The Manufacturing Council: Meeting of the Manufacturing Council, 57714 [2011-23901]

Download as PDF 57714 Federal Register / Vol. 76, No. 180 / Friday, September 16, 2011 / Notices mstockstill on DSK4VPTVN1PROD with NOTICES Liaobushangdun Huada Furniture Factory, Great Rich (HK) Enterprise Co., Ltd.’’ that was listed in the Final Results to ‘‘Dongguan Liaobushangdun Huada Furniture Factory, Great Rich (HK) Enterprises Co., Ltd.’’ The antidumping duty percentage margin assigned to this entity has not changed. The above corrections are also reflected in the customs instructions. Lastly, we are amending the Final Results by removing Zhangjiagang Zheng Yan Decoration Co. Ltd. from the rate table and noting that this company should not have been listed as receiving an antidumping duty margin of 41.75 percent. The review of Zhangjiagang Zheng Yan Decoration Co. Ltd. was rescinded and thus this company’s dumping margin remains unchanged. We will liquidate entries for ZYD during the instant POR at the cash deposit rate required at the time of entry. In addition, ZYD’s cash deposit rate will not change as a result of this review but will remain the rate in effect at the time of entry. Correction of these ministerial errors does not affect the margin selected for the PRC-wide entity. However, we disagree that the Department made ministerial errors with respect to: (1) Accounting for Dalian Huafeng’s name change in the customs instructions; and (2) calculating the surrogate value for plywood. Further, the Department does not consider Petitioners’ comments regarding the omission of reseller language from the liquidation instructions for Dalian Huafeng to be a ministerial error allegation and is, therefore, not making any changes in response to Petitioners’ comments. For a full explanation of each of these findings, see Memorandum to Abdelali Elouaradia, Director, AD/CVD Operations, Office 4 regarding, ‘‘Ministerial Error Allegations in the Final Results of the 2009 Antidumping Duty Administrative Review of Wooden Bedroom Furniture from the People’s Republic of China,’’ dated concurrently with this notice. Assessment Pursuant to section 751(a)(2)(A) of the Act and 19 CFR 351.212(b), the Department shall determine, and U.S. Customs and Border Protection (‘‘CBP’’) shall assess, antidumping duties on all appropriate entries. The Department intends to issue assessment instructions to CBP that are related to the amended final results 15 days after the date of publication of the amended final results of review. Cash Deposit Requirements Cash deposit requirements related to the amended final results will be VerDate Mar<15>2010 16:26 Sep 15, 2011 Jkt 223001 effective retroactively for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the Final Results, as provided for by section 751(a)(2)(C) of the Act. The cash deposit rate for companies whose rate was corrected by the amended final results (i.e., ZYD) will be the corrected rate for that company noted above. As noted above, ZYD’s cash deposit rate will not change as a result of this review but will remain the rate in effect at the time of entry. For previously investigated or reviewed PRC and nonPRC exporters that have separate rates whose rate has not changed as a result of the amended final results, the cash deposit rate will continue to be the exporter-specific rate published for the most recent period. For all PRC exporters of subject merchandise which have not been found to be entitled to a separate rate, the cash deposit rate will be the PRC-wide rate of 216.01 percent. For all non-PRC exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the PRC exporters that supplied that non-PRC exporter. These deposit requirements shall remain in effect until further notice. These amended final results are published in accordance with sections 751(h) and 777(i)(1) of the Act. Dated: September 12, 2011. Christian Marsh, Acting Deputy Assistant Secretary for Import Administration. [FR Doc. 2011–23832 Filed 9–15–11; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration The Manufacturing Council: Meeting of the Manufacturing Council International Trade Administration, U.S. Department of Commerce. ACTION: Notice of an open meeting. AGENCY: The Manufacturing Council will hold a meeting to hear updates from the Department of Commerce in addition to the Council’s ex-officio agency members from, the Departments of the Treasury, Labor, and Energy on past Council recommendations regarding competitiveness, workforce development issues, energy policy, trade agreements and other issues affecting the U.S. manufacturing sector and to determine future areas of focus for Council work. SUMMARY: PO 00000 Frm 00003 Fmt 4703 Sfmt 9990 September 29, 2011. Time: 9 a.m.–11 a.m. EDT. DATES: The U.S. Department of Commerce, 1401 Constitution Avenue, NW., Room 4830, Washington, DC 20230. All guests are requested to register in advance. This program will be physically accessible to people with disabilities. Seating is limited and will be on a first come, first served basis. Requests for sign language interpretation, other auxiliary aids, or pre-registration, should be submitted no later than September 22, 2011 to Jennifer Pilat, the Manufacturing Council, Room 4043, 1401 Constitution Avenue, NW., Washington, DC 20230, telephone 202–482–4501, OACIE@trade.gov. Last minute requests will be accepted, but may be impossible to fill. ADDRESSES: FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the Manufacturing Council, Room 4043, 1401 Constitution Avenue, NW., Washington, DC 20230, telephone: 202–482–4501, e-mail: OACIE@trade.gov. The Council was re-chartered on April 8, 2010, to advise the Secretary of Commerce on matters relating to the U.S. manufacturing industry. No time will be available for oral comments from members of the public attending the meeting. Any member of the public may submit pertinent written comments concerning the Council’s affairs at any time before or after the meeting. Comments may be submitted to Jennifer Pilat at the contact information indicated above. To be considered during the meeting, comments must be received no later than 5 p.m. Eastern Time on September 22, 2011, to ensure transmission to the Council prior to the meeting. Comments received after that date will be distributed to the members but may not be considered at the meeting. Copies of Council meeting minutes will be available within 90 days of the meeting. SUPPLEMENTARY INFORMATION: Dated: September 12, 2011. Jennifer Pilat, Executive Secretary, The Manufacturing Council. [FR Doc. 2011–23901 Filed 9–15–11; 8:45 am] BILLING CODE 3510–DR–P E:\FR\FM\16SEN1.SGM 16SEN1

