Manufacturing Extension Partnership Advisory Board, 19941 [2010-8951]
Download as PDF
Federal Register / Vol. 75, No. 73 / Friday, April 16, 2010 / Notices
EAS action will be restricted to those
issues specifically listed in this notice
and any issues arising after publication
of this notice that require emergency
action under Section 305(c) of the
Magnuson-Stevens Fishery
Conservation and Management Act,
provided the public has been notified of
the intent to take final action to address
the emergency.
Special Accommodations
This meeting is physically accessible
to people with disabilities. Requests for
sign language interpretation or other
auxiliary aids should be directed to Ms.
Carolyn Porter at (503) 820–2280 at least
5 days prior to the meeting date.
Dated: April 13, 2010.
Tracey L. Thompson,
Acting Director, Office of Sustainable
Fisheries, National Marine Fisheries Service.
[FR Doc. 2010–8709 Filed 4–15–10; 8:45 am]
Special Accommodations
This meeting is physically accessible
to people with disabilities. Requests for
sign language interpretation or other
auxiliary aids should be directed to Tina
O’Hern at the Council (see ADDRESSES)
at least 5 working days prior to the
meeting.
BILLING CODE 3510–22–S
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XV87
Gulf of Mexico Fishery Management
Council; Public Meeting
AGENCY: National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice of public meeting.
The Gulf of Mexico Fishery
Management Council will convene a
public meeting of its Outreach and
Education Advisory Panel (AP).
DATES: The Outreach and Education AP
meeting is scheduled to begin at 1 p.m.
on Tuesday, May 4, 2010 and end no
later than 2 p.m. Thursday, May 6, 2010.
ADDRESSES: The meeting will be held at
the Gulf of Mexico Fishery Management
Council, 2203 North Lois Avenue, Suite
1100, Tampa, FL 33607; telephone:
(813) 348–1630.
Council address: Gulf of Mexico
Fishery Management Council, 2203 N.
Lois Avenue, Suite 1100, Tampa, FL
33607.
WReier-Aviles on DSKGBLS3C1PROD with NOTICES
SUMMARY:
FOR FURTHER INFORMATION CONTACT:
Charlene Ponce, Public Information
Officer; telephone: (813) 348–1630.
SUPPLEMENTARY INFORMATION: The
Outreach and Education Advisory panel
will convene to begin developing a fiveyear strategic plan. The panel will also
receive a report on the recent Marine
Resource Education Program Sessions
VerDate Nov<24>2008
15:07 Apr 15, 2010
Jkt 220001
held in York, Maine, as well as review
the Council’s new web site.
Although other non-emergency issues
not on the agenda may come before the
Outreach and Education Advisory Panel
for discussion, in accordance with the
Magnuson-Stevens Fishery
Conservation and Management Act
(Magnuson-Stevens Act), those issues
may not be the subject of formal action
during these meetings. Actions of the
Outreach and Education Advisory Panel
will be restricted to those issues
specifically identified in the agenda and
any issues arising after publication of
this notice that require emergency
action under Section 305(c) of the
Magnuson-Stevens Act, provided the
public has been notified of the Council’s
intent to take action to address the
emergency.
Copies of the agenda can be obtained
by calling (813) 348–1630.
Dated: April 13, 2010.
Tracey L. Thompson,
Acting Director, Office of Sustainable
Fisheries, National Marine Fisheries Service.
[FR Doc. 2010–8712 Filed 4–15–10; 8:45 am]
BILLING CODE 3510–22–S
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
Manufacturing Extension Partnership
Advisory Board
AGENCY: National Institute of Standards
and Technology, Commerce.
ACTION: Notice of open meeting.
SUMMARY: NIST announces that the
Manufacturing Extension Partnership
(MEP) Advisory Board, National
Institute of Standards and Technology
(NIST) will hold an open meeting on
Sunday, May 2, 2010 from 8:30 a.m. to
4:30 p.m.
DATES: The meeting will convene May 2,
2010 at 8:30 a.m. and will adjourn at
4:30 p.m. on May 2, 2010.
ADDRESSES: The meeting will be held at
Orlando World Center Marriott Resort &
Convention Center, 8701 World Center
Drive, Orlando, Florida 32821. Anyone
wishing to attend this meeting should
submit name, e-mail address and phone
number to Susan Hayduk
PO 00000
Frm 00006
Fmt 4703
Sfmt 9990
19941
(susan.hayduk@nist.gov or 301–975–
5614) no later than April 29, 2010.
FOR FURTHER INFORMATION CONTACT:
Karen Lellock, Manufacturing Extension
Partnership, National Institute of
Standards and Technology, 100 Bureau
Drive, Stop 4800, Gaithersburg,
Maryland 20899–4800, telephone
number (301) 975–4269.
