Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of Antidumping Duty Order, 64246-64247 [2010-26268]

Download as PDF 64246 Federal Register / Vol. 75, No. 201 / Tuesday, October 19, 2010 / Notices information collection should be sent within 30 days of publication of this notice to OIRA_Submission@omb.eop.gov. Dated: October 14, 2010. Gwellnar Banks, Management Analyst, Office of the Chief Information Officer. [FR Doc. 2010–26252 Filed 10–18–10; 8:45 am] BILLING CODE 3510–22–P DEPARTMENT OF COMMERCE Submission for OMB Review; Comment Request The Department of Commerce will submit to the Office of Management and Budget (OMB) for clearance the following proposal for collection of information under the provisions of the Paperwork Reduction Act (44 U.S.C. Chapter 35). Agency: National Oceanic and Atmospheric Administration (NOAA). Title: Highly Migratory Species Dealer Reporting Family of Forms. OMB Control Number: 0648–0040. Form Number(s): 88–14. Type of Request: Regular submission (renewal of an existing information collection). Number of Respondents: 1,832. Average Hours per Response: Catch documents, export/re-export certificates and statistical documents, 5 minutes; validation of these documents, 15 minutes; nongovernmental validation authorization, 2 hours; Atlantic bluefin tuna daily landing report and tag, 3 minutes; biweekly landing reports, 15 minutes; biweekly negative landing reports, 15 minutes. Burden Hours: 6,735. Needs and Uses: Under the provisions of the Magnuson-Stevens Fishery Conservation and Management Act (16 U.S.C. 1801 et seq.), the National Marine Fisheries Service (NMFS) is responsible for management of the Nation’s marine fisheries. NMFS must also carry out, as necessary and appropriate, obligations the United States undertakes internationally regarding tuna management through the Atlantic Tunas Convention Act (16 U.S.C. 971 et seq.). NMFS must collect domestic landings data for Atlantic highly migratory species via dealer reports in order to provide information vital for fishery management. In addition, the United States must monitor the import, export, and re-export of bluefin tuna, frozen bigeye tuna, and swordfish in order to comply with international obligations established through membership in the International Commission for the Conservation of Atlantic Tunas (ICCAT). ICCAT has implemented a trade monitoring program for bluefin tuna, frozen bigeye tuna, and swordfish to discourage illegal, unregulated, and unreported fishing activities as well as to further understand catches of and international trade in these species. Similar objectives are the basis for the Southern bluefin tuna trade monitoring program established by the Commission for the Conservation of Southern Bluefin Tuna (CCSBT). Although the United States is not a member of the CCSBT, effective management of the Southern bluefin tuna resource is in the best interest of affected parties in the United States. Thus, the United States has implemented the CCSBT trade monitoring program, along with the analogous ICCAT programs. This collection serves as a family of forms for Atlantic highly migratory species dealer reporting requirements, including the purchase of highly migratory species from fishermen, and the import, export, and/or re-export of highly migratory species. Affected Public: Business or other forprofit organizations. Frequency: Daily, biweekly and on occasion. Respondent’s Obligation: Mandatory. OMB Desk Officer: OIRA_Submission@omb.eop.gov. Copies of the above information collection proposal can be obtained by calling or writing Diana Hynek, Departmental Paperwork Clearance Officer, (202) 482–0266, Department of Commerce, Room 6616, 14th and Constitution Avenue, NW., Washington, DC 20230 (or via the Internet at dHynek@doc.gov). Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to OIRA_Submission@omb.eop.gov. Dated: October 14, 2010. Gwellnar Banks, Management Analyst, Office of the Chief Information Officer. [FR Doc. 2010–26277 Filed 10–18–10; 8:45 am] BILLING CODE 3510–22–P DEPARTMENT OF COMMERCE International Trade Administration [A–351–828] Certain Hot-Rolled Flat-Rolled CarbonQuality Steel Products From Brazil: Correction to Notice of Antidumping Duty Order Import Administration, International Trade Administration, Department of Commerce. AGENCY: DATES: Effective Date: October 19, 2010. FOR FURTHER INFORMATION CONTACT: David Cordell or Ericka Ukrow, AD/ CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482–0408 or (202) 482– 0405, respectively. Correction On March 12, 2002, the Department published a notice of antidumping duty order for certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled Flat-Rolled CarbonQuality Steel Products From Brazil, 67 FR 11093 (March 12, 2002) (‘‘Order’’). The Order states incorrectly that ‘‘certain hot-rolled steel coil which meets the following chemical, physical and mechanical specifications is outside and/or specifically excluded from the scope of the order.’’ Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: Mn P S Si Cr Cu Ni 0.10–0.14% mstockstill on DSKH9S0YB1PROD with NOTICES C 0.90% Max. 0.025% Max. 0.005% Max. 0.30–0.50% 0.30–0.50% 0.20–0.40% 0.20% Max. Width = 44.80 inches maximum; Thickness = 0.063–0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile Strength = 70,000–88,000 psi. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: VerDate Mar<15>2010 16:24 Oct 18, 2010 Jkt 223001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\19OCN1.SGM 19OCN1 64247 Federal Register / Vol. 75, No. 201 / Tuesday, October 19, 2010 / Notices C Mn P S Si Cr Cu Ni Mo 0.10–0.16% 0.70—0.90% 0.025% Max. 0.006% Max. 0.30–0.50% 0.30–0.50% 0.25% Max. 0.20% Max. 0.21% Max. Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. C Mn P S Si Cr Cu Ni Nb Ca Al 0.15% Max. 1.40% Max. 0.025% Max. 0.010% Max. 0.50% Max. 1.00% Max. 0.50% Max. 0.20% Max. 0.005% Min. Treated 0.01—0.70% Max. Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094. meets the following chemical, physical and mechanical specifications is excluded from the scope of the order.1 Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: The final three incorrectly state (1) ‘‘subject to this agreement’’ (2) ‘‘covered by this agreement’’ and (3) ‘‘under this agreement.’’ The Order is hereby corrected to read that certain hot-rolled steel coil which In addition, the terminology in the ‘‘scope of the order’’ section incorrectly uses the word ‘‘agreement’’ seven times instead of referring to the ‘‘order’’ itself. The first four instances incorrectly uses the phrase ‘‘scope of this agreement.’’ C Mn P S Si Cr Cu Ni 0.10–0.14% 0.90% Max. 0.025% Max. 0.005% Max. 0.30–0.50% 0.50–0.70% 0.20–0.40% 0.20% Max. Width = 44.80 inches maximum; Thickness = 0.063–0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile Strength = 70,000–88,000 psi. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Mo 0.10–0.16% 0.70—0.90% 0.025% Max. 0.006% Max. 0.30–0.50% 0.50–0.70% 0.25% Max. 0.20% Max. 0.21% Max. Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim. Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications: C Mn P S Si Cr Cu Ni Nb Ca Al 0.15% Max. 1.40% Max. 0.025% Max. 0.010% Max. 0.50% Max. 1.00% Max. 0.50% Max. 0.20% Max. 0.005% Min. Treated 0.01–0.07% Max. Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094. The Order is hereby corrected to refer to itself as an ‘‘order’’ in all cases where ‘‘agreement’’ was used in the ‘‘scope of the order’’ section of the Order. This notice is published in accordance with section 777(i) of the Tariff Act of 1930, as amended. DEPARTMENT OF COMMERCE Dated: October 12, 2010 Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration. AGENCY: RIN 0648–XZ51 Marine Mammals; File No. 15543 National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice; receipt of application. [FR Doc. 2010–26268 Filed 10–18–10; 8:45 am] BILLING CODE 3510–DS–P mstockstill on DSKH9S0YB1PROD with NOTICES National Oceanic and Atmospheric Administration Notice is hereby given that Randall S. Wells, PhD (Principal Investigator), Sarasota Dolphin Research Program, c/o Mote Marine Laboratory, 1600 Ken Thompson Parkway, Sarasota, FL 34236, has applied in due form for a permit to conduct research on SUMMARY: bottlenose dolphins (Tursiops truncatus). Written, telefaxed, or e-mail comments must be received on or before November 18, 2010. ADDRESSES: The application and related documents are available for review by selecting ‘‘Records Open for Public Comment’’ from the Features box on the Applications and Permits for Protected Species (APPS) home page, https:// apps.nmfs.noaa.gov, and then selecting File No. 15543 from the list of available applications. These documents are also available upon written request or by appointment in the following office(s): Permits, Conservation and Education Division, Office of Protected Resources, NMFS, 1315 East-West Highway, Room DATES: 1 See also the Antidumping Duty Order; Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Japan, 64 FR 34778 (June 29, 1999). VerDate Mar<15>2010 16:24 Oct 18, 2010 Jkt 223001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\19OCN1.SGM 19OCN1

