Certain Steel Nails from the People's Republic of China: Notice of Preliminary Results of the New Shipper Review, 2483-2486 [2010-723]
Download as PDF
Federal Register / Vol. 75, No. 10 / Friday, January 15, 2010 / Notices
instrument and instructions should be
directed to William G. Jacobson, (562)
980–4035 or bill.jacobson@noaa.gov.
SUPPLEMENTARY INFORMATION:
[FR Doc. 2010–726 Filed 1–14–10; 8:45 am]
I. Abstract
BILLING CODE 3510–22–P
The information required by the
International Dolphin Conservation
Program Act, amendment to the Marine
Mammal Protection Act, is needed to:
(1) Document the Dolphin-safe status of
tuna import shipments; (2) verify that
import shipments of fish not harvested
by large scale, high seas driftnets; and
(3) verify that imported tuna not
harvested by an embargoed nation or
one that is otherwise prohibited from
exporting tuna to the United States.
Forms are submitted by importers and
processors.
II. Method of Collection
Respondents have a choice of either
electronic or paper forms. Methods of
submittal include e-mail of electronic
forms, and mail and facsimile
transmission of paper forms.
III. Data
OMB Control Number: 0648–0370.
Form Number: NOAA Form 370.
Type of Review: Regular submission.
Affected Public: Business or other forprofit organizations.
Estimated Number of Respondents:
440.
Estimated Time per Response: 20
minutes.
Estimated Total Annual Burden
Hours: 4,167.
Estimated Total Annual Cost to
Public: $4,050.
jlentini on DSKJ8SOYB1PROD with NOTICES
IV. Request for Comments
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden
(including hours and cost) of the
proposed collection of information; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
use of automated collection techniques
or other forms of information
technology.
Comments submitted in response to
this notice will be summarized and/or
included in the request for OMB
approval of this information collection;
they also will become a matter of public
record.
VerDate Nov<24>2008
Dated: January 12, 2010.
Gwellnar Banks,
Management Analyst, Office of the Chief
Information Officer.
17:34 Jan 14, 2010
Jkt 220001
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–909]
Certain Steel Nails from the People’s
Republic of China: Notice of
Preliminary Results of the New Shipper
Review
AGENCY: Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(‘‘Department’’) is conducting a new
shipper review (‘‘NSR’’) of the
antidumping duty order on certain steel
nails from the People’s Republic of
China (‘‘PRC’’). See Notice of
Antidumping Duty Order: Certain Steel
Nails From the People’s Republic of
China, 73 FR 44961 (August 1, 2008)
(‘‘Order’’). We preliminarily find that
Qingdao Denarius Manufacture Co., Ltd
(‘‘Qingdao Denarius’’) sold subject
merchandise at less than normal value
(‘‘NV’’) during the period of review
(‘‘POR’’), January 23, 2008, through
January 31, 2009. If these preliminary
results are adopted in our final results
of review, we will instruct U.S. Customs
and Border Protection (‘‘CBP’’) to assess
antidumping duties on entries of subject
merchandise during the POR for which
the importer–specific assessment rates
are above de minimis.
EFFECTIVE DATE: January 15, 2010.
FOR FURTHER INFORMATION CONTACT: Tim
Lord or Matthew Renkey, Office 9, AD/
CVD Operations, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington, DC 20230;
telephone (202) 482–7425 and (202)
482–2312, respectively.
SUPPLEMENTARY INFORMATION:
General Background
On February 25, 2009, pursuant to
section 751(a)(2)(B)(i) of the Tariff Act
of 1930, as amended (‘‘Act’’), and 19 CFR
351.214(c), the Department received a
NSR request from Qingdao Denarius.
Qingdao Denarius certified that it is a
producer and exporter of the subject
merchandise upon which the request
was based. On March 20, 2009, the
Department initiated the requested
antidumping duty NSR. See Certain
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
2483
Steel Nails from the People’s Republic
of China: Initiation of Antidumping
Duty New Shipper Review, 74 FR 11909
(March 20, 2009). On June 11, 2009, the
Department extended the deadline for
the preliminary results of this review by
120 days, to January 11, 2010. See
Certain Steel Nails from the People’s
Republic of China: Extension of Time
Limit for the Preliminary Results of the
New Shipper Review (‘‘Extension’’)1, 74
FR 27777 (June 11, 2009).
Between April 3, 2009, and August 4,
2009, Qingdao Denarius submitted
responses to the original sections A, C,
and D questionnaires and supplemental
sections A, C, and D questionnaires.
Surrogate Values
On October 29, 2009, the Department
sent interested parties a letter requesting
comments on surrogate country
selection and information pertaining to
valuing factors of production (‘‘FOP’’).
On November 24, 2009, Petitioner2
submitted surrogate value data. No other
party submitted surrogate country or
surrogate value data.
Verification
Pursuant to 19 CFR 351.307(b)(iv), we
conducted verification of the sales and
factors of production (‘‘FOP’’) for
Qingdao Denarius between November
9–12, 2009. See Memorandum to the
File from Tim Lord, Case Analyst
through Alex Villanueva, Program
Manager, Verification of the Sales and
Factors Response of Qingdao Denarius
Manufacture Co., Ltd in the
Antidumping New Shipper Review of
Certain Steel Nails from the People’s
Republic of China, dated, January 8,
2010 (‘‘Qingdao Denarius Verification
Report’’).
