Naval Postgraduate School; Notice of Consolidated Decision on Application for Duty-Free Entry of Electron Microscope, 26694 [2011-11252]

Download as PDF 26694 Federal Register / Vol. 76, No. 89 / Monday, May 9, 2011 / Notices separate rate, the cash deposit rate will be the PRC-wide rate of 55.62 percent; and (4) for all non-PRC exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the PRC exporter that supplied that nonPRC exporter. These deposit requirements, when imposed, shall remain in effect until further notice. Notification to Importers This notice serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. This administrative review and notice are in accordance with sections 751(a)(1) and 777(i) of the Act and 19 CFR 351.213. Dated: May 2, 2011. Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration. [FR Doc. 2011–11253 Filed 5–6–11; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration WReier-Aviles on DSKGBLS3C1PROD with NOTICES Naval Postgraduate School; Notice of Consolidated Decision on Application for Duty-Free Entry of Electron Microscope This is a decision consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials Importation Act of 1966 (Pub. L 89–651, as amended by Pub. L 106– 36; 80 Stat. 897; 15 CFR part 301). Related records can be viewed between 8:30 a.m. and 5 p.m. in Room 3720, U.S. Department of Commerce, 14th and Constitution Avenue, NW., Washington, DC. Docket Number: 11–021. Applicant: Naval Postgraduate School, Monterey, CA 93943. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: See notice at 76 FR 15945, March 22, 2011. Comments: None received. Decision: Approved. No instrument of equivalent scientific value to the foreign instrument, for such purposes as this instrument is intended to be used, is VerDate Mar<15>2010 15:23 May 06, 2011 Jkt 223001 being manufactured in the United States at the time the instrument was ordered. Reasons: Each foreign instrument is an electron microscope and is intended for research or scientific educational uses requiring an electron microscope. We know of no electron microscope, or any other instrument suited to these purposes, which was being manufactured in the United States at the time of order of each instrument. Dated: May 3, 2011. Gregory W. Campbell, Director, Subsidies Enforcement Office, Import Administration. [FR Doc. 2011–11252 Filed 5–6–11; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration UChicago Argonne, LLC, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry of Scientific Instruments This is a decision pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106–36; 80 Stat. 897; 15 CFR part 301). Related records can be viewed between 8:30 a.m. and 5 p.m. in Room 3720, U.S. Department of Commerce, 14th and Constitution Ave., NW., Washington, DC. Docket Number: 11–012. Applicant: UChicago Argonne, LLC, Lemont, IL 60439. Instrument: TFS500 Atomic Layer Deposition System. Manufacturer: Beneq OY, Finland. Intended Use: See notice at 76 FR 15945, March 22, 2011. Comments: None received. Decision: Approved. We know of no instruments of equivalent scientific value to the foreign instruments described below, for such purposes as each is intended to be used, that was being manufactured in the United States at the time of its order. Reasons: Pertinent characteristics of this instrument include its modular deposition chamber in order that the system can be reconfigured to optimize the coating process for different substrates. It also has a precursor delivery system that can be heated to 500 degrees Celsius to vaporize nonvolatile chemical precursors. Lastly, it is capable of inert gas purging between the deposition chamber and outer heating chambers to contain the precursors without the need for a gas-tight seal at this junction. Docket Number: 11–016. Applicant: UChicago Argonne, LLC, Lemont, IL 60439–4873. Instrument: Single Roll Presser. Manufacturer: A-Pro Co., Ltd., PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 South Korea. Intended Use: See notice at 76 FR 15945, March 22, 2011. Comments: None received. Decision: Approved. We know of no instruments of equivalent scientific value to the foreign instruments described below, for such purposes as each is intended to be used, that was being manufactured in the United States at the time of its order. Reasons: The instrument is unique in that it is semi-automated with a high attention to dimensional tolerances, temperature control and safety, which ensures that the research cells made will be of industrial level quality and consistency. Docket Number: 11–018. Applicant: Purdue University, Birck Nanotechnology Center, West Lafayette, IN 47907–2057. Instrument: Rapid Thermal Annealer. Manufacturer: Quailflow Jipelec, France. Intended Use: See notice at 76 FR 15945, March 22, 2011. Comments: None received. Decision: Approved. We know of no instruments of equivalent scientific value to the foreign instruments described below, for such purposes as each is intended to be used, that was being manufactured in the United States at the time of its order. Reasons: Key characteristics of this instrument include a temperature ramp rate of 300 degrees Celsius per second, vacuum purge capability and contamination control. Dated: May 3, 2011. Gregory W. Campbell, Director, Subsidies Enforcement Office, Import Administration. [FR Doc. 2011–11250 Filed 5–6–11; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–533–821] Certain Hot-Rolled Carbon Steel Flat Products From India: Final Rescission of Countervailing Duty Administrative Review Import Administration, International Trade Administration, Department of Commerce. DATES: Effective Date: May 9, 2011. FOR FURTHER INFORMATION CONTACT: Kristen Johnson, AD/CVD Operations, Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Ave., NW., Room 4014, Washington, DC 20230, telephone: (202) 482–4793. SUPPLEMENTARY INFORMATION: AGENCY: E:\FR\FM\09MYN1.SGM 09MYN1

Agencies

[Federal Register Volume 76, Number 89 (Monday, May 9, 2011)]
[Notices]
[Page 26694]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-11252]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Naval Postgraduate School; Notice of Consolidated Decision on 
Application for Duty-Free Entry of Electron Microscope

    This is a decision consolidated pursuant to Section 6(c) of the 
Educational, Scientific, and Cultural Materials Importation Act of 1966 
(Pub. L 89-651, as amended by Pub. L 106-36; 80 Stat. 897; 15 CFR part 
301). Related records can be viewed between 8:30 a.m. and 5 p.m. in 
Room 3720, U.S. Department of Commerce, 14th and Constitution Avenue, 
NW., Washington, DC.
    Docket Number: 11-021. Applicant: Naval Postgraduate School, 
Monterey, CA 93943. Instrument: Electron Microscope. Manufacturer: FEI 
Company, Czech Republic. Intended Use: See notice at 76 FR 15945, March 
22, 2011.
    Comments: None received. Decision: Approved. No instrument of 
equivalent scientific value to the foreign instrument, for such 
purposes as this instrument is intended to be used, is being 
manufactured in the United States at the time the instrument was 
ordered. Reasons: Each foreign instrument is an electron microscope and 
is intended for research or scientific educational uses requiring an 
electron microscope. We know of no electron microscope, or any other 
instrument suited to these purposes, which was being manufactured in 
the United States at the time of order of each instrument.

    Dated: May 3, 2011.
Gregory W. Campbell,
Director, Subsidies Enforcement Office, Import Administration.
[FR Doc. 2011-11252 Filed 5-6-11; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.