine
cover extending the entire length of the
spine and bound by a 3-ring plastic
fixture. The polyolefin plastic covers are
of a specific thickness; front cover is
VerDate Mar<15>2010
17:36 Sep 16, 2011
Jkt 223001
0.019 inches (within normal
manufacturing tolerances) and rear
cover is 0.028 inches (within normal
manufacturing tolerances). During
construction, the polyester covering is
sewn to the front cover face to face
(outside to outside) so that when the
book is closed, the stitching is
concealed from the outside. During
construction, the polyester cover is
sewn to the back cover with the outside
of the polyester spine cover to the inside
back cover. Both free ends (the ends not
sewn to the cover and back) are stitched
with a turned edge construction. Each
ring within the fixture is comprised of
a flexible strap portion that snaps into
a stationary post which forms a closed
binding ring. The ring fixture is riveted
with six metal rivets and sewn to the
back plastic cover and is specifically
positioned on the outside back cover.
The product must bear the valid
trademark FiveStar FlexTM (products
found to be bearing an invalidly
licensed or used trademark are not
excluded from the scope).
Merchandise subject to this order is
typically imported under headings
4810.22.5044, 4811.90.9050,
4820.10.2010, 4820.10.2020,
4820.10.2030, 4820.10.2040,
4820.10.2060, and 4820.10.4000 of the
Harmonized Tariff Schedule of the
United States (‘‘HTSUS’’). The HTSUS
headings are provided for convenience
and customs purposes; however, the
written description of the scope of this
order is dispositive.
Period of Review (‘‘POR’’)
The POR is September 1, 2009,
through August 31, 2010.
Final Rescission of Review
Because there is no information on
the record which indicates that the
Watanabe Group, Lian Li, and Leo/
Denmax made shipments of subject
merchandise which entered the United
States during the POR, and because we
did not receive any comments on our
Preliminary Rescission, in accordance
with 19 CFR 351.213(d)(3) and
consistent with our practice, we are
rescinding this review of the
antidumping duty order on certain lined
paper products from the PRC for the
period of September 1, 2009, through
August 31, 2010. The cash deposit rate
for the Watanabe Group, Lian Li, and
Leo/Denmax will continue to be the rate
established in the most recently
completed segment of this proceeding.
The Department will instruct U.S.
Customs and Border Protection (‘‘CBP’’)
to assess antidumping duties on all
appropriate entries. Antidumping duties
shall be assessed at rates equal to the
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
57953
cash deposit of estimated antidumping
duties required at the time of entry, or
withdrawal from warehouse, for
consumption, in accordance with 19
CFR 351.212(c)(2). The Department will
issue appropriate assessment
instructions directly to CBP 15 days
after publication of this notice.
Notification to Importers
This notice serves as a final reminder
to importers for whom this review is
being rescinded, as of the publication
date of this notice, of their
responsibility under 19 CFR
351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping duties prior to liquidation
of the relevant entries during this
review period. Failure to comply with
this requirement could result in the
Secretary’s presumption that
reimbursement of the antidumping
duties occurred and the subsequent
assessment of double antidumping
duties.
Notification Regarding APOs
This notice also serves as a reminder
to parties subject to administrative
protective orders (‘‘APO’’) of their
responsibility concerning the return or
destruction of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305, which continues
to govern business proprietary
information in this segment of the
proceeding. Timely written notification
of the return/destruction of APO
materials or conversion to judicial
protective order is hereby requested.
Failure to comply with the regulations
and terms of an APO is a violation
which is subject to sanction.
This notice is issued and published in
accordance with sections 751(a)(1) and
777(i)(1) of the Tariff Act of 1930, as
amended, and 19 CFR 351.213(d)(4).
Dated: September 12, 2011.
Christian Marsh,
Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations.
[FR Doc. 2011–24009 Filed 9–16–11; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–489–815]
Light-Walled Rectangular Pipe and
Tube From Turkey; Notice of Final
Results of Antidumping Duty
Administrative Review
Import Administration,
International Trade Administration,
Department of Commerce.