Scope of the Order
The merchandise covered by this
order includes certain steel nails having
a shaft length up to 12 inches. Certain
steel nails include, but are not limited
to, nails made of round wire and nails
that are cut. Certain steel nails may be
of one piece construction or constructed
of two or more pieces. Certain steel nails
may be produced from any type of steel,
and have a variety of finishes, heads,
shanks, point types, shaft lengths and
shaft diameters. Finishes include, but
are not limited to, coating in vinyl, zinc
(galvanized, whether by electroplating
1 Where a statutory deadline falls on a weekend,
federal holiday, or any other day when the
Department is closed, the Department will reach its
determination on the next business day, pursuant
to 19 CFR 351.303(b). In this instance, the
preliminary results will be due no later than
January 11, 2010.
2 Mid-Continent Nail Corporation.
E:\FR\FM\15JAN1.SGM
15JAN1
jlentini on DSKJ8SOYB1PROD with NOTICES
2484
Federal Register / Vol. 75, No. 10 / Friday, January 15, 2010 / Notices
or hot–dipping one or more times),
phosphate cement, and paint. Head
styles include, but are not limited to,
flat, projection, cupped, oval, brad,
headless, double, countersunk, and
sinker. Shank styles include, but are not
limited to, smooth, barbed, screw
threaded, ring shank and fluted shank
styles. Screw–threaded nails subject to
this proceeding are driven using direct
force and not by turning the fastener
using a tool that engages with the head.
Point styles include, but are not limited
to, diamond, blunt, needle, chisel and
no point. Finished nails may be sold in
bulk, or they may be collated into strips
or coils using materials such as plastic,
paper, or wire. Certain steel nails
subject to this proceeding are currently
classified under the Harmonized Tariff
Schedule of the United States
(‘‘HTSUS’’) subheadings 7317.00.55,
7317.00.65 and 7317.00.75.
Excluded from the scope of this
proceeding are roofing nails of all
lengths and diameter, whether collated
or in bulk, and whether or not
galvanized. Steel roofing nails are
specifically enumerated and identified
in ASTM Standard F 1667 (2005
revision) as Type I, Style 20 nails. Also
excluded from the scope of this
proceeding are corrugated nails. A
corrugated nail is made of a small strip
of corrugated steel with sharp points on
one side. Also excluded from the scope
of this proceeding are fasteners suitable
for use in powder–actuated hand tools,
not threaded and threaded, which are
currently classified under HTSUS
7317.00.20 and 7317.00.30. Also
excluded from the scope of this
proceeding are thumb tacks, which are
currently classified under HTSUS
7317.00.10.00. Also excluded from the
scope of this proceeding are certain
brads and finish nails that are equal to
or less than 0.0720 inches in shank
diameter, round or rectangular in cross
section, between 0.375 inches and 2.5
inches in length, and that are collated
with adhesive or polyester film tape
backed with a heat seal adhesive. Also
excluded from the scope of this
proceeding are fasteners having a case
hardness greater than or equal to 50
HRC, a carbon content greater than or
equal to 0.5 percent, a round head, a
secondary reduced–diameter raised
head section, a centered shank, and a
smooth symmetrical point, suitable for
use in gas–actuated hand tools.
While the HTSUS subheadings are
provided for convenience and customs
purposes, the written description of the
scope of this investigation is dispositive.
VerDate Nov<24>2008
17:34 Jan 14, 2010
Jkt 220001
Non–Market Economy Country Status
In every case conducted by the
Department involving the PRC, the PRC
has been treated as a non–market
economy (‘‘NME’’) country. See
Preliminary Determination of Sales at
Less Than Fair Value and Postponement
of Final Determination: Coated Free
Sheet Paper from the People’s Republic
of China, 72 FR 30758 (June 4, 2007).
See also Final Determination of Sales at
Less Than Fair Value: Coated Free Sheet
Paper from the People’s Republic of
China, 72 FR 60632, (October 25, 2007).
In accordance with section 771(18)(C)(i)
of the Act, any determination that a
foreign country is an NME country shall
remain in effect until revoked by the
administering authority. None of the
parties to this proceeding have
contested such treatment. Accordingly,
we calculated NV in accordance with
section 773(c) of the Act, which applies
to NME countries.
Separate Rate Determinations
A designation as a NME remains in
effect until it is revoked by the
Department. See section 771(18)(C) of
the Act. Accordingly, there is a
rebuttable presumption that all
companies within the PRC are subject to
government control and, thus, should be
assessed a single antidumping duty rate.
It is the Department’s standard policy to
assign all exporters of the merchandise
subject to review in NME countries a
single rate unless an exporter can
affirmatively demonstrate an absence of
government control, both in law (de
jure) and in fact (de facto), with respect
to exports. To establish whether a
company is sufficiently independent to
be entitled to a separate, company–
specific rate, the Department analyzes
each exporting entity in an NME
country under the test established in the
Final Determination of Sales at Less
than Fair Value: Sparklers from the
People’s Republic of China, 56 FR 20588
(May 6, 1991) (‘‘Sparklers’’), as amplified
by the Notice of Final Determination of
Sales at Less Than Fair Value: Silicon
Carbide from the People’s Republic of
China, 59 FR 22585 (May 2, 1994)
(‘‘Silicon Carbide’’).
A. Absence of De Jure Control
The Department considers the
following de jure criteria in determining
whether an individual company may be
granted a separate rate: (1) an absence of
restrictive stipulations associated with
an individual exporter’s business and
export licenses; (2) any legislative
enactments decentralizing control of
companies; and (3) other formal
measures by the government
PO 00000
Frm 00010
Fmt 4703
Sfmt 4703
decentralizing control of companies. See
Sparklers, 56 FR at 20589.
