Visiting Committee on Advanced Technology, 60082-60083 [2010-24579]
Download as PDF
60082
Federal Register / Vol. 75, No. 188 / Wednesday, September 29, 2010 / Notices
Period to be
reviewed
Hyundai HYSCO .....................................................................................................................................................................
Pohang Iron & Steel Co., Ltd. (POSCO) ...............................................................................................................................
The People’s Republic of china: Laminated Woven Sacks C–570–917 ......................................................................................
Zibo Aifudi Plastic Packaging Co., Ltd. ..................................................................................................................................
The People’s Republic of China: Light-Walled Rectangular Pipe and Tubing C–570–915 .........................................................
Sun Group Co., Ltd. ...............................................................................................................................................................
erowe on DSK5CLS3C1PROD with NOTICES
Suspension Agreements
None.
During any administrative review
covering all or part of a period falling
between the first and second or third
and fourth anniversary of the
publication of an antidumping duty
order under 19 CFR 351.211 or a
3 If one of the above named companies does not
qualify for a separate rate, all other exporters of
frozen fish fillets from the Socialist Republic of
Vietnam who have not qualified for a separate rate
are deemed to be covered by this review as part of
the single Vietnam entity of which the named
exporters are a part.
4 In the initiation notice that published on August
31, 2010 (75 FR 53274), the Department
inadvertently included the exporter name: SRF
Limited, under case number A–583–837 for the
period of review: 7/1/09–6/30/10. The Department
did not receive a request to review SRF Limited for
case number A–583–837, therefore, the Department
retracts its initiation of an administrative review of
the antidumping order with respect to SRF Limited
for case number A–583–837 and for the period of
review 7/1/09–6/30/10.
5 If one of the above named companies does not
qualify for a separate rate, all other exporters of
certain steel nails from the People’s Republic of
China (‘‘PRC’’) who have not qualified for a separate
rate are deemed to be covered by this review as part
of the single PRC entity of which the named
exporters are a part.
6 If the above named company does not qualify
for a separate rate, all other exporters of floorstanding metal-top ironing tables from the PRC who
have not qualified for a separate rate are deemed to
be covered by this review as part of the single PRC
entity of which the named exporters are a part.
7 If the above named company does not qualify
for a separate rate, all other exporters of laminated
woven sacks from the PRC who have not qualified
for a separate rate are deemed to be covered by this
review as part of the single PRC entity of which the
named exporters are a part.
8 If the above named company does not qualify
for a separate rate, all other exporters of lightwalled rectangular pipe and tubing from the PRC
who have not qualified for a separate rate are
deemed to be covered by this review as part of the
single PRC entity of which the named exporters are
a part.
9 In the initiation notice that published on August
31, 2010 (75 FR 53274), the company FMC
Corporation was incorrectly initiated for case
number A–570–847 for the POR 7/1/09–6/30/10.
The Department retracts its initiation of an
administrative review for FMC Corporation and
initiates a review for the company listed above for
Persulfates from the PRC (A–570–847).
10 If one of the above named companies does not
qualify for a separate rate, all other exporters of
polyethylene retail carrier bags from the PRC who
have not qualified for a separate rate are deemed to
be covered by this review as part of the single PRC
entity of which the named exporters are a part.
VerDate Mar<15>2010
17:00 Sep 28, 2010
Jkt 220001
determination under 19 CFR
351.218(f)(4) to continue an order or
suspended investigation (after sunset
review), the Secretary, if requested by a
domestic interested party within 30
days of the date of publication of the
notice of initiation of the review, will
determine, consistent with FAG Italia v.
United States, 291 F.3d 806
(Fed Cir. 2002), as appropriate, whether
antidumping duties have been absorbed
by an exporter or producer subject to the
review if the subject merchandise is
sold in the United States through an
importer that is affiliated with such
exporter or producer. The request must
include the name(s) of the exporter or
producer for which the inquiry is
requested.
For the first administrative review of
any order, there will be no assessment
of antidumping or countervailing duties
on entries of subject merchandise
entered, or withdrawn from warehouse,
for consumption during the relevant
provisional-measures ‘‘gap’’ period, of
the order, if such a gap period is
applicable to the period of review.
