Stainless Steel Bar From Brazil: Final Results of Antidumping Duty Administrative Review, 1599-1600 [2011-395]

Download as PDF Federal Register / Vol. 76, No. 7 / Tuesday, January 11, 2011 / Notices If this study proves successful, it may also provide an option for future FHWAR surveys and other Census Bureau surveys interested in reducing field data collection costs. Affected Public: Households or individuals. Frequency: One-time. Respondent’s Obligation: Voluntary. Legal Authority: Title 13 U.S.C., Section 8(b). OMB Desk Officer: Brian HarrisKojetin, (202) 395–7314. Copies of the above information collection proposal can be obtained by calling or writing Diana Hynek, Departmental Paperwork Clearance Officer, (202) 482–0266, Department of Commerce, Room 6616, 14th and Constitution Avenue, NW., Washington, DC 20230 (or via the Internet at dhynek@doc.gov). Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to Brian Harris-Kojetin,OMB Desk Officer either by fax (202–395– 7245) or e-mail (bharrisk@omb.eop.gov). Dated: January 6, 2011. Glenna Mickelson, Management Analyst, Office of the Chief Information Officer. [FR Doc. 2011–313 Filed 1–10–11; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket 4–2011] mstockstill on DSKH9S0YB1PROD with NOTICES Foreign-Trade Zone 203—Moses Lake, Washington; Application for Manufacturing Authority, SGL Automotive Carbon Fibers, LLC, (Carbon Fiber Manufacturing), Moses Lake, WA An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Port of Moses Lake Public Corporation, grantee of FTZ 203, requesting export-only manufacturing authority on behalf of SGL Automotive Carbon Fibers, LLC (SGL Automotive), located in Moses Lake, Washington. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the Board (15 CFR part 400), specifically Section 400.32(b)(1). It was formally filed on January 4, 2011. The SGL Automotive facility (12 employees initially and up to 250 employees at full production; 60 acres) is located within Site 3 of FTZ 203. This VerDate Mar<15>2010 17:33 Jan 10, 2011 Jkt 223001 new facility will be used for the manufacture of carbon fiber, all of which will be exported for the exclusive use of BMW Group in its new electric car production. This application requests authority to allow SGL Automotive to conduct manufacturing of carbon fiber (1,500 metric tons at the outset and up to 15,000 metric tons at full capacity) under FTZ procedures for export. Foreign-origin polyacrylonitrile (PAN) fiber (HTSUS 5501.30, duty rate: 7.5%) will be used as the primary production input, which represents some 45 percent of finished product value. FTZ procedures could exempt SGL Automotive from customs duty payments on the PAN fiber used in export production (100 percent of shipments). FTZ designation could further allow SGL Automotive to realize certain customs-related logistical benefits. Customs duties also could possibly be deferred or reduced on foreign status production equipment. The request indicates that the savings from FTZ procedures would help improve the plant’s international competitiveness. In accordance with the Board’s regulations, Diane Finver of the FTZ Staff is designated examiner to evaluate and analyze the facts and information presented in the application and case record and to report findings and recommendations to the Board. Public comment is invited from interested parties. Submissions (original and 3 copies) shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is February 10, 2011. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to February 25, 2011. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue, NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via https:// www.trade.gov/ftz. For further information, contact Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. Dated: January 4, 2011. Andrew McGilvray, Executive Secretary. [FR Doc. 2011–398 Filed 1–10–11; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 1599 DEPARTMENT OF COMMERCE International Trade Administration [A–351–825] Stainless Steel Bar From Brazil: Final Results of Antidumping Duty Administrative Review Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On November 3, 2010, the Department of Commerce (the Department) published the preliminary results of its administrative review of the antidumping duty order on stainless steel bar from Brazil. The review covers one producer/exporter of the subject merchandise, Villares Metals S.A. (VMSA). The period of review is February 1, 2009, through January 31, 2010. We gave interested parties an opportunity to comment on our preliminary results. We received no comments on our preliminary results. The final weighted-average dumping margin for VMSA is listed below in the ‘‘Final Results of Review’’ section of this notice. DATES: Effective Date: January 11, 2011. FOR FURTHER INFORMATION CONTACT: Sandra Stewart or Minoo Hatten, AD/ CVD Operations, Office 5, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230, telephone: (202) 482–0768 or (202) 482– 1690, respectively. SUPPLEMENTARY INFORMATION: AGENCY: Background On November 3, 2010, the Department published the preliminary results of its administrative review of the antidumping duty order on stainless steel bar (SSB) from Brazil. See Stainless Steel Bar From Brazil: Preliminary Results of Antidumping Duty Administrative Review, 75 FR 67689 (November 3, 2010) (Preliminary Results). We invited interested parties to comment on the Preliminary Results. We did not receive comments from any interested parties. The Department has conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act). Scope of the Order The scope of the order covers SSB. The term SSB with respect to the order means articles of stainless steel in straight lengths that have been either