In this review, Qingdao Denarius
submitted a complete response to the
separate rates section of the
Department’s NME questionnaire. The
evidence submitted by Qingdao
Denarius includes government laws and
regulations on corporate ownership,
business licenses, and narrative
information regarding the company’s
operations and selection of
management. The evidence provided by
Qingdao Denarius supports a finding of
a de jure absence of government control
over its export activities. Thus, we
believe that the evidence on the record
supports a preliminary finding of an
absence of de jure government control
based on: (1) an absence of restrictive
stipulations associated with the
exporter’s business license; (2) the legal
authority on the record decentralizing
control over the respondent; and (3)
other formal measures by the
government decentralizing control of
companies.
B. Absence of De Facto Control
The absence of de facto government
control over exports is based on whether
the respondent: (1) sets its own export
prices independent of the government
and other exporters; (2) retains the
proceeds from its export sales and
makes independent decisions regarding
the disposition of profits or financing of
losses; (3) has the authority to negotiate
and sign contracts and other
agreements; and (4) has autonomy from
the government regarding the selection
of management. See Silicon Carbide, 59
FR at 22587; Sparklers, 56 FR at 20589;
see also Notice of Final Determination
of Sales at Less Than Fair Value:
Furfuryl Alcohol from the People’s
Republic of China, 60 FR 22544, 22545
(May 8, 1995).
In this review, Qingdao Denarius
submitted evidence indicating an
absence of de facto government control
over their export activities. Specifically,
this evidence indicates that: (1) the
company sets its own export prices
independent of the government and
without the approval of a government
authority; (2) the company retains the
proceeds from its sales and makes
independent decisions regarding the
disposition of profits or financing of
losses; (3) the company has a general
manager, branch manager or division
manager with the authority to negotiate
and bind the company in an agreement;
(4) the general manager is selected by
the board of directors or company
employees, and the general manager
appoints the deputy managers and the
manager of each department; and (5)
E:\FR\FM\15JAN1.SGM
15JAN1
Federal Register / Vol. 75, No. 10 / Friday, January 15, 2010 / Notices
there is no restriction on any of the
company’s use of export revenues.
Therefore, the Department preliminarily
finds that Qingdao Denarius has
established that it qualifies for a
separate rate under the criteria
established by Silicon Carbide and
Sparklers.
jlentini on DSKJ8SOYB1PROD with NOTICES
New Shipper Review Bona Fide
Analysis
Consistent with the Department’s
practice, we investigated the bona fide
nature of the sale made by Qingdao
Denarius for this NSR. In evaluating
whether a single sale in a NSR is
commercially reasonable, and therefore
bona fide, the Department considers,
inter alia, such factors as: (1) timing of
the sale; (2) price and quantity; (3) the
expenses arising from the transaction;
(4) whether the goods were sold at a
profit; and (5) whether the transaction
was made on an arms–length basis. See
Tianjin Tiancheng Pharmaceutical Co.
v. the United States, 366 F. Supp. 2d
R46, 1250 (CIT 2005). Accordingly, the
Department considers a number of
factors in its bona fide analysis, ‘‘all of
which may be specific to the
commercial realities surrounding an
alleged sale of subject merchandise.’’
See Hebei New Donghua Amino Acid
Co. v. the United States, 374 F. Supp.
2d 1333, 1342 (CIT 2005). In examining
Qingdao Denarius’ sale in relation to
these factors, the Department observed
no evidence that would indicate that
this sale was not bona fide. Therefore,
we preliminarily find that the new
shipper sale by Qingdao Denarius was
made on a bona fide basis.
Based on our investigation into the
bona fide nature of the sale, the
questionnaire responses submitted by
Qingdao Denarius, and our verification
of Qingdao Denarius, as well the
company’s eligibility for separate rates
(see Separate Rates Determination
section above), we preliminarily
determine that Qingdao Denarius has
met the requirements to qualify as a new
shipper during this POR. Therefore, for
the purposes of these preliminary
results of review, we are treating
Qingdao Denarius’ sale of subject
merchandise to the United States as an
appropriate transaction for this NSR.
Surrogate Country
When the Department is investigating
imports from an NME country, section
773(c)(1) of the Act directs it to base
normal value (‘‘NV’’), in most
circumstances, on the NME producer’s
FOPs, valued in a surrogate market
economy country or countries
considered to be appropriate by the
Department. In accordance with section
VerDate Nov<24>2008
17:34 Jan 14, 2010
Jkt 220001
773(c)(4) of the Act, in valuing the
FOPs, the Department shall utilize, to
the extent possible, the prices or costs
of FOPs in one or more market economy
countries that are: (1) at a level of
economic development comparable to
that of the NME country; and (2)
significant producers of comparable
merchandise.
The Department determined that
India, Philippines, Indonesia, Colombia,
Thailand, and Peru are countries
comparable to the PRC in terms of
economic development.3 Once it has
identified economically comparable
countries, the Department’s practice is
to select an appropriate surrogate
country from the list based on the
availability and reliability of data from
the countries. See Department Policy
Bulletin No. 04.1: Non–Market Economy
Surrogate Country Selection Process
(March 1, 2004). In this case, we have
found that India is a significant
producer of comparable merchandise. In
the less–than-fair value investigation,
we determined that India is comparable
to the PRC in terms of economic
development and has surrogate value
data that is available and reliable. See
Certain Steel Nails from the People’s
Republic of China: Final Determination
of Sales at Less Than Fair Value and
Partial Affirmative Determination of
Critical Circumstances, 73 FR 33977
(June 16, 2008). In this proceeding, we
received comments regarding surrogate
country selection only from the
Petitioner, which supports the selection
of India. Since no information has been
provided in this review that would
warrant a change in the Department’s
selection of India from the less–than-fair
value investigation, we continue to find
that India is the most appropriate
surrogate country because it is at a
similar level of economic development
pursuant to section 773(c)(4) of the Act,
is a significant producer of comparable
merchandise, and has reliable, publicly
available data representing a broad–
market average.
