Certain Welded Stainless Steel Pipe From Korea and Taiwan; Institution of a Five-Year Review Concerning the Antidumping Duty Orders on Certain Welded Stainless Steel Pipe From Korea and Taiwan, 38688-38691 [2011-16449]

Agencies

• INTERNATIONAL TRADE COMMISSION

[Federal Register Volume 76, Number 127 (Friday, July 1, 2011)]
[Notices]
[Pages 38688-38691]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-16449]


-----------------------------------------------------------------------

 INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 731-TA-540 and 541;Third Review]


Certain Welded Stainless Steel Pipe From Korea and Taiwan; 
Institution of a Five-Year Review Concerning the Antidumping Duty 
Orders on Certain Welded Stainless Steel Pipe From Korea and Taiwan

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice that it has instituted 
reviews pursuant to section 751(c) of the Tariff Act of 1930 (19 U.S.C. 
1675(c)) (the Act) to determine whether revocation of the antidumping 
duty orders on certain welded stainless steel pipe from Korea and 
Taiwan would be likely to lead to continuation or recurrence of 
material injury. Pursuant to section 751(c)(2) of the Act, interested 
parties are requested to respond to this notice by submitting the 
information specified below to the Commission; \1\ to be assured of 
consideration, the deadline for responses is August 1, 2011. Comments 
on the adequacy of responses may be filed with the Commission by 
September 13, 2011. For further information concerning the conduct of 
these reviews and rules of general application, consult the 
Commission's Rules of Practice and Procedure, part 201, subparts A 
through E (19 CFR part 201), and part 207, subparts A, D, E, and F (19 
CFR part 207), as most recently amended at 74 FR 2847 (January 16, 
2009).
---------------------------------------------------------------------------

    \1\ No response to this request for information is required if a 
currently valid Office of Management and Budget (OMB) number is not 
displayed; the OMB number is 3117-0016/USITC No. 11-5-250, 
expiration date June 30, 2011. Public reporting burden for the 
request is estimated to average 15 hours per response. Please send 
comments regarding the accuracy of this burden estimate to the 
Office of Investigations, U.S. International Trade Commission, 500 E 
Street, SW., Washington, DC 20436.

---------------------------------------------------------------------------
DATES: : Effective Date: July 1, 2011.

FOR FURTHER INFORMATION CONTACT: Mary Messer (202-205-3193), Office of 
Investigations, U.S. International Trade Commission, 500 E Street, SW., 
Washington, DC 20436. Hearing-impaired persons can obtain information 
on this matter by contacting the Commission's TDD terminal on 202-205-
1810. Persons with mobility impairments who will need special 
assistance in gaining access to the Commission should contact the 
Office of the Secretary at 202-205-2000. General information concerning 
the Commission may also be obtained by accessing its internet server 
(https://www.usitc.gov.)
    The public record for these reviews may be viewed on the 
Commission's electronic docket (EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: 
    Background.--On December 30, 1992, the Department of Commerce 
(``Commerce'') issued antidumping duty orders on imports of welded ASTM 
A-312 stainless steel pipe from Korea (57 FR 62301) and Taiwan (57 FR 
62300). Following first five-year reviews by Commerce and the 
Commission, effective October 16, 2000, Commerce issued a continuation 
of the antidumping duty orders on imports of certain welded stainless 
steel pipe from Korea and Taiwan (65 FR 61143). Following second five-
year reviews by Commerce and the Commission, effective August 28, 2006, 
Commerce issued a continuation of the

[[Page 38689]]