hot-rolled, forged, turned, cold-drawn, cold-rolled or otherwise cold-finished, E:\FR\FM\11JAN1.SGM 11JAN1 1600 Federal Register / Vol. 76, No. 7 / Tuesday, January 11, 2011 / Notices or ground, having a uniform solid cross section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles, hexagons, octagons or other convex polygons. SSB includes coldfinished SSBs that are turned or ground in straight lengths, whether produced from hot-rolled bar or from straightened and cut rod or wire, and reinforcing bars that have indentations, ribs, grooves, or other deformations produced during the rolling process. Except as specified above, the term does not include stainless steel semi-finished products, cut-length flat-rolled products (i.e., cutlength rolled products which if less than 4.75 mm in thickness have a width measuring at least 10 times the thickness, or if 4.75 mm or more in thickness having a width which exceeds 150 mm and measures at least twice the thickness), wire (i.e., cold-formed products in coils, of any uniform solid cross section along their whole length, which do not conform to the definition of flat-rolled products), and angles, shapes and sections. The SSB subject to the order is currently classifiable under subheadings 7222.10.0005, 7222.10.0050, 7222.20.0005, 7222.20.0045, 7222.20.0075, and 7222.30.0000 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the order is dispositive. mstockstill on DSKH9S0YB1PROD with NOTICES Changes Since the Preliminary Results We identified a slight programming syntax error in our calculations after publication of the Preliminary Results. We have corrected the syntax error for the final results. Despite this correction, the dumping margin for VMSA remains unchanged. For a more detailed description of this change please see the final analysis memorandum for VMSA, dated concurrently with this notice, which is on file in the Department’s Central Records Unit, Room 7046 of the main Commerce building. Final Results of Review As announced in the Preliminary Results, we disregarded sales at prices below cost in the home market when determining normal value in the course of this administrative review. As a result of our review, we determine that the weighted-average dumping margin of 4.07 percent exists for VMSA for the period February 1, 2009, through January 31, 2010. Assessment Rates The Department shall determine, and CBP shall assess, antidumping duties on VerDate Mar<15>2010 17:33 Jan 10, 2011 Jkt 223001 all appropriate entries. In accordance with 19 CFR 351.212(b)(1), we have calculated importer/customer-specific assessment rates for these final results of review. For sales where VMSA reported entered value, we divided the total dumping margins (calculated as the difference between normal value and EP) for the reviewed sales by the total entered value of those reviewed sales for each reported importer or customer. For sales where entered value was not reported, we divided the total dumping margins for each exporter’s importer or customer by the total number of units the exporter sold to that importer or customer. We will instruct CBP to assess the resulting importer/customer-specific ad-valorem rate or per-unit dollar amount, as appropriate, on all entries of subject merchandise made by the relevant importer or customer during the period of review. See 19 CFR 351.212(b). The Department clarified its ‘‘automatic assessment’’ regulation on May 6, 2003. This clarification will apply to entries of subject merchandise during the period of review produced by VMSA for which VMSA did not know its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries of VMSA-produced merchandise at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). The Department intends to issue instructions to CBP 15 days after the publication of these final results of review. Cash-Deposit Requirements The following deposit requirements will be effective upon publication of this notice of final results of administrative review for all shipments of SSB from Brazil entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2)(C) of the Act: (1) The cashdeposit rate for VMSA will be 4.07 percent; (2) for previously reviewed or investigated companies not listed above, the cash-deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the less-thanfair-value investigation but the manufacturer is, the cash-deposit rate will be the rate established for the most recent period for the manufacturer of PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 the merchandise; (4) if neither the exporter nor the manufacturer has its own rate, the cash-deposit rate will be the all-others rate for this proceeding, 19.43 percent. See Notice of Final Determination of Sales at Less Than Fair Value: Stainless Steel Bar From Brazil, 59 FR 66914 (December 28, 1994). These deposit requirements shall remain in effect until further notice. Notification to Parties This notice serves as a reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties. This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. These final results of administrative review are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act. Dated: January 4, 2011. Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration. [FR Doc. 2011–395 Filed 1–10–11; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration U.S. Aerospace Supplier & Investment Mission International Trade Administration, Department of Commerce. ACTION: Notice. AGENCY: Mission Description The United States Department of Commerce, International Trade Administration, U.S. and Foreign Commercial Service is organizing a U.S. Aerospace Supplier & Investment Mission to Montreal, Canada on May 2–4, 2011. This aerospace mission is an E:\FR\FM\11JAN1.SGM 11JAN1