In accordance with 19 CFR
351.301(c)(3)(ii), for the final results in
an antidumping administrative review,
interested parties may submit publicly
available information to value FOPs
within 20 days after the date of
publication of these preliminary results.
3 See Memorandum from Kelly Parkhill, Acting
Director of Office of Policy, to Alex Villanueva,
Program Manager, China/NME Group, Office 9:
Request for a List of Surrogate Countries for the
New Shipper Review of the Antidumping Duty
Order on Certain Steel Nails (‘‘Steel Nails’’) from the
People’s Republic of China (‘‘PRC’’) (October 28,
2009).
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
2485
U.S. Price
For Qingdao Denarius’ sale to the
United States, we used the export price
(‘‘EP’’) methodology, pursuant to section
772(a) of the Act, because the first sale
to an unaffiliated purchaser was made
prior to importation, and CEP was not
otherwise warranted by the facts on the
record. We calculated EP based on the
price to unaffiliated purchasers in the
United States.
In accordance with section 772(c) of
the Act, as appropriate, we deducted
from the starting price to unaffiliated
purchasers foreign inland freight and
brokerage and handling. We have
reviewed each of these services and
expenses reported by Qingdao Denarius
and find that they were provided by an
NME vendor or paid for using PRC
currency. Thus, we based the deduction
of these movement charges on surrogate
values. See Memorandum to the File
through Alex Villanueva, Program
Manager, Office 9 from Tim Lord, Case
Analyst, Office 9: Antidumping Duty
New Shipper Review of Certain Steel
Nails from the People’s Republic of
China: Surrogate Values for the
Preliminary Results, dated January 8,
2010 (‘‘Surrogate Values Memo’’) for
details regarding the surrogate values for
movement expenses.
Normal Value
1. Methodology
Section 773(c)(1)(B) of the Act
provides that the Department shall
determine the NVusing a FOP
methodology if the merchandise is
exported from an NME country and the
information does not permit the
calculation of NV using home–market
prices, third–country prices, or
constructed value under section 773(a)
of the Act. The Department bases NV on
the FOPs because the presence of
government controls on various aspects
of NMEs renders price comparisons and
the calculation of production costs
invalid under the Department’s normal
methodologies.
2. Factor Valuations
In accordance with section 773(c) of
the Act, we calculated NV based on
FOPs reported by Qingdao Denarius
during the POR. To calculate NV, we
multiplied the reported per–unit factor–
consumption rates by publicly available
Indian surrogate values. In selecting the
surrogate values, we considered the
quality, specificity, and
contemporaneity of the data. As
appropriate, we adjusted input prices by
including freight costs to make them
delivered prices. Specifically, we added
to Indian import surrogate values a
E:\FR\FM\15JAN1.SGM
15JAN1
2486
Federal Register / Vol. 75, No. 10 / Friday, January 15, 2010 / Notices
surrogate freight cost using the shorter
of the reported distance from the
domestic supplier to the factory of
production or the distance from the
nearest seaport to the factory of
production where appropriate. This
adjustment is in accordance with the
Court of Appeals for the Federal
Circuit’s decision in Sigma Corp. v.
United States, 117 F. 3d 1401, 1407–
1408 (Fed. Cir. 1997). Where we did not
use Indian Import Statistics, we
calculated freight based on the reported
distance from the supplier to the
factory.
Indian surrogate values denominated
in foreign currencies were converted to
USD using the applicable average
exchange rate based on exchange rate
data from the Department’s website. For
further details regarding the surrogate
values used for these preliminary
results, see the Surrogate Values Memo.
Preliminary Results of the Review
As a result of our review, we
preliminarily find that the following
margins exist for the period January 23,
2008, through January 31, 2009:
CERTAIN STEEL NAILS FROM PRC
Manufacturer/Exporter
Weighted–Average
Margin (Percent)
Qingdao Denarius .........
38.13
Disclosure
The Department will disclose to
parties of this proceeding the
calculations performed in reaching the
preliminary results within five days of
the date of publication of this notice in
accordance with 19 CFR 351.224(b).
jlentini on DSKJ8SOYB1PROD with NOTICES
Comments
In accordance with 19 CFR
351.301(c)(3)(ii), for the final results of
this administrative review, interested
parties may submit publicly available
information to value FOPs within 20
days after the date of publication of
these preliminary results. Interested
parties must provide the Department
with supporting documentation for the
publicly available information to value
each FOP. Additionally, in accordance
with 19 CFR 351.301(c)(1), for the final
results of this NSR, interested parties
may submit factual information to rebut,
clarify, or correct factual information
submitted by an interested party less
than ten days before, on, or after, the
applicable deadline for submission of
such factual information. However, the
Department notes that 19 CFR
351.301(c)(1) permits new information
only insofar as it rebuts, clarifies, or
VerDate Nov<24>2008
17:34 Jan 14, 2010
Jkt 220001
corrects information recently placed on
the record.4
Interested parties may submit case
briefs and/or written comments no later
than 30 days after the date of
publication of these preliminary results
of this NSR. See 19 CFR 351.309(c)(ii).
Rebuttal briefs and rebuttals to written
comments, limited to issues raised in
such briefs or comments, may be filed
no later than 5 days after the deadline
for submitting the case briefs. See 19
CFR 351.309(d). The Department
requests that interested parties provide
an executive summary of each argument
contained within the case briefs and
rebuttal briefs.