antidumping duty orders on imports of welded ASTM A-312 stainless steel 
pipe from Korea and Taiwan (71 FR 53412, September 11, 2006). The 
Commission is now conducting third reviews to determine whether 
revocation of the orders would be likely to lead to continuation or 
recurrence of material injury to the domestic industry within a 
reasonably foreseeable time. It will assess the adequacy of interested 
party responses to this notice of institution to determine whether to 
conduct full reviews or expedited reviews. The Commission's 
determinations in any expedited reviews will be based on the facts 
available, which may include information provided in response to this 
notice.
    Definitions.--The following definitions apply to these reviews:
    (1) Subject Merchandise is the class or kind of merchandise that is 
within the scope of the five-year reviews, as defined by the Department 
of Commerce.
    (2) The Subject Countries in these reviews are Korea and Taiwan.
    (3) The Domestic Like Product is the domestically produced product 
or products which are like, or in the absence of like, most similar in 
characteristics and uses with, the Subject Merchandise. In its original 
determinations and full first five-year review determinations, the 
Commission defined the Domestic Like Product as all welded stainless 
steel pipes and pressure tubes, excluding grade 409 tubes and 
mechanical tubes (also known as ornamental tubes). Thus, in addition to 
welded ASTM A-312 stainless steel pipe, the Domestic Like Product 
included such tubular products as ASTM A-778 and A-358 pipes and ASTM 
A-249, A-269, and A-270 pressure tubes. In its full second five-year 
review determinations, the Commission found that a change from the 
original definition of the Domestic Like Product was appropriate and 
defined the Domestic Like Product as only welded ASTM A-312 and A-778 
stainless steel pipes. For purposes of responding to this notice of 
institution in these third five-year reviews, please provide the 
requested information based on the Commission's most recent Domestic 
Like Product determination: welded ASTM A-312 and A-778 stainless steel 
pipes.
    (4) The Domestic Industry is the U.S. producers as a whole of the 
Domestic Like Product, or those producers whose collective output of 
the Domestic Like Product constitutes a major proportion of the total 
domestic production of the product. In its original determinations and 
its full first five-year review determinations, the Commission defined 
the Domestic Industry as producers of welded stainless steel pipes and 
pressure tubes, excluding grade 409 tubes and mechanical tubes (also 
known as ornamental tubes). In its full second five-year review 
determinations, the Commission defined the Domestic Industry as all 
U.S. producers of welded ASTM A-312 and A-778 stainless steel pipes. 
For purposes of responding to this notice of institution in these third 
five-year reviews, please provide the requested information based on 
the Commission's most recent Domestic Industry determination: all 
domestic producers of welded ASTM A-312 and A-778 stainless steel 
pipes.
    (5) An Importer is any person or firm engaged, either directly or 
through a parent company or subsidiary, in importing the Subject 
Merchandise into the United States from a foreign manufacturer or 
through its selling agent.
    Participation in the reviews and public service list.--Persons, 
including industrial users of the Subject Merchandise and, if the 
merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the reviews as parties must 
file an entry of appearance with the Secretary to the Commission, as 
provided in section 201.11(b)(4) of the Commission's rules, no later 
than 21 days after publication of this notice in the Federal Register. 
The Secretary will maintain a public service list containing the names 
and addresses of all persons, or their representatives, who are parties 
to the reviews.
    Former Commission employees who are seeking to appear in Commission 
five-year reviews are advised that they may appear in a review even if 
they participated personally and substantially in the corresponding 
underlying original investigation. The Commission's designated agency 
ethics official has advised that a five-year review is not considered 
the ``same particular matter'' as the corresponding underlying original 
investigation for purposes of 18 U.S.C. Sec.  207, the post employment 
statute for Federal employees, and Commission rule 201.15(b)(19 CFR 
Sec.  201.15(b)), 73 FR 24609 (May 5, 2008). This advice was developed 
in consultation with the Office of Government Ethics. Consequently, 
former employees are not required to seek Commission approval to appear 
in a review under Commission rule 19 CFR Sec.  201.15, even if the 
corresponding underlying original investigation was pending when they 
were Commission employees. For further ethics advice on this matter, 
contact Carol McCue Verratti, Deputy Agency Ethics Official, at 202-
205-3088.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and APO service list.--
Pursuant to section 207.7(a) of the Commission's rules, the Secretary 
will make BPI submitted in these reviews available to authorized 
applicants under the APO issued in the reviews, provided that the 
application is made no later than 21 days after publication of this 
notice in the Federal Register. Authorized applicants must represent 
interested parties, as defined in 19 U.S.C. 1677(9), who are parties to 
the reviews. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Certification.--Pursuant to section 207.3 of the Commission's 
rules, any person submitting information to the Commission in 
connection with these reviews must certify that the information is 
accurate and complete to the best of the submitter's knowledge. In 
making the certification, the submitter will be deemed to consent, 
unless otherwise specified, for the Commission, its employees, and 
contract personnel to use the information provided in any other reviews 
or investigations of the same or comparable products which the 
Commission conducts under Title VII of the Act, or in internal audits 
and investigations relating to the programs and operations of the 
Commission pursuant to 5 U.S.C. Appendix 3.
    Written submissions.--Pursuant to section 207.61 of the 
Commission's rules, each interested party response to this notice must 
provide the information specified below. The deadline for filing such 
responses is August 1, 2011. Pursuant to section 207.62(b) of the 
Commission's rules, eligible parties (as specified in Commission rule 
207.62(b)(1)) may also file comments concerning the adequacy of 
responses to the notice of institution and whether the Commission 
should conduct expedited full reviews. The deadline for filing such 
comments is September 13, 2011. All written submissions must conform 
with the provisions of sections 201.8 and 207.3 of the Commission's 
rules and any submissions that contain BPI must also conform with the 
requirements of sections 201.6 and 207.7 of the Commission's rules. The 
Commission's rules do not authorize filing of submissions with the 
Secretary by facsimile or electronic means, except to