AGENCY:
E:\FR\FM\19SEN1.SGM
19SEN1
57954
Federal Register / Vol. 76, No. 181 / Monday, September 19, 2011 / Notices
On June 8, 2011, the
Department of Commerce (the
Department) published in the Federal
Register the preliminary results of the
administrative review of the
antidumping duty order on light-walled
rectangular pipe and tube from Turkey.
See Light-Walled Rectangular Pipe and
Tube From Turkey; Notice of
Preliminary Results of Antidumping
Duty Administrative Review, 76 FR
33200 (June 8, 2011) (Preliminary
Results). We gave interested parties an
opportunity to comment on the
Preliminary Results, but we received no
comments.
DATES: Effective Date: September 19,
2011
SUMMARY:
FOR FURTHER INFORMATION CONTACT:
Tyler Weinhold, or Robert James, AD/
CVD Operations, Office 7, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington, DC 20230;
telephone (202) 482–1121 or (202) 482–
0649, respectively.
SUPPLEMENTARY INFORMATION:
Background
On June 8, 2011, the Department
published the preliminary results of
administrative review of the
antidumping duty order covering lightwalled rectangular pipe and tube from
Turkey. See Preliminary Results. The
respondent subject to this review is
Noksel Celik Boru Sanayi A.S., (Noksel).
The petitioners in this proceeding are
Atlas Tube, Inc. and Searing Industries,
Inc. (collectively, Petitioners).
In the Preliminary Results, the
Department stated that interested parties
were to submit case briefs within
30 days of publication of the
Preliminary Results and rebuttal briefs
within five days after the due date for
filing case briefs. See Preliminary
Results, 76 FR at 33204. No interested
party submitted briefs. We have made
no changes for the final results.
Period of Review
The period of review (POR) is May 1,
2009, through April 30, 2010.
mstockstill on DSK4VPTVN1PROD with NOTICES
Scope of the Order
The merchandise subject to this order
is certain welded carbon quality lightwalled steel pipe and tube, of
rectangular (including square) cross
section, having a wall thickness of less
than 4 mm. The term carbon-quality
steel includes both carbon steel and
alloy steel which contains only small
amounts of alloying elements.
Specifically, the term carbon-quality
includes products in which none of the
VerDate Mar<15>2010
15:46 Sep 16, 2011
Jkt 223001
elements listed below exceeds the
quantity by weight respectively
indicated: 1.80 percent of manganese, or
2.25 percent of silicon, or 1.00 percent
of copper, or 0.50 percent of aluminum,
or 1.25 percent of chromium, or 0.30
percent of cobalt, or 0.40 percent of
lead, or 1.25 percent of nickel, or 0.30
percent of tungsten, or 0.10 percent of
molybdenum, or 0.10 percent of
niobium, or 0.15 percent vanadium, or
0.15 percent of zirconium. The
description of carbon-quality is
intended to identify carbon-quality
products within the scope. The welded
carbon-quality rectangular pipe and
tube subject to this order is currently
classified under the Harmonized Tariff
Schedule of the United States (HTSUS)
subheadings 7306.61.50.00 and
7306.61.70.60. While HTSUS
subheadings are provided for
convenience and U.S. Customs and
Border Protection (CBP) purposes, our
written description of the scope of the
order is dispositive.
Antidumping Duties). This clarification
will apply to entries of subject
merchandise during the POR produced
by Noksel for which Noksel did not
know the merchandise was destined for
the United States. In such instances, we
will instruct CBP to liquidate unreviewed entries at the 27.04 percent
all-others rate from the less than fair
value (LTFV) investigation if there is no
company-specific rate for an
intermediary involved in the
transaction. See Notice of Antidumping
Duty Order: Light-Walled Rectangular
Pipe and Tube From Turkey, 73 FR
31065 (May 30, 2008). See Assessment
of Antidumping Duties for a full
discussion of this clarification.