Any interested party may request a
hearing within 30 days of publication of
these preliminary results. See 19 CFR
351.310(c). Requests should contain the
following information: (1) The party’s
name, address, and telephone number;
(2) the number of participants; and (3)
a list of the issues to be discussed. Oral
presentations will be limited to issues
raised in the briefs. If we receive a
request for a hearing, we plan to hold
the hearing seven days after the
deadline for submission of the rebuttal
briefs at the U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW, Washington, DC 20230.
The Department intends to issue the
final results of this NSR, which will
include the results of its analysis raised
in any such comments, within 90 days
of publication of these preliminary
results, pursuant to section
751(a)(2)(B)(iv) of the Act.
Assessment Rates
Upon completion of the final results,
pursuant to 19 CFR 351.212(b), the
Department will determine, and CBP
shall assess, antidumping duties on all
appropriate entries on a weighted–
average basis. The Department intends
to issue assessment instructions to CBP
15 days after the date of publication of
the final results of review. If these
preliminary results are adopted in our
final results of review, the Department
shall determine, and CBP shall assess,
antidumping duties on all appropriate
entries. Pursuant to 19 CFR
351.212(b)(1), we will calculate
importer–specific (or customer) per–
unit duty assessment rates. We will
instruct CBP to assess antidumping
duties on all appropriate entries covered
by this review if any importer–specific
assessment rate calculated in the final
results of this NSR is above de minimis.
Cash–Deposit Requirements
The following cash deposit
requirements, when imposed, will be
effective upon publication of the final
results of this NSR for all shipments of
subject merchandise from Qingdao
Denarius entered, or withdrawn from
warehouse, for consumption on or after
the publication date, as provided for by
section 751(a)(2)(C) of the Act: (1) for
subject merchandise produced and
exported by Qingdao Denarius, the cash
deposit rate will be the rate that is
established in the final results of this
NSR; (2) for subject merchandise
exported by Qingdao Denarius but not
manufactured by Qingdao Denarius, the
cash deposit rate will continue to be the
PRC–wide rate (i.e., 118.04 percent);
and (3) for subject merchandise
manufactured by Qingdao Denarius, but
exported by any other party, the cash
deposit rate will be the rate applicable
to the exporter. If the cash deposit rate
calculated in the final results is zero or
de minimis, no cash deposit will be
required for those entries of subject
merchandise both produced and
exported by Qingdao Denarius. These
cash deposit requirements, when
imposed, shall remain in effect until
further notice.
Notification to Importers
This notice serves as a preliminary
reminder to importers of their
responsibility under 19 CFR
351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping duties prior to liquidation
of the relevant entries during this POR.
Failure to comply with this requirement
could result in the Secretary’s
presumption that reimbursement of
antidumping duties occurred and the
subsequent assessment of double
antidumping duties.
We are issuing and publishing this
determination in accordance with
sections 751(a)(2)(B) and 777(i) of the
Act, and 19 CFR 351.214(h) and
351.221(b)(4).
Dated: January 8, 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import
Administration.
[FR Doc. 2010–723 Filed 1–14–10; 8:45 am]
BILLING CODE 3510–DS–S
4 See Glycine from the People’s Republic of
China: Final Results of Antidumping Duty
Administrative Review and Final Rescission, in Part
72 FR 58809 (October 17, 2007), and accompanying
Issues and Decision Memorandum at Comment 2.
PO 00000
Frm 00012
Fmt 4703
Sfmt 9990
E:\FR\FM\15JAN1.SGM
15JAN1
Agencies
[Federal Register Volume 75, Number 10 (Friday, January 15, 2010)]
[Notices]
[Pages 2483-2486]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2010-723]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-909]
Certain Steel Nails from the People's Republic of China: Notice
of Preliminary Results of the New Shipper Review
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
Summary: The Department of Commerce (``Department'') is conducting a
new shipper review (``NSR'') of the antidumping duty order on certain
steel nails from the People's Republic of China (``PRC''). See Notice
of Antidumping Duty Order: Certain Steel Nails From the People's
Republic of China, 73 FR 44961 (August 1, 2008) (``Order''). We
preliminarily find that Qingdao Denarius Manufacture Co., Ltd
(``Qingdao Denarius'') sold subject merchandise at less than normal
value (``NV'') during the period of review (``POR''), January 23, 2008,
through January 31, 2009. If these preliminary results are adopted in
our final results of review, we will instruct U.S. Customs and Border
Protection (``CBP'') to assess antidumping duties on entries of subject
merchandise during the POR for which the importer-specific assessment
rates are above de minimis.
EFFECTIVE DATE: January 15, 2010.
FOR FURTHER INFORMATION CONTACT: Tim Lord or Matthew Renkey, Office 9,
AD/CVD Operations, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC 20230; telephone (202) 482-
7425 and (202) 482-2312, respectively.
SUPPLEMENTARY INFORMATION:
General Background
On February 25, 2009, pursuant to section 751(a)(2)(B)(i) of the
Tariff Act of 1930, as amended (``Act''), and 19 CFR 351.214(c), the
Department received a NSR request from Qingdao Denarius. Qingdao
Denarius certified that it is a producer and exporter of the subject
merchandise upon which the request was based. On March 20, 2009, the
Department initiated the requested antidumping duty NSR. See Certain
Steel Nails from the People's Republic of China: Initiation of
Antidumping Duty New Shipper Review, 74 FR 11909 (March 20, 2009). On
June 11, 2009, the Department extended the deadline for the preliminary
results of this review by 120 days, to January 11, 2010. See Certain
Steel Nails from the People's Republic of China: Extension of Time
Limit for the Preliminary Results of the New Shipper Review
(``Extension'')\1\, 74 FR 27777 (June 11, 2009).