Agencies

[Federal Register Volume 76, Number 7 (Tuesday, January 11, 2011)]
[Notices]
[Pages 1599-1600]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-395]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-351-825]


Stainless Steel Bar From Brazil: Final Results of Antidumping 
Duty Administrative Review

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.
SUMMARY: On November 3, 2010, the Department of Commerce (the 
Department) published the preliminary results of its administrative 
review of the antidumping duty order on stainless steel bar from 
Brazil. The review covers one producer/exporter of the subject 
merchandise, Villares Metals S.A. (VMSA). The period of review is 
February 1, 2009, through January 31, 2010. We gave interested parties 
an opportunity to comment on our preliminary results. We received no 
comments on our preliminary results. The final weighted-average dumping 
margin for VMSA is listed below in the ``Final Results of Review'' 
section of this notice.

DATES: Effective Date: January 11, 2011.

FOR FURTHER INFORMATION CONTACT: Sandra Stewart or Minoo Hatten, AD/CVD 
Operations, Office 5, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW., Washington, DC 20230, telephone: (202) 482-
0768 or (202) 482-1690, respectively.

SUPPLEMENTARY INFORMATION:

Background

    On November 3, 2010, the Department published the preliminary 
results of its administrative review of the antidumping duty order on 
stainless steel bar (SSB) from Brazil. See Stainless Steel Bar From 
Brazil: Preliminary Results of Antidumping Duty Administrative Review, 
75 FR 67689 (November 3, 2010) (Preliminary Results). We invited 
interested parties to comment on the Preliminary Results. We did not 
receive comments from any interested parties.
    The Department has conducted this administrative review in 
accordance with section 751 of the Tariff Act of 1930, as amended (the 
Act).

Scope of the Order

    The scope of the order covers SSB. The term SSB with respect to the 
order means articles of stainless steel in straight lengths that have 
been either hot-rolled, forged, turned, cold-drawn, cold-rolled or 
otherwise cold-finished,

[[Page 1600]]

or ground, having a uniform solid cross section along their whole 
length in the shape of circles, segments of circles, ovals, rectangles 
(including squares), triangles, hexagons, octagons or other convex 
polygons. SSB includes cold-finished SSBs that are turned or ground in 
straight lengths, whether produced from hot-rolled bar or from 
straightened and cut rod or wire, and reinforcing bars that have 
indentations, ribs, grooves, or other deformations produced during the 
rolling process. Except as specified above, the term does not include 
stainless steel semi-finished products, cut-length flat-rolled products 
(i.e., cut-length rolled products which if less than 4.75 mm in 
thickness have a width measuring at least 10 times the thickness, or if 
4.75 mm or more in thickness having a width which exceeds 150 mm and 
measures at least twice the thickness), wire (i.e., cold-formed 
products in coils, of any uniform solid cross section along their whole 
length, which do not conform to the definition of flat-rolled 
products), and angles, shapes and sections. The SSB subject to the 
order is currently classifiable under subheadings 7222.10.0005, 
7222.10.0050, 7222.20.0005, 7222.20.0045, 7222.20.0075, and 
7222.30.0000 of the Harmonized Tariff Schedule of the United States 
(HTSUS). Although the HTSUS subheadings are provided for convenience 
and customs purposes, the written description of the scope of the order 
is dispositive.