Cash Deposit Requirements
Furthermore, the following deposit
requirements will be effective upon
completion of the final results of this
administrative review for all shipments
of light-walled rectangular pipe and
tube from Turkey entered, or withdrawn
from warehouse, for consumption on or
Final Results of Review
after the publication date of the final
results of this administrative review, as
The Department has determined that
provided by section 751(a)(2)(c) of the
the following margins exist for the
Tariff Act of 1930, as amended (the Act):
period May 1, 2009, through April 30,
(1) The cash deposit rate for Noksel will
2010:
be the rate established in the final
results of review; (2) if the exporter is
Weighted
Average
not a firm covered in this review or the
Manufacturer
Margin
LTFV investigation, but the
(percentage)
manufacturer is, the cash deposit rate
will be the rate established for the most
Noksel Celik Boru Sanayi
A.S ....................................
0.00 recent period for the manufacturer of
the merchandise; and (3) if neither the
exporter nor the manufacturer is a firm
Assessment Rates
covered in this or any previous review
Pursuant to these final results, the
conducted by the Department, the cash
Department has determined, and CBP
deposit rate will be the all-others rate
shall assess, antidumping duties on all
27.04 percent ad valorem from the
appropriate entries. The Department
LTFV investigation. Id. These deposit
intends to issue assessment instructions requirements, when imposed, shall
to CBP 15 days after the date of
remain in effect until further notice.
publication of these final results.
Notification to Importers
Pursuant to 19 CFR 351.212(b)(1), we
calculated importer-specific (or
This notice also serves as a final
customer-specific) ad valorem duty
reminder to importers of their
assessment rates based on the ratio of
responsibility under 19 CFR 351.402(f)
the total amount of the dumping
to file a certificate regarding the
margins calculated for the examined
reimbursement of antidumping duties
sales to the total entered value of those
prior to liquidation of the relevant
same sales. We will instruct CBP to
entries during this POR. Failure to
assess antidumping duties on all
comply with this requirement could
appropriate entries covered by this
result in the Secretary’s presumption
review if any importer-specific (or
that reimbursement of antidumping
customer-specific) assessment rate
duties occurred and the subsequent
calculated in the final results of this
assessment of doubled antidumping
review is above de minimis.
duties.
The Department clarified its
Administrative Protective Orders
‘‘automatic assessment’’ regulation on
May 6, 2003. See Antidumping and
This notice also serves as a reminder
Countervailing Duty Proceedings:
to parties subject to administrative
Assessment of Antidumping Duties, 68
protective orders (APO) of their
FR 23954 (May 6, 2003) (Assessment of
responsibility concerning the return or
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
E:\FR\FM\19SEN1.SGM
19SEN1
Federal Register / Vol. 76, No. 181 / Monday, September 19, 2011 / Notices
destruction of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3), which
continues to govern business
proprietary information in this segment
of the proceeding. Timely written
notification of the return/destruction of
APO materials or conversion to judicial
protective order is hereby requested.
Failure to comply with the regulations
and terms of an APO is a violation
which is subject to sanction.
We are issuing and publishing this
notice in accordance with sections
751(a)(1) and 777(i) of the Act.
Dated: September 12, 2011.
Christian Marsh,
Acting Deputy Assistant Secretary for Import
Administration.
[FR Doc. 2011–24007 Filed 9–16–11; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–583–833]
Certain Polyester Staple Fiber From
Taiwan: Final Results of Antidumping
Duty Administrative Review
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: On April 21, 2011, the
Department of Commerce published the
preliminary results of the administrative
review of the antidumping duty order
on certain polyester staple fiber from
Taiwan. The period of review is May 1,
2009, through April 30, 2010. We gave
interested parties an opportunity to
comment on the preliminary results. We
received comments from Far Eastern
New Century Corporation. The final
weighted-average dumping margin for
Far Eastern New Century Corporation is
listed below in the ‘‘Final Results of the
Review’’ section of this notice.
