Welding, Cutting and Brazing Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 52037-52038 [2010-21055]

Download as PDF Federal Register / Vol. 75, No. 163 / Tuesday, August 24, 2010 / Notices wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1 Affected Public: Business or other forprofits; Not-for-profit institutions. Number of Respondents: 103. Frequency of Responses: Quarterly. Average Time per Response: 12 hours per quarter. Estimated Total Burden Hours: 4,944. Estimated Cost (Operation and Maintenance): $0. IV. Public Participation—Submission of Comments on this Notice and Internet Access to Comments and Submissions You may submit comments in response to this document as follows: (1) Electronically at https:// www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number for the ICR (Docket No. OSHA–2010–0021). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments. Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889– 5627). Comments and submissions are posted without change at https:// www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download through this Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the https:// www.regulations.gov Web site to submit comments and access the docket is available at the Web site’s ‘‘User Tips’’ link. Contact the OSHA Docket Office for information about materials not available through the Web site, and for assistance in using the Internet to locate docket submissions. VerDate Mar<15>2010 15:00 Aug 23, 2010 Jkt 220001 V. Authority and Signature David Michaels, PhD, MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 5–2007 (72 FR 31160). Signed at Washington, DC, on August 17, 2010. David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2010–21053 Filed 8–23–10; 8:45 am] BILLING CODE 4510–26–P DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2010–0037] Welding, Cutting and Brazing Standard; Extension of the Office of Management and Budget’s (OMB) Approval of Information Collection (Paperwork) Requirements Occupational Safety and Health Administration (OSHA), Labor. ACTION: Request for public comment. AGENCY: OSHA solicits comments concerning its proposal to extend the Office of Management and Budget’s (OMB) approval of the information collection requirements contained in the Welding, Cutting and Brazing Standard (29 CFR part 1910, subpart Q). The information collected is used by employers and workers whenever welding, cutting and brazing are performed. The purpose of the information is to ensure that employers evaluate hazards associated with welding and ensure that adequate measures are taken to make the process safe. DATES: Comments must be submitted (postmarked, sent, or received) by October 25, 2010. ADDRESSES: Electronically: You may submit comments and attachments electronically at https:// www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments. Facsimile: If your comments, including attachments, are not longer than 10 pages, you may fax them to the OSHA Docket Office at (202) 693–1648. Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit SUMMARY: PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 52037 three copies of your comments and attachments to the OSHA Docket Office, Docket No. OSHA–2010–0037, U.S. Department of Labor, Occupational Safety and Health Administration, Room N–2625, 200 Constitution Avenue, NW., Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor’s and Docket Office’s normal business hours, 8:15 a.m. to 4:45 p.m., e.t. Instructions: All submissions must include the Agency name and OSHA docket number for the Information Collection Request (ICR) (Docket No. OSHA–2010–0037). All comments, including any personal information you provide, are placed in the public docket without change, and may be made available online at https:// www.regulations.gov. For further information on submitting comments see the ‘‘Public Participation’’ heading in the section of this notice titled ‘‘Supplementary Information.’’ Docket: To read or download comments or other material in the docket, go to https://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the https:// www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR. FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, Room N–3609, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 693–2222. SUPPLEMENTARY INFORMATION: I. Background The Department of Labor, as part of its continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and E:\FR\FM\24AUN1.SGM 24AUN1 52038 Federal Register / Vol. 75, No. 163 / Tuesday, August 24, 2010 / Notices OSHA’s estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657). Section 1910.255(e) requires that a periodic inspection of resistance welding equipment be made by qualified maintenance personnel, and that a certification record be generated and maintained. The certification shall include the date of the inspection, the signature of the person who performed the inspection and the serial number, or other identifier, for the equipment inspected. The record shall be made available to an OSHA inspector upon request. The maintenance inspection ensures that welding equipment is in safe operating condition while the maintenance record provides evidence to workers and Agency compliance officers that employers performed the required inspections. wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1 II. Special Issues for Comment OSHA has a particular interest in comments on the following issues: • Whether the proposed information collection requirements are necessary for the proper performance of the Agency’s functions, including whether the information is useful; • The accuracy of OSHA’s estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used; • The quality, utility, and clarity of the information collected; and • Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques. III. Proposed Actions OSHA is requesting that OMB extend its approval of the information collection requirements contained in the Standard on Welding, Cutting and Brazing (29 CFR part 1910, subpart Q). The Agency is requesting to reduce its current burden hour estimate associated with this Standard from 5,994 hours to 5,935 hours for a total reduction of 59 VerDate Mar<15>2010 15:00 Aug 23, 2010 Jkt 220001 hours. The reduction is a result of a decrease in the estimated number of resistance welders. The Agency will summarize any comments submitted in response to this notice and will include this summary in the request to OMB. Type of Review: Extension of a currently approved collection. Title: Welding, Cutting and Brazing (29 CFR part 1910, subpart Q). OMB Number: 1218–0207. Affected Public: Business or other forprofits. Number of Respondents: 42,328. Frequency: On occasion; Semiannually. Average Time per Response: Varies from 1 minute (.02 hour) to maintain the inspection certification record to 7 minutes (.12 hour) to perform the inspection and to generate and maintain the inspection certification record. Estimated Total Burden Hours: 5,935. Estimated Cost (Operation and Maintenance): $0. IV. Public Participation—Submission of Comments on This Notice and Internet Access to Comments and Submissions You may submit comments in response to this document as follows: (1) Electronically at https:// www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number for the ICR (Docket No. OSHA–2010–0037). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments. Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889– 5627). Comments and submissions are posted without change at https:// www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in PO 00000 Frm 00064 Fmt 4703 Sfmt 4703 the https://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download through this website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the https:// www.regulations.gov website to submit comments and access the docket is available at the Web site’s ‘‘User Tips’’ link. Contact the OSHA Docket Office for information about materials not available through the Web site, and for assistance in using the Internet to locate docket submissions. V. Authority and Signature David Michaels, PhD, MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 5–2007 (67 FR 31160). Signed at Washington, DC, on August 16, 2010. David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2010–21055 Filed 8–23–10; 8:45 am] BILLING CODE 4510–26–P NATIONAL SCIENCE FOUNDATION Notice of Permit Application Received Under the Antarctic Conservation Act of 1978 National Science Foundation. Notice of permit applications received under the Antarctic Conservation Act. AGENCY: ACTION: Notice is hereby given that the National Science Foundation (NSF) has received a waste management permit application from Dr. Ralph Fedor for the establishment of a temporary amateur radio campsite for up to 13 people on Waterpipe Beach, Signey Island for approximately 18 days during the 2010–2011 austral summer season. The application is submitted to NSF pursuant to regulations issued under the Antarctic Conservation Act of 1978. DATES: Interested parties are invited to submit written data, comments, or views with respect to this permit application within September 23, 2010. Permit applications may be inspected by interested parties at the Permit Office, address below. ADDRESSES: Comments should be addressed to Permit Office, Room 755, Office of Polar Programs, National SUMMARY: E:\FR\FM\24AUN1.SGM 24AUN1