[[Page 38690]]

the extent permitted by section 201.8 of the Commission's rules, as 
amended, 67 FR 68036 (November 8, 2002). Also, in accordance with 
sections 201.16(c) and 207.3 of the Commission's rules, each document 
filed by a party to the reviews must be served on all other parties to 
the reviews (as identified by either the public or APO service list as 
appropriate), and a certificate of service must accompany the document 
(if you are not a party to the reviews you do not need to serve your 
response).
    Inability to provide requested information.--Pursuant to section 
207.61(c) of the Commission's rules, any interested party that cannot 
furnish the information requested by this notice in the requested form 
and manner shall notify the Commission at the earliest possible time, 
provide a full explanation of why it cannot provide the requested 
information, and indicate alternative forms in which it can provide 
equivalent information. If an interested party does not provide this 
notification (or the Commission finds the explanation provided in the 
notification inadequate) and fails to provide a complete response to 
this notice, the Commission may take an adverse inference against the 
party pursuant to section 776(b) of the Act in making its 
determinations in the reviews.
    Information To Be Provided In Response to This Notice of 
Institution: If you are a domestic producer, union/worker group, or 
trade/business association; import/export Subject Merchandise from more 
than one Subject Country; or produce Subject Merchandise in more than 
one Subject Country, you may file a single response. If you do so, 
please ensure that your response to each question includes the 
information requested for each pertinent Subject Country. As used 
below, the term ``firm'' includes any related firms.
    (1) The name and address of your firm or entity (including World 
Wide Web address) and name, telephone number, fax number, and E-mail 
address of the certifying official.
    (2) A statement indicating whether your firm/entity is a U.S. 
producer of the Domestic Like Product, a U.S. union or worker group, a 
U.S. importer of the Subject Merchandise, a foreign producer or 
exporter of the Subject Merchandise, a U.S. or foreign trade or 
business association, or another interested party (including an 
explanation). If you are a union/worker group or trade/business 
association, identify the firms in which your workers are employed or 
which are members of your association.
    (3) A statement indicating whether your firm/entity is willing to 
participate in these reviews by providing information requested by the 
Commission.
    (4) A statement of the likely effects of the revocation of the 
antidumping duty orders on the Domestic Industry in general and/or your 
firm/entity specifically. In your response, please discuss the various 
factors specified in section 752(a) of the Act (19 U.S.C. Sec.  
1675a(a)) including the likely volume of subject imports, likely price 
effects of subject imports, and likely impact of imports of Subject 
Merchandise on the Domestic Industry.
    (5) A list of all known and currently operating U.S. producers of 
the Domestic Like Product. Identify any known related parties and the 
nature of the relationship as defined in section 771(4)(B) of the Act 
(19 U.S.C. Sec.  1677(4)(B)).
    (6) A list of all known and currently operating U.S. importers of 
the Subject Merchandise and producers of the Subject Merchandise in 
each Subject Country that currently export or have exported Subject 
Merchandise to the United States or other countries after 2005.
    (7) A list of 3-5 leading purchasers in the U.S. market for the 
Domestic Like Product and the Subject Merchandise (including street 
address, World Wide Web address, and the name, telephone number, fax 
number, and E-mail address of a responsible official at each firm).
    (8) A list of known sources of information on national or regional 
prices for the Domestic Like Product or the Subject Merchandise in the 
U.S. or other markets.
    (9) If you are a U.S. producer of the Domestic Like Product, 
provide the following information on your firm's operations on that 
product during calendar year 2010, except as noted (report quantity 
data in short tons and value data in U.S. dollars, f.o.b. plant). If 
you are a union/worker group or trade/business association, provide the 
information, on an aggregate basis, for the firms in which your workers 
are employed/which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total U.S. production of the Domestic Like Product 
accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm to produce the Domestic Like 
Product (i.e., the level of production that your establishment(s) could 
reasonably have expected to attain during the year, assuming normal 
operating conditions (using equipment and machinery in place and ready 
to operate), normal operating levels (hours per week/weeks per year), 
time for downtime, maintenance, repair, and cleanup, and a typical or 
representative product mix);
    (c) the quantity and value of U.S. commercial shipments of the 
Domestic Like Product produced in your U.S. plant(s);
    (d) the quantity and value of U.S. internal consumption/company 
transfers of the Domestic Like Product produced in your U.S. plant(s); 
and
    (e) the value of (i) Net sales, (ii) cost of goods sold (COGS), 
(iii) gross profit, (iv) selling, general and administrative (SG&A) 
expenses, and (v) operating income of the Domestic Like Product 
produced in your U.S. plant(s) (include both U.S. and export commercial 
sales, internal consumption, and company transfers) for your most 
recently completed fiscal year (identify the date on which your fiscal 
year ends).
    (10) If you are a U.S. importer or a trade/business association of 
U.S. importers of the Subject Merchandise from the Subject Country, 
provide the following information on your firm's(s') operations on that 
product during calendar year 2010 (report quantity data in short tons 
and value data in U.S. dollars). If you are a trade/business 
association, provide the information, on an aggregate basis, for the 
firms which are members of your association.
    (a) The quantity and value (landed, duty-paid but not including 
antidumping duties) of U.S. imports and, if known, an estimate of the 
percentage of total U.S. imports of Subject Merchandise from each 
Subject Country accounted for by your firm's(s') imports;
    (b) the quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. commercial shipments of Subject Merchandise imported 
from each Subject Country; and
    (c) the quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. internal consumption/company transfers of Subject 
Merchandise imported from each Subject Country.
    (11) If you are a producer, an exporter, or a trade/business 
association of producers or exporters of the Subject Merchandise in the 
Subject Country(ies), provide the following information on your 
firm's(s') operations on that product during calendar year 2010 (report 
quantity data in short tons and value data in U.S. dollars, landed and 
duty-paid at the U.S. port but not including antidumping duties). If 
you are a trade/business association, provide the information, on an 
aggregate basis, for the firms which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total production of Subject Merchandise