DATES: Effective Date: September 19,
2011.
FOR FURTHER INFORMATION CONTACT:
Michael A. Romani, AD/CVD
Operations, Office 5, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington DC 20230;
telephone (202) 482–0198.
mstockstill on DSK4VPTVN1PROD with NOTICES
AGENCY:
Background
On April 21, 2011, the Department of
Commerce (the Department) published
the preliminary results of the
administrative review of the
antidumping duty order on certain
polyester staple fiber from Taiwan. See
VerDate Mar<15>2010
15:46 Sep 16, 2011
Jkt 223001
Certain Polyester Staple Fiber From
Taiwan: Preliminary Results of
Antidumping Duty Administrative
Review, 76 FR 22366 (April 21, 2011)
(Preliminary Results). We invited
interested parties to comment on the
Preliminary Results. We received
comments from the respondent.
The Department has conducted this
administrative review in accordance
with section 751(a) of the Tariff Act of
1930, as amended (the Act).
Scope of the Order
The product covered by the order is
polyester staple fiber (PSF). PSF is
defined as synthetic staple fibers, not
carded, combed or otherwise processed
for spinning, of polyesters measuring
3.3 decitex (3 denier, inclusive) or more
in diameter. This merchandise is cut to
lengths varying from one inch (25 mm)
to five inches (127 mm). The
merchandise subject to the order may be
coated, usually with a silicon or other
finish, or not coated. PSF is generally
used as stuffing in sleeping bags,
mattresses, ski jackets, comforters,
cushions, pillows, and furniture.
Merchandise of less than 3.3 decitex
(less than 3 denier) currently classifiable
in the Harmonized Tariff Schedule of
the United States (HTSUS) at
subheading 5503.20.00.20 is specifically
excluded from the order. Also
specifically excluded from the order are
polyester staple fibers of 10 to 18 denier
that are cut to lengths of 6 to 8 inches
(fibers used in the manufacture of
carpeting). In addition, low-melt PSF is
excluded from the order. Low-melt PSF
is defined as a bi-component fiber with
an outer sheath that melts at a
significantly lower temperature than its
inner core.
The merchandise subject to the order
is currently classifiable in the HTSUS at
subheadings 5503.20.00.45 and
5503.20.00.65. Although the HTSUS
subheadings are provided for
convenience and customs purposes, the
written description of the merchandise
subject to the order is dispositive.
Analysis of Comments Received
All issues raised in the case briefs by
parties to this review are addressed in
the ‘‘Issues and Decision Memorandum’’
from Christian Marsh, Deputy Assistant
Secretary for Antidumping and
Countervailing Duty Operations, to
Ronald K. Lorentzen, Deputy Assistant
Secretary for Import Administration,
dated concurrently with this notice
(Decision Memorandum), and hereby
adopted by this notice. A list of the
issues which parties have raised and to
which we have responded in the
Decision Memorandum is attached to
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
57955
this notice as an Appendix. The
Decision Memorandum, which is a
public document, is on file in the
Department’s Central Records Unit of
the main Commerce building, Room
7046, and is accessible on the Internet
at https://ia.ita.doc.gov/frn/.
The paper copy and electronic version
of the Decision Memorandum are
identical in content.
Results of Cost Test
For these final results, we continue to
find that, for certain products, more
than 20 percent of the respondent’s
sales in the home market were at prices
below the cost of production and the
below-cost sales were made within an
extended period of time in substantial
quantities. In addition, these sales were
made at prices that did not permit the
recovery of costs within a reasonable
period of time. Therefore, we
disregarded these sales and used the
remaining sales of the same product as
the basis for determining normal value
in accordance with section 773(b)(1) of
the Act.