Changes Since the Preliminary Results

    We identified a slight programming syntax error in our calculations 
after publication of the Preliminary Results. We have corrected the 
syntax error for the final results. Despite this correction, the 
dumping margin for VMSA remains unchanged. For a more detailed 
description of this change please see the final analysis memorandum for 
VMSA, dated concurrently with this notice, which is on file in the 
Department's Central Records Unit, Room 7046 of the main Commerce 
building.

Final Results of Review

    As announced in the Preliminary Results, we disregarded sales at 
prices below cost in the home market when determining normal value in 
the course of this administrative review. As a result of our review, we 
determine that the weighted-average dumping margin of 4.07 percent 
exists for VMSA for the period February 1, 2009, through January 31, 
2010.

Assessment Rates

    The Department shall determine, and CBP shall assess, antidumping 
duties on all appropriate entries. In accordance with 19 CFR 
351.212(b)(1), we have calculated importer/customer-specific assessment 
rates for these final results of review. For sales where VMSA reported 
entered value, we divided the total dumping margins (calculated as the 
difference between normal value and EP) for the reviewed sales by the 
total entered value of those reviewed sales for each reported importer 
or customer. For sales where entered value was not reported, we divided 
the total dumping margins for each exporter's importer or customer by 
the total number of units the exporter sold to that importer or 
customer. We will instruct CBP to assess the resulting importer/
customer-specific ad-valorem rate or per-unit dollar amount, as 
appropriate, on all entries of subject merchandise made by the relevant 
importer or customer during the period of review. See 19 CFR 
351.212(b).
    The Department clarified its ``automatic assessment'' regulation on 
May 6, 2003. This clarification will apply to entries of subject 
merchandise during the period of review produced by VMSA for which VMSA 
did not know its merchandise was destined for the United States. In 
such instances, we will instruct CBP to liquidate unreviewed entries of 
VMSA-produced merchandise at the all-others rate if there is no rate 
for the intermediate company(ies) involved in the transaction. For a 
full discussion of this clarification, see Antidumping and 
Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 
FR 23954 (May 6, 2003).
    The Department intends to issue instructions to CBP 15 days after 
the publication of these final results of review.

Cash-Deposit Requirements

    The following deposit requirements will be effective upon 
publication of this notice of final results of administrative review 
for all shipments of SSB from Brazil entered, or withdrawn from 
warehouse, for consumption on or after the date of publication, as 
provided by section 751(a)(2)(C) of the Act: (1) The cash-deposit rate 
for VMSA will be 4.07 percent; (2) for previously reviewed or 
investigated companies not listed above, the cash-deposit rate will 
continue to be the company-specific rate published for the most recent 
period; (3) if the exporter is not a firm covered in this review, a 
prior review, or the less-than-fair-value investigation but the 
manufacturer is, the cash-deposit rate will be the rate established for 
the most recent period for the manufacturer of the merchandise; (4) if 
neither the exporter nor the manufacturer has its own rate, the cash-
deposit rate will be the all-others rate for this proceeding, 19.43 
percent. See Notice of Final Determination of Sales at Less Than Fair 
Value: Stainless Steel Bar From Brazil, 59 FR 66914 (December 28, 
1994). These deposit requirements shall remain in effect until further 
notice.

Notification to Parties

    This notice serves as a reminder to importers of their 
responsibility under 19 CFR 351.402(f) to file a certificate regarding 
the reimbursement of antidumping duties prior to liquidation of the 
relevant entries during this review period. Failure to comply with this 
requirement could result in the Department's presumption that 
reimbursement of antidumping duties occurred and the subsequent 
assessment of doubled antidumping duties.
    This notice also serves as a reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the 
destruction of APO materials or conversion to judicial protective order 
is hereby requested. Failure to comply with the regulations and the 
terms of an APO is a sanctionable violation.
    These final results of administrative review are issued and 
published in accordance with sections 751(a)(1) and 777(i)(1) of the 
Act.

    Dated: January 4, 2011.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
[FR Doc. 2011-395 Filed 1-10-11; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.