Rexam Closure Systems, Inc. a Subsidiary of Rexam PLC Including On-Site Leased Workers From Addeco Employment Services Including Workers Whose Unemployment Insurance (UI) Wages Are Paid Through Owens Illinois Manufacturing Hamlet, NC; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance, 28655 [2010-12249]

Download as PDF Federal Register / Vol. 75, No. 98 / Friday, May 21, 2010 / Notices At the request of the State Agency, the Department reviewed the certification for workers of the subject firm. The workers assemble Dodge Ram full-sized pickup trucks. New information shows that workers leased from Yazaki North America were employed on-site at the Fenton, Missouri location of Chrysler LLC, St. Louis North Assembly Plant. The Department has determined that these workers were sufficiently under the control of Chrysler LLC, St. Louis North Assembly Plant to be considered leased workers. Based on these findings, the Department is amending this certification to include workers leased from Yazaki North America working onsite at the Fenton, Missouri location of the subject firm. The intent of the Department’s certification is to include all workers employed at Chrysler LLC, St. Louis North Assembly Plant, Fenton, Missouri who were adversely affected by increased imports of Dodge Ram fullsized pickup trucks. The amended notice applicable to TA–W–63,052 is hereby issued as follows: All workers of Chrysler LLC, St. Louis North Assembly Plant, including on-site leased workers from HAAS TCM, Inc., Logistics Services, Inc., Robinson Solutions, Logistics Management Services, Corrigan Company, Murphy Company and Yazaki North America, Fenton, Missouri, who became totally or partially separated from employment on or after March 18, 2007, through April 14, 2010, are eligible to apply for adjustment assistance under Section 223 of the Trade Act of 1974, and are also eligible to apply for alternative trade adjustment assistance under Section 246 of the Trade Act of 1974. Signed at Washington, DC this 12th day of May 2010. Del Min Amy Chen, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. 2010–12252 Filed 5–20–10; 8:45 am] emcdonald on DSK2BSOYB1PROD with NOTICES VerDate Mar<15>2010 16:40 May 20, 2010 DEPARTMENT OF LABOR Chapter 2 of Title II of the Trade Act of 1974, as amended. Employment and Training Administration Signed in Washington, DC, this 11th day of May 2010. Michael W. Jaffe, Certifying Officer, Division of Trade Adjustment Assistance. [TA–W–72,912] Rexam Closure Systems, Inc. a Subsidiary of Rexam PLC Including On-Site Leased Workers From Addeco Employment Services Including Workers Whose Unemployment Insurance (UI) Wages Are Paid Through Owens Illinois Manufacturing Hamlet, NC; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (‘‘Act’’), 19 U.S.C. 2273, the Department of Labor issued a Certification of Eligibility to apply for Worker Adjustment Assistance on March 15, 2010, applicable to the workers of Rexam Closure Systems, Inc., a subsidiary of Rexam PLC, Hamlet, North Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR 21357). At the request of the State Agency, the Department reviewed the certification for workers of the subject firm. The workers were engaged in activities related to the production of plastic closures. New findings show that Rexam Closure Systems, Inc., a subsidiary of Rexam PLC purchased Owens Illinois Manufacturing. Some workers separated from employment at the subject firm had their wages reported under a separated unemployment insurance (UI) tax account under the name Owens Illinois Manufacturing. Accordingly, the Department is amending this certification to properly reflect this matter. The intent of the Department’s certification is to include all workers of Rexam Closure Systems, Inc. who were adversely affected as a secondary component supplier for a TAA certified firm. The amended notice applicable to TA–W–72,912 is hereby issued as follows: All workers of Rexam Closure Systems, Inc., a subsidiary of Rexam PLC, including on-site leased workers from Addeco Employment Services, and including workers whose UI wages are paid through Owens Illinois Manufacturing, Hamlet, North Carolina, who became totally or partially separated from employment on or after November 10, 2008, through March 15, 2012, and all workers in the group threatened with total or partial separation from employment on the date of certification through two years from the date of certification, are eligible to apply for adjustment assistance under BILLING CODE 4510–FN–P Jkt 220001 28655 PO 00000 Frm 00114 Fmt 4703 Sfmt 4703 [FR Doc. 2010–12249 Filed 5–20–10; 8:45 am] BILLING CODE 4510–FN–P DEPARTMENT OF LABOR Employment and Training Administration [TA–W–70,324] Delphi Packard Electrical/Electronic Architecture, a Subsidiary of Delphi Corporation, Including On-Site Leased Workers From Bartech and EDS, an HP Company; Warren, OH; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (‘‘Act’’), 19 U.S.C. 2273, the Department of Labor issued a Certification of Eligibility to Apply for Worker Adjustment Assistance on December 8, 2009, applicable to workers of Delphi Packard Electrical/Electronic Architecture, a subsidiary of Delphi Corporation, including on-site leased workers from Bartech, Warren, Ohio. The notice was published in the Federal Register on January 25, 2010 (75 FR 3930). The notice was amended on January 28, 2010 to include on-site leased workers from EDS an HP Company. The notice was published in the Federal Register on April 1, 2010 (75 FR 16513) At the request of the State Agency, the Department reviewed the certification for workers of the subject firm. The workers are engaged in the production of wiring and connector components. The review shows that on November 3, 2006, a certification of eligibility to apply for adjustment assistance was issued for all workers of Delphi Packard Electric, Warren, Ohio, separated from employment on or after July 26, 2005 through November 3, 2008. The notice was published in the Federal Register on November 22, 2006 (71 FR 67649). In order to avoid an overlap in worker group coverage, the Department is amending the May 19, 2008 impact date established for TA–W–70,324, to read November 4, 2008. The amended notice applicable to TA–W–70,324 is hereby issued as follows: All workers of Delphi Packard Electrical/ Electronic Architecture, a subsidiary of Delphi Corporation, including on-site leased E:\FR\FM\21MYN1.SGM 21MYN1