---------------------------------------------------------------------------
\1\ Where a statutory deadline falls on a weekend, federal
holiday, or any other day when the Department is closed, the
Department will reach its determination on the next business day,
pursuant to 19 CFR 351.303(b). In this instance, the preliminary
results will be due no later than January 11, 2010.
---------------------------------------------------------------------------
Between April 3, 2009, and August 4, 2009, Qingdao Denarius
submitted responses to the original sections A, C, and D questionnaires
and supplemental sections A, C, and D questionnaires.
Surrogate Values
On October 29, 2009, the Department sent interested parties a
letter requesting comments on surrogate country selection and
information pertaining to valuing factors of production (``FOP''). On
November 24, 2009, Petitioner\2\ submitted surrogate value data. No
other party submitted surrogate country or surrogate value data.
---------------------------------------------------------------------------
\2\ Mid-Continent Nail Corporation.
---------------------------------------------------------------------------
Verification
Pursuant to 19 CFR 351.307(b)(iv), we conducted verification of the
sales and factors of production (``FOP'') for Qingdao Denarius between
November 9-12, 2009. See Memorandum to the File from Tim Lord, Case
Analyst through Alex Villanueva, Program Manager, Verification of the
Sales and Factors Response of Qingdao Denarius Manufacture Co., Ltd in
the Antidumping New Shipper Review of Certain Steel Nails from the
People's Republic of China, dated, January 8, 2010 (``Qingdao Denarius
Verification Report'').
Scope of the Order
The merchandise covered by this order includes certain steel nails
having a shaft length up to 12 inches. Certain steel nails include, but
are not limited to, nails made of round wire and nails that are cut.
Certain steel nails may be of one piece construction or constructed of
two or more pieces. Certain steel nails may be produced from any type
of steel, and have a variety of finishes, heads, shanks, point types,
shaft lengths and shaft diameters. Finishes include, but are not
limited to, coating in vinyl, zinc (galvanized, whether by
electroplating
[[Page 2484]]
or hot-dipping one or more times), phosphate cement, and paint. Head
styles include, but are not limited to, flat, projection, cupped, oval,
brad, headless, double, countersunk, and sinker. Shank styles include,
but are not limited to, smooth, barbed, screw threaded, ring shank and
fluted shank styles. Screw-threaded nails subject to this proceeding
are driven using direct force and not by turning the fastener using a
tool that engages with the head. Point styles include, but are not
limited to, diamond, blunt, needle, chisel and no point. Finished nails
may be sold in bulk, or they may be collated into strips or coils using
materials such as plastic, paper, or wire. Certain steel nails subject
to this proceeding are currently classified under the Harmonized Tariff
Schedule of the United States (``HTSUS'') subheadings 7317.00.55,
7317.00.65 and 7317.00.75.
Excluded from the scope of this proceeding are roofing nails of all
lengths and diameter, whether collated or in bulk, and whether or not
galvanized. Steel roofing nails are specifically enumerated and
identified in ASTM Standard F 1667 (2005 revision) as Type I, Style 20
nails. Also excluded from the scope of this proceeding are corrugated
nails. A corrugated nail is made of a small strip of corrugated steel
with sharp points on one side. Also excluded from the scope of this
proceeding are fasteners suitable for use in powder-actuated hand
tools, not threaded and threaded, which are currently classified under
HTSUS 7317.00.20 and 7317.00.30. Also excluded from the scope of this
proceeding are thumb tacks, which are currently classified under HTSUS
7317.00.10.00. Also excluded from the scope of this proceeding are
certain brads and finish nails that are equal to or less than 0.0720
inches in shank diameter, round or rectangular in cross section,
between 0.375 inches and 2.5 inches in length, and that are collated
with adhesive or polyester film tape backed with a heat seal adhesive.
Also excluded from the scope of this proceeding are fasteners having a
case hardness greater than or equal to 50 HRC, a carbon content greater
than or equal to 0.5 percent, a round head, a secondary reduced-
diameter raised head section, a centered shank, and a smooth
symmetrical point, suitable for use in gas-actuated hand tools.
While the HTSUS subheadings are provided for convenience and
customs purposes, the written description of the scope of this
investigation is dispositive.
Non-Market Economy Country Status
In every case conducted by the Department involving the PRC, the
PRC has been treated as a non-market economy (``NME'') country. See
Preliminary Determination of Sales at Less Than Fair Value and
Postponement of Final Determination: Coated Free Sheet Paper from the
People's Republic of China, 72 FR 30758 (June 4, 2007). See also Final
Determination of Sales at Less Than Fair Value: Coated Free Sheet Paper
from the People's Republic of China, 72 FR 60632, (October 25, 2007).
In accordance with section 771(18)(C)(i) of the Act, any determination
that a foreign country is an NME country shall remain in effect until
revoked by the administering authority. None of the parties to this
proceeding have contested such treatment. Accordingly, we calculated NV
in accordance with section 773(c) of the Act, which applies to NME
countries.
Separate Rate Determinations
A designation as a NME remains in effect until it is revoked by the
Department. See section 771(18)(C) of the Act. Accordingly, there is a
rebuttable presumption that all companies within the PRC are subject to
government control and, thus, should be assessed a single antidumping
duty rate. It is the Department's standard policy to assign all
exporters of the merchandise subject to review in NME countries a
single rate unless an exporter can affirmatively demonstrate an absence
of government control, both in law (de jure) and in fact (de facto),
with respect to exports. To establish whether a company is sufficiently
independent to be entitled to a separate, company-specific rate, the
Department analyzes each exporting entity in an NME country under the
test established in the Final Determination of Sales at Less than Fair
Value: Sparklers from the People's Republic of China, 56 FR 20588 (May
6, 1991) (``Sparklers''), as amplified by the Notice of Final
Determination of Sales at Less Than Fair Value: Silicon Carbide from
the People's Republic of China, 59 FR 22585 (May 2, 1994) (``Silicon
Carbide'').