Agencies

[Federal Register Volume 75, Number 201 (Tuesday, October 19, 2010)]
[Notices]
[Pages 64246-64247]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-26268]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-351-828]


Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From 
Brazil: Correction to Notice of Antidumping Duty Order

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

DATES: Effective Date: October 19, 2010.

FOR FURTHER INFORMATION CONTACT: David Cordell or Ericka Ukrow, AD/CVD 
Operations, Office 7, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-
0408 or (202) 482-0405, respectively.

Correction

    On March 12, 2002, the Department published a notice of antidumping 
duty order for certain hot-rolled flat-rolled carbon-quality steel 
products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled 
Flat-Rolled Carbon-Quality Steel Products From Brazil, 67 FR 11093 
(March 12, 2002) (``Order''). The Order states incorrectly that 
``certain hot-rolled steel coil which meets the following chemical, 
physical and mechanical specifications is outside and/or specifically 
excluded from the scope of the order.''
    Hot-rolled steel coil which meets the following chemical, physical 
and mechanical specifications:

----------------------------------------------------------------------------------------------------------------
      C              Mn             P             S            Si            Cr            Cu            Ni
----------------------------------------------------------------------------------------------------------------
0.10-0.14%     0.90% Max.     0.025% Max.   0.005% Max.   0.30-0.50%    0.30-0.50%    0.20-0.40%    0.20% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile
  Strength = 70,000-88,000 psi.

    Hot-rolled steel coil which meets the following chemical, physical 
and mechanical specifications:

[[Page 64247]]



----------------------------------------------------------------------------------------------------------------
     C            Mn           P            S            Si           Cr          Cu          Ni          Mo
----------------------------------------------------------------------------------------------------------------
0.10-0.16%   0.70--0.90%  0.025% Max.  0.006% Max.  0.30-0.50%   0.30-0.50%   0.25% Max.  0.20% Max.  0.21% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile
  Strength = 105,000 psi Aim.


--------------------------------------------------------------------------------------------------------------------------------------------------------
      C            Mn             P             S            Si            Cr            Cu            Ni            Nb            Ca            Al
--------------------------------------------------------------------------------------------------------------------------------------------------------
0.15% Max.    1.40% Max.    0.025% Max.   0.010% Max.   0.50% Max.    1.00% Max.    0.50% Max.    0.20% Max.    0.005% Min.   Treated       0.01--0.70%
                                                                                                                                             Max.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for
  thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094.

    In addition, the terminology in the ``scope of the order'' section 
incorrectly uses the word ``agreement'' seven times instead of 
referring to the ``order'' itself. The first four instances incorrectly 
uses the phrase ``scope of this agreement.'' The final three 
incorrectly state (1) ``subject to this agreement'' (2) ``covered by 
this agreement'' and (3) ``under this agreement.''
    The Order is hereby corrected to read that certain hot-rolled steel 
coil which meets the following chemical, physical and mechanical 
specifications is excluded from the scope of the order.\1\
---------------------------------------------------------------------------

    \1\ See also the Antidumping Duty Order; Certain Hot-Rolled 
Flat-Rolled Carbon-Quality Steel Products From Japan, 64 FR 34778 
(June 29, 1999).
---------------------------------------------------------------------------

    Hot-rolled steel coil which meets the following chemical, physical 
and mechanical specifications:

----------------------------------------------------------------------------------------------------------------
      C              Mn             P             S            Si            Cr            Cu            Ni
----------------------------------------------------------------------------------------------------------------
0.10-0.14%     0.90% Max.     0.025% Max.   0.005% Max.   0.30-0.50%    0.50-0.70%    0.20-0.40%    0.20% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile
  Strength = 70,000-88,000 psi.

    Hot-rolled steel coil which meets the following chemical, physical 
and mechanical specifications:

----------------------------------------------------------------------------------------------------------------
     C            Mn           P            S            Si           Cr          Cu          Ni          Mo
----------------------------------------------------------------------------------------------------------------
0.10-0.16%   0.70--0.90%  0.025% Max.  0.006% Max.  0.30-0.50%   0.50-0.70%   0.25% Max.  0.20% Max.  0.21% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile
  Strength = 105,000 psi Aim.

    Hot-rolled steel coil which meets the following chemical, physical 
and mechanical specifications:

--------------------------------------------------------------------------------------------------------------------------------------------------------
      C            Mn             P             S            Si            Cr            Cu            Ni            Nb            Ca            Al
--------------------------------------------------------------------------------------------------------------------------------------------------------
0.15% Max.    1.40% Max.    0.025% Max.   0.010% Max.   0.50% Max.    1.00% Max.    0.50% Max.    0.20% Max.    0.005% Min.   Treated       0.01-0.07%
                                                                                                                                             Max.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for
  thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094.

    The Order is hereby corrected to refer to itself as an ``order'' in 
all cases where ``agreement'' was used in the ``scope of the order'' 
section of the Order.
    This notice is published in accordance with section 777(i) of the 
Tariff Act of 1930, as amended.

     Dated: October 12, 2010
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
[FR Doc. 2010-26268 Filed 10-18-10; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.