Final Results of the Review
We made one change to our
calculations announced in the
Preliminary Results. In calculating the
cost of production in the Preliminary
Results, we inadvertently used the ratio
for general and administrative expenses
reported by Far Eastern New Century
Corporation in its initial response to our
questionnaire rather than a correction to
this ratio which the respondent
provided in a subsequent submission. In
these final results we employed the
subsequently reported ratio. This
change had no effect on the weightedaverage dumping margin determined for
Far Eastern New Century Corporation.
As a result of our review, we determine
that a weighted-average dumping
margin of 2.92 percent exists for Far
Eastern New Century Corporation for
the period May 1, 2009, through April
30, 2010.
Assessment Rates
The Department shall determine and
U.S. Customs and Border Protection
(CBP) shall assess antidumping duties
on all appropriate entries. Although Far
Eastern New Century Corporation
indicated that it was not the importer of
record for any of its sales to the United
States during the period of review, it
reported the names of the importers of
record for all of its U.S. sales. Because
Far Eastern New Century Corporation
also reported the entered value for all of
its U.S. sales, we have calculated
importer-specific assessment rates for
the merchandise in question by
E:\FR\FM\19SEN1.SGM
19SEN1
]]>Agencies
[Federal Register Volume 76, Number 181 (Monday, September 19, 2011)]
[Notices]
[Pages 57953-57955]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-24007]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-489-815]
Light-Walled Rectangular Pipe and Tube From Turkey; Notice of
Final Results of Antidumping Duty Administrative Review
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
[[Page 57954]]
SUMMARY: On June 8, 2011, the Department of Commerce (the Department)
published in the Federal Register the preliminary results of the
administrative review of the antidumping duty order on light-walled
rectangular pipe and tube from Turkey. See Light-Walled Rectangular
Pipe and Tube From Turkey; Notice of Preliminary Results of Antidumping
Duty Administrative Review, 76 FR 33200 (June 8, 2011) (Preliminary
Results). We gave interested parties an opportunity to comment on the
Preliminary Results, but we received no comments.
DATES: Effective Date: September 19, 2011
FOR FURTHER INFORMATION CONTACT: Tyler Weinhold, or Robert James, AD/
CVD Operations, Office 7, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC 20230; telephone (202) 482-
1121 or (202) 482-0649, respectively.
SUPPLEMENTARY INFORMATION:
Background
On June 8, 2011, the Department published the preliminary results
of administrative review of the antidumping duty order covering light-
walled rectangular pipe and tube from Turkey. See Preliminary Results.
The respondent subject to this review is Noksel Celik Boru Sanayi A.S.,
(Noksel). The petitioners in this proceeding are Atlas Tube, Inc. and
Searing Industries, Inc. (collectively, Petitioners).
In the Preliminary Results, the Department stated that interested
parties were to submit case briefs within 30 days of publication of the
Preliminary Results and rebuttal briefs within five days after the due
date for filing case briefs. See Preliminary Results, 76 FR at 33204.
No interested party submitted briefs. We have made no changes for the
final results.
Period of Review
The period of review (POR) is May 1, 2009, through April 30, 2010.
Scope of the Order
The merchandise subject to this order is certain welded carbon
quality light-walled steel pipe and tube, of rectangular (including
square) cross section, having a wall thickness of less than 4 mm. The
term carbon-quality steel includes both carbon steel and alloy steel
which contains only small amounts of alloying elements. Specifically,
the term carbon-quality includes products in which none of the elements
listed below exceeds the quantity by weight respectively indicated:
1.80 percent of manganese, or 2.25 percent of silicon, or 1.00 percent
of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or
0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of
nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or
0.10 percent of niobium, or 0.15 percent vanadium, or 0.15 percent of
zirconium. The description of carbon-quality is intended to identify
carbon-quality products within the scope. The welded carbon-quality
rectangular pipe and tube subject to this order is currently classified
under the Harmonized Tariff Schedule of the United States (HTSUS)
subheadings 7306.61.50.00 and 7306.61.70.60. While HTSUS subheadings
are provided for convenience and U.S. Customs and Border Protection
(CBP) purposes, our written description of the scope of the order is
dispositive.