Agencies

[Federal Register Volume 75, Number 163 (Tuesday, August 24, 2010)]
[Notices]
[Pages 52037-52038]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-21055]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0037]


Welding, Cutting and Brazing Standard; Extension of the Office of 
Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comment.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits comments concerning its proposal to extend the 
Office of Management and Budget's (OMB) approval of the information 
collection requirements contained in the Welding, Cutting and Brazing 
Standard (29 CFR part 1910, subpart Q). The information collected is 
used by employers and workers whenever welding, cutting and brazing are 
performed. The purpose of the information is to ensure that employers 
evaluate hazards associated with welding and ensure that adequate 
measures are taken to make the process safe.

DATES: Comments must be submitted (postmarked, sent, or received) by 
October 25, 2010.

ADDRESSES:
    Electronically: You may submit comments and attachments 
electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit three copies of your comments 
and attachments to the OSHA Docket Office, Docket No. OSHA-2010-0037, 
U.S. Department of Labor, Occupational Safety and Health 
Administration, Room N-2625, 200 Constitution Avenue, NW., Washington, 
DC 20210. Deliveries (hand, express mail, messenger, and courier 
service) are accepted during the Department of Labor's and Docket 
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the Information Collection Request (ICR) (Docket No. 
OSHA-2010-0037). All comments, including any personal information you 
provide, are placed in the public docket without change, and may be 
made available online at https://www.regulations.gov. For further 
information on submitting comments see the ``Public Participation'' 
heading in the section of this notice titled ``Supplementary 
Information.''
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 
693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and

[[Page 52038]]

OSHA's estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    Section 1910.255(e) requires that a periodic inspection of 
resistance welding equipment be made by qualified maintenance 
personnel, and that a certification record be generated and maintained. 
The certification shall include the date of the inspection, the 
signature of the person who performed the inspection and the serial 
number, or other identifier, for the equipment inspected. The record 
shall be made available to an OSHA inspector upon request. The 
maintenance inspection ensures that welding equipment is in safe 
operating condition while the maintenance record provides evidence to 
workers and Agency compliance officers that employers performed the 
required inspections.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirements contained in the Standard on Welding, Cutting 
and Brazing (29 CFR part 1910, subpart Q). The Agency is requesting to 
reduce its current burden hour estimate associated with this Standard 
from 5,994 hours to 5,935 hours for a total reduction of 59 hours. The 
reduction is a result of a decrease in the estimated number of 
resistance welders. The Agency will summarize any comments submitted in 
response to this notice and will include this summary in the request to 
OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Welding, Cutting and Brazing (29 CFR part 1910, subpart Q).
    OMB Number: 1218-0207.
    Affected Public: Business or other for-profits.
    Number of Respondents: 42,328.
    Frequency: On occasion; Semiannually.
    Average Time per Response: Varies from 1 minute (.02 hour) to 
maintain the inspection certification record to 7 minutes (.12 hour) to 
perform the inspection and to generate and maintain the inspection 
certification record.
    Estimated Total Burden Hours: 5,935.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0037). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so the Agency can attach them 
to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the https://www.regulations.gov website to submit comments and 
access the docket is available at the Web site's ``User Tips'' link. 
Contact the OSHA Docket Office for information about materials not 
available through the Web site, and for assistance in using the 
Internet to locate docket submissions.

V. Authority and Signature

    David Michaels, PhD, MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 5-2007 
(67 FR 31160).

    Signed at Washington, DC, on August 16, 2010.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2010-21055 Filed 8-23-10; 8:45 am]
BILLING CODE 4510-26-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.