Agency Information Collection Activities; Submission for OMB Review; Comment Request; Welding, Cutting and Brazing, 74083-74084 [2010-30045]

Download as PDF jdjones on DSK8KYBLC1PROD with NOTICES Federal Register / Vol. 75, No. 229 / Tuesday, November 30, 2010 / Notices Washington, DC 20503, Telephone: 202–395–6929/Fax: 202–395–6881 (these are not toll-free numbers), e-mail: OIRA_submission@omb.eop.gov. FOR FURTHER INFORMATION: Contact Michel Smyth by telephone at 202–693– 4129 (this is not a toll-free number) or by e-mail at DOL_PRA_PUBLIC@dol.gov. SUPPLEMENTARY INFORMATION: Form ETA 678 is used to obtain information about student training for placement of students in jobs, further education or military service. The form used to evaluate overall program effectiveness and is the only form that documents a student’s post-center status. The form is prepared by Job Corps centers and placement specialists for each student separating from Job Corps centers. This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless it is currently approved by the OMB under the PRA and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for failing to comply with a collection of information if the collection of information does not display a currently valid OMB control number. See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this information collection under OMB Control Number 1205–0035. The current OMB approval is scheduled to expire on November 30, 2010; however, it should be noted that information collections submitted to the OMB receive a month-to-month extension while they undergo review. For additional information, see the related notice published in the Federal Register on August 20, 2010 (75 FR 51484). Interested parties are encouraged to send comments to the OMB, Office of Information and Regulatory Affairs at the address shown in the ADDRESSES section within 30 days of publication of this notice in the Federal Register. In order to ensure the appropriate consideration, comments should reference OMB Control Number 1205– 0035. The OMB is particularly interested in comments that: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; • Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, VerDate Mar<15>2010 15:13 Nov 29, 2010 Jkt 223001 including the validity of the methodology and assumptions used; • Enhance the quality, utility, and clarity of the information to be collected; and • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Agency: Employment and Training Administration (ETA). Type of Review: Extension without change of a currently approved collection. Title of Collection: Job Corps Health Questionnaire. Form Number: ETA 678. OMB Control Number: 1205–0035. Affected Public: Individuals or Households. Total Estimated Number of Respondents: 40,000. Total Estimated Number of Responses: 40,000. Total Estimated Annual Burden Hours: 4,953. Total Estimated Annual Costs Burden: $39,737. Dated: November 22, 2010. Michel Smyth, Departmental Clearance Officer. [FR Doc. 2010–29983 Filed 11–29–10; 8:45 am] BILLING CODE 4510–30–P DEPARTMENT OF LABOR Office of the Secretary Agency Information Collection Activities; Submission for OMB Review; Comment Request; Welding, Cutting and Brazing ACTION: Notice. The Department of Labor (DOL) hereby announces the submission of the Occupational Safety and Health Administration (OSHA) sponsored information collection request (ICR) titled, ‘‘Welding, Cutting and Brazing,’’ to the Office of Management and Budget (OMB) for review and approval for continued use in accordance with the Paperwork Reduction Act of 1995 (Pub. L. 104–13, 44 U.S.C. chapter 35). DATES: Submit comments on or before December 30, 2010. ADDRESSES: A copy of this ICR, with applicable supporting documentation; including a description of the likely respondents, proposed frequency of response, and estimated total burden SUMMARY: PO 00000 Frm 00085 Fmt 4703 Sfmt 4703 74083 may be obtained from the RegInfo.gov Web site, https://www.reginfo.gov/ public/do/PRAMain or by contacting Michel Smyth by telephone at 202–693– 4129 (this is not a toll-free number) or sending an email to DOL_PRA_PUBLIC@dol.gov. Submit comments about this request to the Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health Administration (OSHA), Office of Management and Budget, Room 10235, Washington, DC 20503, Telephone: 202–395–6929/Fax: 202–395–6881 (these are not toll-free numbers), e-mail: OIRA_submission@omb.eop.gov. FOR FURTHER INFORMATION CONTACT: Contact Michel Smyth by telephone at 202–693–4129 (this is not a toll-free number) or by email at DOL_PRA_PUBLIC@dol.gov. SUPPLEMENTARY INFORMATION: This ICR relates to the regulatory requirement that a periodic inspection of resistance welding equipment be made by qualified maintenance personnel and that a certification record be generated and maintained. The certification shall include the date of the inspection, the signature of the person who performed the inspection, and the serial number or other identifier for the equipment inspected. The record shall be made available to an OSHA inspector upon request. The maintenance inspection ensures that welding equipment is in safe operating condition while the maintenance record provides evidence to workers and Agency compliance officers that employers performed the required inspections. This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless it is currently approved by the OMB under the PRA and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for failing to comply with a collection of information if the collection of information does not display a currently valid OMB control