A. Absence of De Jure Control
The Department considers the following de jure criteria in
determining whether an individual company may be granted a separate
rate: (1) an absence of restrictive stipulations associated with an
individual exporter's business and export licenses; (2) any legislative
enactments decentralizing control of companies; and (3) other formal
measures by the government decentralizing control of companies. See
Sparklers, 56 FR at 20589.
In this review, Qingdao Denarius submitted a complete response to
the separate rates section of the Department's NME questionnaire. The
evidence submitted by Qingdao Denarius includes government laws and
regulations on corporate ownership, business licenses, and narrative
information regarding the company's operations and selection of
management. The evidence provided by Qingdao Denarius supports a
finding of a de jure absence of government control over its export
activities. Thus, we believe that the evidence on the record supports a
preliminary finding of an absence of de jure government control based
on: (1) an absence of restrictive stipulations associated with the
exporter's business license; (2) the legal authority on the record
decentralizing control over the respondent; and (3) other formal
measures by the government decentralizing control of companies.
B. Absence of De Facto Control
The absence of de facto government control over exports is based on
whether the respondent: (1) sets its own export prices independent of
the government and other exporters; (2) retains the proceeds from its
export sales and makes independent decisions regarding the disposition
of profits or financing of losses; (3) has the authority to negotiate
and sign contracts and other agreements; and (4) has autonomy from the
government regarding the selection of management. See Silicon Carbide,
59 FR at 22587; Sparklers, 56 FR at 20589; see also Notice of Final
Determination of Sales at Less Than Fair Value: Furfuryl Alcohol from
the People's Republic of China, 60 FR 22544, 22545 (May 8, 1995).
In this review, Qingdao Denarius submitted evidence indicating an
absence of de facto government control over their export activities.
Specifically, this evidence indicates that: (1) the company sets its
own export prices independent of the government and without the
approval of a government authority; (2) the company retains the
proceeds from its sales and makes independent decisions regarding the
disposition of profits or financing of losses; (3) the company has a
general manager, branch manager or division manager with the authority
to negotiate and bind the company in an agreement; (4) the general
manager is selected by the board of directors or company employees, and
the general manager appoints the deputy managers and the manager of
each department; and (5)
[[Page 2485]]
there is no restriction on any of the company's use of export revenues.
Therefore, the Department preliminarily finds that Qingdao Denarius has
established that it qualifies for a separate rate under the criteria
established by Silicon Carbide and Sparklers.
New Shipper Review Bona Fide Analysis
Consistent with the Department's practice, we investigated the bona
fide nature of the sale made by Qingdao Denarius for this NSR. In
evaluating whether a single sale in a NSR is commercially reasonable,
and therefore bona fide, the Department considers, inter alia, such
factors as: (1) timing of the sale; (2) price and quantity; (3) the
expenses arising from the transaction; (4) whether the goods were sold
at a profit; and (5) whether the transaction was made on an arms-length
basis. See Tianjin Tiancheng Pharmaceutical Co. v. the United States,
366 F. Supp. 2d R46, 1250 (CIT 2005). Accordingly, the Department
considers a number of factors in its bona fide analysis, ``all of which
may be specific to the commercial realities surrounding an alleged sale
of subject merchandise.'' See Hebei New Donghua Amino Acid Co. v. the
United States, 374 F. Supp. 2d 1333, 1342 (CIT 2005). In examining
Qingdao Denarius' sale in relation to these factors, the Department
observed no evidence that would indicate that this sale was not bona
fide. Therefore, we preliminarily find that the new shipper sale by
Qingdao Denarius was made on a bona fide basis.
Based on our investigation into the bona fide nature of the sale,
the questionnaire responses submitted by Qingdao Denarius, and our
verification of Qingdao Denarius, as well the company's eligibility for
separate rates (see Separate Rates Determination section above), we
preliminarily determine that Qingdao Denarius has met the requirements
to qualify as a new shipper during this POR. Therefore, for the
purposes of these preliminary results of review, we are treating
Qingdao Denarius' sale of subject merchandise to the United States as
an appropriate transaction for this NSR.
Surrogate Country
When the Department is investigating imports from an NME country,
section 773(c)(1) of the Act directs it to base normal value (``NV''),
in most circumstances, on the NME producer's FOPs, valued in a
surrogate market economy country or countries considered to be
appropriate by the Department. In accordance with section 773(c)(4) of
the Act, in valuing the FOPs, the Department shall utilize, to the
extent possible, the prices or costs of FOPs in one or more market
economy countries that are: (1) at a level of economic development
comparable to that of the NME country; and (2) significant producers of
comparable merchandise.
The Department determined that India, Philippines, Indonesia,
Colombia, Thailand, and Peru are countries comparable to the PRC in
terms of economic development.\3\ Once it has identified economically
comparable countries, the Department's practice is to select an
appropriate surrogate country from the list based on the availability
and reliability of data from the countries. See Department Policy
Bulletin No. 04.1: Non-Market Economy Surrogate Country Selection
Process (March 1, 2004). In this case, we have found that India is a
significant producer of comparable merchandise. In the less-than-fair
value investigation, we determined that India is comparable to the PRC
in terms of economic development and has surrogate value data that is
available and reliable. See Certain Steel Nails from the People's
Republic of China: Final Determination of Sales at Less Than Fair Value
and Partial Affirmative Determination of Critical Circumstances, 73 FR
33977 (June 16, 2008). In this proceeding, we received comments
regarding surrogate country selection only from the Petitioner, which
supports the selection of India. Since no information has been provided
in this review that would warrant a change in the Department's
selection of India from the less-than-fair value investigation, we
continue to find that India is the most appropriate surrogate country
because it is at a similar level of economic development pursuant to
section 773(c)(4) of the Act, is a significant producer of comparable
merchandise, and has reliable, publicly available data representing a
broad-market average.