Agencies

[Federal Register Volume 76, Number 180 (Friday, September 16, 2011)]
[Notices]
[Page 57714]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-23901]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


The Manufacturing Council: Meeting of the Manufacturing Council

AGENCY: International Trade Administration, U.S. Department of 
Commerce.

ACTION: Notice of an open meeting.

-----------------------------------------------------------------------

SUMMARY: The Manufacturing Council will hold a meeting to hear updates 
from the Department of Commerce in addition to the Council's ex-officio 
agency members from, the Departments of the Treasury, Labor, and Energy 
on past Council recommendations regarding competitiveness, workforce 
development issues, energy policy, trade agreements and other issues 
affecting the U.S. manufacturing sector and to determine future areas 
of focus for Council work.

DATES: September 29, 2011.
    Time: 9 a.m.-11 a.m. EDT.

ADDRESSES: The U.S. Department of Commerce, 1401 Constitution Avenue, 
NW., Room 4830, Washington, DC 20230. All guests are requested to 
register in advance. This program will be physically accessible to 
people with disabilities. Seating is limited and will be on a first 
come, first served basis. Requests for sign language interpretation, 
other auxiliary aids, or pre-registration, should be submitted no later 
than September 22, 2011 to Jennifer Pilat, the Manufacturing Council, 
Room 4043, 1401 Constitution Avenue, NW., Washington, DC 20230, 
telephone 202-482-4501, OACIE@trade.gov. Last minute requests will be 
accepted, but may be impossible to fill.

FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the Manufacturing 
Council, Room 4043, 1401 Constitution Avenue, NW., Washington, DC 
20230, telephone: 202-482-4501, e-mail: OACIE@trade.gov.

SUPPLEMENTARY INFORMATION: The Council was re-chartered on April 8, 
2010, to advise the Secretary of Commerce on matters relating to the 
U.S. manufacturing industry.
    No time will be available for oral comments from members of the 
public attending the meeting. Any member of the public may submit 
pertinent written comments concerning the Council's affairs at any time 
before or after the meeting. Comments may be submitted to Jennifer 
Pilat at the contact information indicated above. To be considered 
during the meeting, comments must be received no later than 5 p.m. 
Eastern Time on September 22, 2011, to ensure transmission to the 
Council prior to the meeting. Comments received after that date will be 
distributed to the members but may not be considered at the meeting.
    Copies of Council meeting minutes will be available within 90 days 
of the meeting.

    Dated: September 12, 2011.
Jennifer Pilat,
Executive Secretary, The Manufacturing Council.
[FR Doc. 2011-23901 Filed 9-15-11; 8:45 am]
BILLING CODE 3510-DR-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.