SUPPLEMENTARY INFORMATION: This
meeting is being held in conjunction
with MEP’s National Conference in
Orlando, FL. The MEP Advisory Board
is composed of 10 members, appointed
by the Director of NIST, who were
selected for their expertise in the area of
industrial extension and their work on
behalf of smaller manufacturers. MEP is
a unique program consisting of centers
across the United States and Puerto
Rico, with partnerships at the State,
Federal, and local levels. The Board
works closely with MEP to provide
input and advice on MEP’s programs,
plans, and policies. For this meeting,
discussions will focus on an overview
on (1) the current manufacturing climate
and policy initiatives, (2) MEP center
operating structures and service
offerings, and (3) a discussion of a study
outlining alternative business models
for the MEP program. The agenda may
change to accommodate other Board
business.
Individuals and representatives of
organizations who would like to offer
comments and suggestions related to the
MEP Advisory Board’s business are
invited to request a place on the agenda.
Approximately fifteen minutes will be
reserved for public comments at the
beginning of the meeting. Speaking
times will be assigned on a first-come,
first-served basis. The amount of time
per speaker will be determined by the
number of requests received, but is
likely to be no more than 3 to 5 minutes
each. Questions from the public will not
be considered during this period.
Speakers who wish to expand upon
their oral statements, those who had
wished to speak but could not be
accommodated on the agenda, and those
who were unable to attend in person are
invited to submit written statements to
the MEP Advisory Board, National
Institute of Standards and Technology,
National Institute of Standards and
Technology, 100 Bureau Drive, Stop
4800, Gaithersburg, Maryland 20899–
4800, via fax at (301) 963–6556, or
electronically by e-mail to
karen.lellock@nist.gov.
Dated: April 13, 2010.
Marc G. Stanley,
Acting Deputy Director.
[FR Doc. 2010–8951 Filed 4–15–10; 8:45 am]
BILLING CODE 3510–13–P
E:\FR\FM\16APN1.SGM
16APN1
Agencies
[Federal Register Volume 75, Number 73 (Friday, April 16, 2010)]
[Notices]
[Page 19941]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-8951]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
Manufacturing Extension Partnership Advisory Board
AGENCY: National Institute of Standards and Technology, Commerce.
ACTION: Notice of open meeting.
-----------------------------------------------------------------------
SUMMARY: NIST announces that the Manufacturing Extension Partnership
(MEP) Advisory Board, National Institute of Standards and Technology
(NIST) will hold an open meeting on Sunday, May 2, 2010 from 8:30 a.m.
to 4:30 p.m.
DATES: The meeting will convene May 2, 2010 at 8:30 a.m. and will
adjourn at 4:30 p.m. on May 2, 2010.
ADDRESSES: The meeting will be held at Orlando World Center Marriott
Resort & Convention Center, 8701 World Center Drive, Orlando, Florida
32821. Anyone wishing to attend this meeting should submit name, e-mail
address and phone number to Susan Hayduk (susan.hayduk@nist.gov or 301-
975-5614) no later than April 29, 2010.
FOR FURTHER INFORMATION CONTACT: Karen Lellock, Manufacturing Extension
Partnership, National Institute of Standards and Technology, 100 Bureau
Drive, Stop 4800, Gaithersburg, Maryland 20899-4800, telephone number
(301) 975-4269.
SUPPLEMENTARY INFORMATION: This meeting is being held in conjunction
with MEP's National Conference in Orlando, FL. The MEP Advisory Board
is composed of 10 members, appointed by the Director of NIST, who were
selected for their expertise in the area of industrial extension and
their work on behalf of smaller manufacturers. MEP is a unique program
consisting of centers across the United States and Puerto Rico, with
partnerships at the State, Federal, and local levels. The Board works
closely with MEP to provide input and advice on MEP's programs, plans,
and policies. For this meeting, discussions will focus on an overview
on (1) the current manufacturing climate and policy initiatives, (2)
MEP center operating structures and service offerings, and (3) a
discussion of a study outlining alternative business models for the MEP
program. The agenda may change to accommodate other Board business.
Individuals and representatives of organizations who would like to
offer comments and suggestions related to the MEP Advisory Board's
business are invited to request a place on the agenda. Approximately
fifteen minutes will be reserved for public comments at the beginning
of the meeting. Speaking times will be assigned on a first-come, first-
served basis. The amount of time per speaker will be determined by the
number of requests received, but is likely to be no more than 3 to 5
minutes each. Questions from the public will not be considered during
this period. Speakers who wish to expand upon their oral statements,
those who had wished to speak but could not be accommodated on the
agenda, and those who were unable to attend in person are invited to
submit written statements to the MEP Advisory Board, National Institute
of Standards and Technology, National Institute of Standards and
Technology, 100 Bureau Drive, Stop 4800, Gaithersburg, Maryland 20899-
4800, via fax at (301) 963-6556, or electronically by e-mail to
karen.lellock@nist.gov.
Dated: April 13, 2010.
Marc G. Stanley,
Acting Deputy Director.
[FR Doc. 2010-8951 Filed 4-15-10; 8:45 am]
BILLING CODE 3510-13-P