number. See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this information collection under OMB Control Number 1218–0207. The current OMB approval is scheduled to expire on November 30, 2010; however, it should be noted that information collections submitted to the OMB receive a month-to-month extension while they undergo review. For E:\FR\FM\30NON1.SGM 30NON1 jdjones on DSK8KYBLC1PROD with NOTICES 74084 Federal Register / Vol. 75, No. 229 / Tuesday, November 30, 2010 / Notices additional information, see the related notice published in the Federal Register on August 24, 2010 (75 FR 52037). Interested parties are encouraged to send comments to the OMB, Office of Information and Regulatory Affairs at the address shown in the ADDRESSES section within 30 days of publication of this notice in the Federal Register. In order to ensure the appropriate consideration, comments should reference OMB Control Number 1218– 0207. The OMB is particularly interested in comments that: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; • Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; • Enhance the quality, utility, and clarity of the information to be collected; and • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses. Agency: Occupational Safety and Health Administration (OSHA). Type of Review: Extension without change of a currently approved collection. Title of Collection: Welding, Cutting and Brazing. OMB Control Number: 1218–0207. Affected Public: Private sector— Businesses or other for profits. Total Estimated Number of Respondents: 21,164. Total Estimated Number of Responses: 84,952. Total Estimated Annual Burden Hours: 5,935. Total Estimated Annual Costs Burden: $0. Dated: November 23, 2010. Michel Smyth, Departmental Clearance Officer. [FR Doc. 2010–30045 Filed 11–29–10; 8:45 am] BILLING CODE 4510–26–P VerDate Mar<15>2010 15:13 Nov 29, 2010 Jkt 223001 DEPARTMENT OF LABOR Office of the Secretary Agency Information Collection Activities; Submission for OMB Review; Comment Request; Portable Fire Extinguishers—Annual Maintenance Certification Record ACTION: Notice. The Department of Labor (DOL) hereby announces the submission of the Occupational Safety and Health Administration (OSHA) sponsored information collection request (ICR) titled, ‘‘Portable Fire Extinguishers— Annual Maintenance Certification Record,’’ to the Office of Management and Budget (OMB) for review and approval for continued use in accordance with the Paperwork Reduction Act of 1995 (Pub. L. 104–13, 44 U.S.C. chapter 35). DATES: Submit comments on or before December 30, 2010. ADDRESSES: A copy of this ICR, with applicable supporting documentation; including a description of the likely respondents, proposed frequency of response, and estimated total burden may be obtained from the RegInfo.gov Web site, https://www.reginfo.gov/ public/do/PRAMain or by contacting Michel Smyth by telephone at 202–693– 4129 (this is not a toll-free number) or sending an e-mail to DOL_PRA_PUBLIC@dol.gov. Submit comments about this request to the Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health Administration (OSHA), Office of Management and Budget, Room 10235, Washington, DC 20503, Telephone: 202–395–6929/Fax: 202–395–6881 (these are not toll-free numbers), e-mail: OIRA_submission@omb.eop.gov. FOR FURTHER INFORMATION CONTACT: Contact Michel Smyth by telephone at 202–693–4129 (this is not a toll-free number) or by e-mail at DOL_PRA_PUBLIC@dol.gov. SUMMARY: This ICR relates to the regulatory requirement that employers must subject each portable fire extinguisher to an annual maintenance inspection and record the date of the inspection. This provision requires employers to retain the inspection record for one year after the last entry or for the life of the shell, whichever is less, and to make the record available to OSHA on request. This recordkeeping requirement assures employees and OSHA compliance SUPPLEMENTARY INFORMATION: PO 00000 Frm 00086 Fmt 4703 Sfmt 4703 officers that portable fire extinguishers located in the workplace will operate normally in case of fire; in addition, this requirement provides evidence to OSHA compliance officers during an inspection that the employer performed the required maintenance checks on the portable fire extinguishers. This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless it is currently approved by the OMB under the PRA and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for failing to comply with a collection of information if the collection of information does not display a currently valid OMB Control Number. See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this information collection under OMB Control Number 1218–0238. The current OMB approval is scheduled to expire on November 30, 2010; however, it should be noted that information collections submitted to the OMB receive a month-to-month extension while they undergo review. For additional information, see the related notice published in the Federal Register on August 24, 2010 (75 FR 52034). Interested parties are encouraged to send comments to the OMB, Office of Information and Regulatory Affairs at the address shown in the ADDRESSES section within 30 days of publication of this notice in the Federal Register. In order to ensure the appropriate consideration, comments should reference OMB Control Number 1218– 0238. The OMB is particularly interested in comments that: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; • Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; • Enhance the quality, utility, and clarity of the information to be collected; and • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, E:\FR\FM\30NON1.SGM 30NON1