Interested parties must submit
applications for disclosure under
administrative protective orders in
accordance with 19 CFR 351.305. On
January 22, 2008, the Department
published Antidumping and
Countervailing Duty Proceedings:
Documents Submission Procedures;
APO Procedures, 73 FR 3634 (January
22, 2008). Those procedures apply to
administrative reviews included in this
notice of initiation. Parties wishing to
participate in any of these
administrative reviews should ensure
that the meet the requirements of these
procedures (e.g., the filing of separate
letters of appearance as discussed at 19
CFR 351.103(d)).
These initiations and this notice are
in accordance with section 751(a) of the
Act (19 U.S.C. 1675(a)) and 19 CFR
351.221(c)(1)(i).
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
1/1/09–12/31/09
1/1/09–12/31/09
Dated: September 23, 2010.
Susan H. Kuhbach,
Acting Deputy Assistant Secretary for
Antidumping and Countervailing Duty
Operations.
[FR Doc. 2010–24462 Filed 9–28–10; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
Visiting Committee on Advanced
Technology
National Institute of Standards
and Technology, Department of
Commerce.
ACTION: Notice of Public Meeting.
AGENCY:
The Visiting Committee on
Advanced Technology (VCAT), National
Institute of Standards and Technology
(NIST), will meet Wednesday, October
13, 2010, from 8:30 a.m. to 5 p.m. and
Thursday, October 14, 2010, from 8:30
a.m. to 2:30 p.m. The Visiting
Committee on Advanced Technology is
composed of fifteen members appointed
by the Director of NIST who are eminent
in such fields as business, research, new
product development, engineering,
labor, education, management
consulting, environment, and
international relations.
DATES: The VCAT will meet on
Wednesday, October 13, 2010 from 8:30
a.m. to 5 p.m. and Thursday, October
14, 2010, from 8:30 a.m. to 2:30 p.m.
ADDRESSES: The meeting will be held in
the Portrait Room, Administration
Building, at NIST, Gaithersburg,
Maryland. The rooms for the VCAT
Breakout Groups will be announced at
the meeting. Please note admittance
instructions under the SUPPLEMENTARY
INFORMATION section of this notice.
FOR FURTHER INFORMATION CONTACT:
Stephanie Shaw, Visiting Committee on
Advanced Technology, National
Institute of Standards and Technology,
Gaithersburg, Maryland 20899–1060,
telephone number (301) 975–2667.
Ms. Shaw’s e-mail address is
stephanie.shaw@nist.gov.
SUMMARY:
E:\FR\FM\29SEN1.SGM
29SEN1
Federal Register / Vol. 75, No. 188 / Wednesday, September 29, 2010 / Notices
SUPPLEMENTARY INFORMATION:
Authority: 15 U.S.C. 278.
The purpose of this meeting is to
review and make recommendations
regarding general policy for the
Institute, its organization, its budget,
and its programs within the framework
of applicable national policies as set
forth by the President and the Congress.
The first day’s agenda will include an
update on NIST; presentations on NIST
proposed performance evaluation
framework and example
implementations for NIST calibration
services and Standard Reference
Materials; and a presentation on the
Administration’s Priorities on
Innovation by Mr. Aneesh Chopra, Chief
Technology Officer and Associate
Director for Technology, Office of
Science and Technology Policy. Three
concurrent breakout groups will be
convened in which NIST Division
Chiefs will provide information on
selected NIST measurement services to
the VCAT members. The first day will
conclude with the VCAT discussion on
NIST measurement services planning
and management. On the second day,
the meeting will focus on measurement
and standards needs in forensic sciences
including external perspectives from
guest speakers and an overview and
examples of forensic science activities at
NIST. Other topics include a discussion
on the initial outputs of the Blue Ribbon
Commission II Safety Management; an
update on external needs assessment
activities, and a wrap-up discussion,
recommendations, and plans for the
2010 VCAT Annual Report. The agenda
may change to accommodate Committee
business. The final agenda will be
posted on the NIST Web site at https://
www.nist.gov/director/vcat/agenda.htm.