Agencies

[Federal Register Volume 75, Number 98 (Friday, May 21, 2010)]
[Notices]
[Page 28655]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-12249]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration

[TA-W-72,912]


Rexam Closure Systems, Inc. a Subsidiary of Rexam PLC Including 
On-Site Leased Workers From Addeco Employment Services Including 
Workers Whose Unemployment Insurance (UI) Wages Are Paid Through Owens 
Illinois Manufacturing Hamlet, NC; Amended Certification Regarding 
Eligibility To Apply for Worker Adjustment Assistance

    In accordance with Section 223 of the Trade Act of 1974, as amended 
(``Act''), 19 U.S.C. 2273, the Department of Labor issued a 
Certification of Eligibility to apply for Worker Adjustment Assistance 
on March 15, 2010, applicable to the workers of Rexam Closure Systems, 
Inc., a subsidiary of Rexam PLC, Hamlet, North Carolina. The notice was 
published in the Federal Register on April 23, 2010 (75 FR 21357).
    At the request of the State Agency, the Department reviewed the 
certification for workers of the subject firm. The workers were engaged 
in activities related to the production of plastic closures.
    New findings show that Rexam Closure Systems, Inc., a subsidiary of 
Rexam PLC purchased Owens Illinois Manufacturing. Some workers 
separated from employment at the subject firm had their wages reported 
under a separated unemployment insurance (UI) tax account under the 
name Owens Illinois Manufacturing.
    Accordingly, the Department is amending this certification to 
properly reflect this matter.
    The intent of the Department's certification is to include all 
workers of Rexam Closure Systems, Inc. who were adversely affected as a 
secondary component supplier for a TAA certified firm.
    The amended notice applicable to TA-W-72,912 is hereby issued as 
follows:

    All workers of Rexam Closure Systems, Inc., a subsidiary of 
Rexam PLC, including on-site leased workers from Addeco Employment 
Services, and including workers whose UI wages are paid through 
Owens Illinois Manufacturing, Hamlet, North Carolina, who became 
totally or partially separated from employment on or after November 
10, 2008, through March 15, 2012, and all workers in the group 
threatened with total or partial separation from employment on the 
date of certification through two years from the date of 
certification, are eligible to apply for adjustment assistance under 
Chapter 2 of Title II of the Trade Act of 1974, as amended.

    Signed in Washington, DC, this 11th day of May 2010.
Michael W. Jaffe,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. 2010-12249 Filed 5-20-10; 8:45 am]
BILLING CODE 4510-FN-P