Agencies

[Federal Register Volume 75, Number 229 (Tuesday, November 30, 2010)]
[Notices]
[Pages 74083-74084]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-30045]

-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Office of the Secretary

Agency Information Collection Activities; Submission for OMB
Review; Comment Request; Welding, Cutting and Brazing

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Department of Labor (DOL) hereby announces the submission
of the Occupational Safety and Health Administration (OSHA) sponsored
information collection request (ICR) titled, ``Welding, Cutting and
Brazing,'' to the Office of Management and Budget (OMB) for review and
approval for continued use in accordance with the Paperwork Reduction
Act of 1995 (Pub. L. 104-13, 44 U.S.C. chapter 35).

DATES: Submit comments on or before December 30, 2010.

ADDRESSES: A copy of this ICR, with applicable supporting
documentation; including a description of the likely respondents,
proposed frequency of response, and estimated total burden may be
obtained from the RegInfo.gov Web site, https://www.reginfo.gov/public/do/PRAMain or by contacting Michel Smyth by telephone at 202-693-4129
(this is not a toll-free number) or sending an email to DOL_PRA_PUBLIC@dol.gov.
Submit comments about this request to the Office of Information and
Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor,
Occupational Safety and Health Administration (OSHA), Office of
Management and Budget, Room 10235, Washington, DC 20503, Telephone:
202-395-6929/Fax: 202-395-6881 (these are not toll-free numbers), e-
mail: OIRA_submission@omb.eop.gov.

FOR FURTHER INFORMATION CONTACT: Contact Michel Smyth by telephone at
202-693-4129 (this is not a toll-free number) or by email at DOL_PRA_PUBLIC@dol.gov.

SUPPLEMENTARY INFORMATION: This ICR relates to the regulatory
requirement that a periodic inspection of resistance welding equipment
be made by qualified maintenance personnel and that a certification
record be generated and maintained. The certification shall include the
date of the inspection, the signature of the person who performed the
inspection, and the serial number or other identifier for the equipment
inspected. The record shall be made available to an OSHA inspector upon
request. The maintenance inspection ensures that welding equipment is
in safe operating condition while the maintenance record provides
evidence to workers and Agency compliance officers that employers
performed the required inspections.
This information collection is subject to the PRA. A Federal agency
generally cannot conduct or sponsor a collection of information, and
the public is generally not required to respond to an information
collection, unless it is currently approved by the OMB under the PRA
and displays a currently valid OMB Control Number. In addition,
notwithstanding any other provisions of law, no person shall generally
be subject to penalty for failing to comply with a collection of
information if the collection of information does not display a
currently valid OMB control number. See 5 CFR 1320.5(a) and 1320.6. The
DOL obtains OMB approval for this information collection under OMB
Control Number 1218-0207. The current OMB approval is scheduled to
expire on November 30, 2010; however, it should be noted that
information collections submitted to the OMB receive a month-to-month
extension while they undergo review. For

[[Page 74084]]

additional information, see the related notice published in the Federal
Register on August 24, 2010 (75 FR 52037).
Interested parties are encouraged to send comments to the OMB,
Office of Information and Regulatory Affairs at the address shown in
the ADDRESSES section within 30 days of publication of this notice in
the Federal Register. In order to ensure the appropriate consideration,
comments should reference OMB Control Number 1218-0207. The OMB is
particularly interested in comments that:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility;
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used;
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Agency: Occupational Safety and Health Administration (OSHA).
Type of Review: Extension without change of a currently approved
collection.
Title of Collection: Welding, Cutting and Brazing.
OMB Control Number: 1218-0207.
Affected Public: Private sector--Businesses or other for profits.
Total Estimated Number of Respondents: 21,164.
Total Estimated Number of Responses: 84,952.
Total Estimated Annual Burden Hours: 5,935.
Total Estimated Annual Costs Burden: $0.

Dated: November 23, 2010.
Michel Smyth,
Departmental Clearance Officer.
[FR Doc. 2010-30045 Filed 11-29-10; 8:45 am]
BILLING CODE 4510-26-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.