Final Results of Review
The Department has determined that the following margins exist for
the period May 1, 2009, through April 30, 2010:
------------------------------------------------------------------------
Weighted
Average
Manufacturer Margin
(percentage)
------------------------------------------------------------------------
Noksel Celik Boru Sanayi A.S............................ 0.00
------------------------------------------------------------------------
Assessment Rates
Pursuant to these final results, the Department has determined, and
CBP shall assess, antidumping duties on all appropriate entries. The
Department intends to issue assessment instructions to CBP 15 days
after the date of publication of these final results. Pursuant to 19
CFR 351.212(b)(1), we calculated importer-specific (or customer-
specific) ad valorem duty assessment rates based on the ratio of the
total amount of the dumping margins calculated for the examined sales
to the total entered value of those same sales. We will instruct CBP to
assess antidumping duties on all appropriate entries covered by this
review if any importer-specific (or customer-specific) assessment rate
calculated in the final results of this review is above de minimis.
The Department clarified its ``automatic assessment'' regulation on
May 6, 2003. See Antidumping and Countervailing Duty Proceedings:
Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment
of Antidumping Duties). This clarification will apply to entries of
subject merchandise during the POR produced by Noksel for which Noksel
did not know the merchandise was destined for the United States. In
such instances, we will instruct CBP to liquidate un-reviewed entries
at the 27.04 percent all-others rate from the less than fair value
(LTFV) investigation if there is no company-specific rate for an
intermediary involved in the transaction. See Notice of Antidumping
Duty Order: Light-Walled Rectangular Pipe and Tube From Turkey, 73 FR
31065 (May 30, 2008). See Assessment of Antidumping Duties for a full
discussion of this clarification.
Cash Deposit Requirements
Furthermore, the following deposit requirements will be effective
upon completion of the final results of this administrative review for
all shipments of light-walled rectangular pipe and tube from Turkey
entered, or withdrawn from warehouse, for consumption on or after the
publication date of the final results of this administrative review, as
provided by section 751(a)(2)(c) of the Tariff Act of 1930, as amended
(the Act): (1) The cash deposit rate for Noksel will be the rate
established in the final results of review; (2) if the exporter is not
a firm covered in this review or the LTFV investigation, but the
manufacturer is, the cash deposit rate will be the rate established for
the most recent period for the manufacturer of the merchandise; and (3)
if neither the exporter nor the manufacturer is a firm covered in this
or any previous review conducted by the Department, the cash deposit
rate will be the all-others rate 27.04 percent ad valorem from the LTFV
investigation. Id. These deposit requirements, when imposed, shall
remain in effect until further notice.
Notification to Importers
This notice also serves as a final reminder to importers of their
responsibility under 19 CFR 351.402(f) to file a certificate regarding
the reimbursement of antidumping duties prior to liquidation of the
relevant entries during this POR. Failure to comply with this
requirement could result in the Secretary's presumption that
reimbursement of antidumping duties occurred and the subsequent
assessment of doubled antidumping duties.
Administrative Protective Orders
This notice also serves as a reminder to parties subject to
administrative protective orders (APO) of their responsibility
concerning the return or
[[Page 57955]]
destruction of proprietary information disclosed under APO in
accordance with 19 CFR 351.305(a)(3), which continues to govern
business proprietary information in this segment of the proceeding.
Timely written notification of the return/destruction of APO materials
or conversion to judicial protective order is hereby requested. Failure
to comply with the regulations and terms of an APO is a violation which
is subject to sanction.
We are issuing and publishing this notice in accordance with
sections 751(a)(1) and 777(i) of the Act.
Dated: September 12, 2011.
Christian Marsh,
Acting Deputy Assistant Secretary for Import Administration.
[FR Doc. 2011-24007 Filed 9-16-11; 8:45 am]
BILLING CODE 3510-DS-P