[[Page 38691]]

in each Subject Country accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm to produce the Subject 
Merchandise in each Subject Country (i.e., the level of production that 
your establishment(s) could reasonably have expected to attain during 
the year, assuming normal operating conditions (using equipment and 
machinery in place and ready to operate), normal operating levels 
(hours per week/weeks per year), time for downtime, maintenance, 
repair, and cleanup, and a typical or representative product mix); and
    (c) the quantity and value of your firm's(s') exports to the United 
States of Subject Merchandise and, if known, an estimate of the 
percentage of total exports to the United States of Subject Merchandise 
from each Subject Country accounted for by your firm's(s') exports.
    (12) Identify significant changes, if any, in the supply and demand 
conditions or business cycle for the Domestic Like Product that have 
occurred in the United States or in the market for the Subject 
Merchandise in the Subject Country(ies) after 2005, and significant 
changes, if any, that are likely to occur within a reasonably 
foreseeable time. Supply conditions to consider include technology; 
production methods; development efforts; ability to increase production 
(including the shift of production facilities used for other products 
and the use, cost, or availability of major inputs into production); 
and factors related to the ability to shift supply among different 
national markets (including barriers to importation in foreign markets 
or changes in market demand abroad). Demand conditions to consider 
include end uses and applications; the existence and availability of 
substitute products; and the level of competition among the Domestic 
Like Product produced in the United States, Subject Merchandise 
produced in the Subject Country(ies), and such merchandise from other 
countries.
    (13) (Optional) A statement of whether you agree with the above 
definitions of the Domestic Like Product and Domestic Industry; if you 
disagree with either or both of these definitions, please explain why 
and provide alternative definitions.

    Authority: These reviews are being conducted under authority of 
title VII of the Tariff Act of 1930; this notice is published 
pursuant to section 207.61 of the Commission's rules.

    By order of the Commission.

    Issued: June 27, 2011.
James R. Holbein,
Secretary to the Commission.
[FR Doc. 2011-16449 Filed 6-30-11; 8:45 am]
BILLING CODE 7020-02-P