Individuals and representatives of
organizations who would like to offer
comments and suggestions related to the
Committee’s affairs are invited to
request a place on the agenda. On
October 13, 2010, approximately onehalf hour will be reserved in the
afternoon for public comments, and
speaking times will be assigned on a
first-come, first-serve basis. The amount
of time per speaker will be determined
by the number of requests received, but
is likely to be about 3 minutes each. The
exact time for public comments will be
included in the final agenda that will be
posted on the NIST Web site at https://
www.nist.gov/director/vcat/agenda.htm.
Questions from the public will not be
considered during this period. Speakers
who wish to expand upon their oral
statements, those who had wished to
speak but could not be accommodated
on the agenda, and those who were
unable to attend in person are invited to
submit written statements to the VCAT,
National Institute of Standards and
Technology, 100 Bureau Drive, MS
1060, Gaithersburg, Maryland 20899, via
fax at 301–216–0529 or electronically by
e-mail to gail.ehrlich@nist.gov.
All visitors to the NIST site will have
to pre-register to be admitted. Please
submit your name, time of arrival,
e-mail address and phone number to
Stephanie Shaw no later than Friday,
October 8, 2010, and she will provide
you with instructions for admittance.
Ms. Shaw’s e-mail address is
60083
stephanie.shaw@nist.gov and her phone
number is (301) 975–2667.
Dated: September 27, 2010.
David Robinson,
Associate Director for Management
Resources.
[FR Doc. 2010–24579 Filed 9–28–10; 8:45 am]
BILLING CODE 3510–13–P
DEPARTMENT OF COMMERCE
Economic Development Administration
Notice of Petitions by Firms for
Determination of Eligibility To Apply
for Trade Adjustment Assistance
Economic Development
Administration, Department of
Commerce.
AGENCY:
Notice and Opportunity for
Public Comment.
ACTION:
Pursuant to Section 251 of the Trade
Act of 1974, as amended (19 U.S.C. 2341
et seq.), the Economic Development
Administration (EDA) has received
petitions for certification of eligibility to
apply for Trade Adjustment Assistance
from the firms listed below.
Accordingly, EDA has initiated
investigations to determine whether
increased imports into the United States
of articles like or directly competitive
with those produced by each of these
firms contributed importantly to the
total or partial separation of the firm’s
workers, or threat thereof, and to a
decrease in sales or production of each
petitioning firm.
LIST OF PETITIONS RECEIVED BY EDA FOR CERTIFICATION OF ELIGIBILITY TO APPLY FOR TRADE
ADJUSTMENT ASSISTANCE
[9/16/2010 through 9/23/2010]
Date
accepted for
investigation
Address
Custom Cable Crafters of
Missouri, Inc..
30 Shakertown Hall Lane, Perryville, MO 63775–
9796.
9/23/10
ECRM, Inc. ......................
554 Clark Road, Tewksbury, MA 01876 .................
9/17/10
Gunnebo Johnson Corporation.
Melron Corporation ..........
1240 N. Harvard Street, Tulsa, OK 74115 ..............
9/16/10
8110 Technology Drive, Schofield, WI 54476–4523
9/23/10
Mize and Co., Inc. ...........
erowe on DSK5CLS3C1PROD with NOTICES
Firm name
2020 N. Koch Industrial Avenue, Kingman, KS
67068–0516.
9/20/10
Niche Electronics Technologies, Inc..
201 Dykeman Road, Shippensburg, PA 17257 ......
9/20/10
VerDate Mar<15>2010
15:17 Sep 28, 2010
Jkt 220001
PO 00000
Frm 00019
Fmt 4703
Sfmt 4703
Products
The firm manufactures telecommunications assemblies in both copper and
fiber optics.
The firm designs, manufactures, markets
and services high-resolution imaging
systems.
The firm manufactures pulley blocks,
flywheels, and snatch blocks.
The firm manufacturers cast architectural
metal hardware for the window manufacturing industry.
The firm manufactures wire harnesses,
bulk wire, welding cable, electric terminals, trailer lights, jumper cables using
various wires, plastics, and rubber and
metal components.
The firm manufactures printed circuit assemblies.
E:\FR\FM\29SEN1.SGM
29SEN1
Agencies
[Federal Register Volume 75, Number 188 (Wednesday, September 29, 2010)]
[Notices]
[Pages 60082-60083]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-24579]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
Visiting Committee on Advanced Technology
AGENCY: National Institute of Standards and Technology, Department of
Commerce.
ACTION: Notice of Public Meeting.
-----------------------------------------------------------------------
SUMMARY: The Visiting Committee on Advanced Technology (VCAT), National
Institute of Standards and Technology (NIST), will meet Wednesday,
October 13, 2010, from 8:30 a.m. to 5 p.m. and Thursday, October 14,
2010, from 8:30 a.m. to 2:30 p.m. The Visiting Committee on Advanced
Technology is composed of fifteen members appointed by the Director of
NIST who are eminent in such fields as business, research, new product
development, engineering, labor, education, management consulting,
environment, and international relations.
DATES: The VCAT will meet on Wednesday, October 13, 2010 from 8:30 a.m.
to 5 p.m. and Thursday, October 14, 2010, from 8:30 a.m. to 2:30 p.m.
ADDRESSES: The meeting will be held in the Portrait Room,
Administration Building, at NIST, Gaithersburg, Maryland. The rooms for
the VCAT Breakout Groups will be announced at the meeting. Please note
admittance instructions under the SUPPLEMENTARY INFORMATION section of
this notice.
FOR FURTHER INFORMATION CONTACT: Stephanie Shaw, Visiting Committee on
Advanced Technology, National Institute of Standards and Technology,
Gaithersburg, Maryland 20899-1060, telephone number (301) 975-2667. Ms.
Shaw's e-mail address is stephanie.shaw@nist.gov.
[[Page 60083]]
SUPPLEMENTARY INFORMATION:
Authority: 15 U.S.C. 278.
The purpose of this meeting is to review and make recommendations
regarding general policy for the Institute, its organization, its
budget, and its programs within the framework of applicable national
policies as set forth by the President and the Congress. The first
day's agenda will include an update on NIST; presentations on NIST
proposed performance evaluation framework and example implementations
for NIST calibration services and Standard Reference Materials; and a
presentation on the Administration's Priorities on Innovation by Mr.
Aneesh Chopra, Chief Technology Officer and Associate Director for
Technology, Office of Science and Technology Policy. Three concurrent
breakout groups will be convened in which NIST Division Chiefs will
provide information on selected NIST measurement services to the VCAT
members. The first day will conclude with the VCAT discussion on NIST
measurement services planning and management. On the second day, the
meeting will focus on measurement and standards needs in forensic
sciences including external perspectives from guest speakers and an
overview and examples of forensic science activities at NIST. Other
topics include a discussion on the initial outputs of the Blue Ribbon
Commission II Safety Management; an update on external needs assessment
activities, and a wrap-up discussion, recommendations, and plans for
the 2010 VCAT Annual Report. The agenda may change to accommodate
Committee business. The final agenda will be posted on the NIST Web
site at https://www.nist.gov/director/vcat/agenda.htm.
Individuals and representatives of organizations who would like to
offer comments and suggestions related to the Committee's affairs are
invited to request a place on the agenda. On October 13, 2010,
approximately one-half hour will be reserved in the afternoon for
public comments, and speaking times will be assigned on a first-come,
first-serve basis. The amount of time per speaker will be determined by
the number of requests received, but is likely to be about 3 minutes
each. The exact time for public comments will be included in the final
agenda that will be posted on the NIST Web site at https://www.nist.gov/director/vcat/agenda.htm. Questions from the public will not be
considered during this period. Speakers who wish to expand upon their
oral statements, those who had wished to speak but could not be
accommodated on the agenda, and those who were unable to attend in
person are invited to submit written statements to the VCAT, National
Institute of Standards and Technology, 100 Bureau Drive, MS 1060,
Gaithersburg, Maryland 20899, via fax at 301-216-0529 or electronically
by e-mail to gail.ehrlich@nist.gov.
All visitors to the NIST site will have to pre-register to be
admitted. Please submit your name, time of arrival, e-mail address and
phone number to Stephanie Shaw no later than Friday, October 8, 2010,
and she will provide you with instructions for admittance. Ms. Shaw's
e-mail address is stephanie.shaw@nist.gov and her phone number is (301)
975-2667.
Dated: September 27, 2010.
David Robinson,
Associate Director for Management Resources.
[FR Doc. 2010-24579 Filed 9-28-10; 8:45 am]
BILLING CODE 3510-13-P