---------------------------------------------------------------------------
\3\ See Memorandum from Kelly Parkhill, Acting Director of
Office of Policy, to Alex Villanueva, Program Manager, China/NME
Group, Office 9: Request for a List of Surrogate Countries for the
New Shipper Review of the Antidumping Duty Order on Certain Steel
Nails (``Steel Nails'') from the People's Republic of China
(``PRC'') (October 28, 2009).
---------------------------------------------------------------------------
In accordance with 19 CFR 351.301(c)(3)(ii), for the final results
in an antidumping administrative review, interested parties may submit
publicly available information to value FOPs within 20 days after the
date of publication of these preliminary results.
U.S. Price
For Qingdao Denarius' sale to the United States, we used the export
price (``EP'') methodology, pursuant to section 772(a) of the Act,
because the first sale to an unaffiliated purchaser was made prior to
importation, and CEP was not otherwise warranted by the facts on the
record. We calculated EP based on the price to unaffiliated purchasers
in the United States.
In accordance with section 772(c) of the Act, as appropriate, we
deducted from the starting price to unaffiliated purchasers foreign
inland freight and brokerage and handling. We have reviewed each of
these services and expenses reported by Qingdao Denarius and find that
they were provided by an NME vendor or paid for using PRC currency.
Thus, we based the deduction of these movement charges on surrogate
values. See Memorandum to the File through Alex Villanueva, Program
Manager, Office 9 from Tim Lord, Case Analyst, Office 9: Antidumping
Duty New Shipper Review of Certain Steel Nails from the People's
Republic of China: Surrogate Values for the Preliminary Results, dated
January 8, 2010 (``Surrogate Values Memo'') for details regarding the
surrogate values for movement expenses.
Normal Value
1. Methodology
Section 773(c)(1)(B) of the Act provides that the Department shall
determine the NVusing a FOP methodology if the merchandise is exported
from an NME country and the information does not permit the calculation
of NV using home-market prices, third-country prices, or constructed
value under section 773(a) of the Act. The Department bases NV on the
FOPs because the presence of government controls on various aspects of
NMEs renders price comparisons and the calculation of production costs
invalid under the Department's normal methodologies.
2. Factor Valuations
In accordance with section 773(c) of the Act, we calculated NV
based on FOPs reported by Qingdao Denarius during the POR. To calculate
NV, we multiplied the reported per-unit factor-consumption rates by
publicly available Indian surrogate values. In selecting the surrogate
values, we considered the quality, specificity, and contemporaneity of
the data. As appropriate, we adjusted input prices by including freight
costs to make them delivered prices. Specifically, we added to Indian
import surrogate values a
[[Page 2486]]
surrogate freight cost using the shorter of the reported distance from
the domestic supplier to the factory of production or the distance from
the nearest seaport to the factory of production where appropriate.
This adjustment is in accordance with the Court of Appeals for the
Federal Circuit's decision in Sigma Corp. v. United States, 117 F. 3d
1401, 1407-1408 (Fed. Cir. 1997). Where we did not use Indian Import
Statistics, we calculated freight based on the reported distance from
the supplier to the factory.
Indian surrogate values denominated in foreign currencies were
converted to USD using the applicable average exchange rate based on
exchange rate data from the Department's website. For further details
regarding the surrogate values used for these preliminary results, see
the Surrogate Values Memo.
Preliminary Results of the Review
As a result of our review, we preliminarily find that the following
margins exist for the period January 23, 2008, through January 31,
2009:
Certain Steel Nails from PRC
------------------------------------------------------------------------
Weighted-Average
Manufacturer/Exporter Margin (Percent)
------------------------------------------------------------------------
Qingdao Denarius.................................... 38.13
------------------------------------------------------------------------
Disclosure
The Department will disclose to parties of this proceeding the
calculations performed in reaching the preliminary results within five
days of the date of publication of this notice in accordance with 19
CFR 351.224(b).
Comments
In accordance with 19 CFR 351.301(c)(3)(ii), for the final results
of this administrative review, interested parties may submit publicly
available information to value FOPs within 20 days after the date of
publication of these preliminary results. Interested parties must
provide the Department with supporting documentation for the publicly
available information to value each FOP. Additionally, in accordance
with 19 CFR 351.301(c)(1), for the final results of this NSR,
interested parties may submit factual information to rebut, clarify, or
correct factual information submitted by an interested party less than
ten days before, on, or after, the applicable deadline for submission
of such factual information. However, the Department notes that 19 CFR
351.301(c)(1) permits new information only insofar as it rebuts,
clarifies, or corrects information recently placed on the record.\4\
---------------------------------------------------------------------------
\4\ See Glycine from the People's Republic of China: Final
Results of Antidumping Duty Administrative Review and Final
Rescission, in Part 72 FR 58809 (October 17, 2007), and accompanying
Issues and Decision Memorandum at Comment 2.
---------------------------------------------------------------------------
Interested parties may submit case briefs and/or written comments
no later than 30 days after the date of publication of these
preliminary results of this NSR. See 19 CFR 351.309(c)(ii). Rebuttal
briefs and rebuttals to written comments, limited to issues raised in
such briefs or comments, may be filed no later than 5 days after the
deadline for submitting the case briefs. See 19 CFR 351.309(d). The
Department requests that interested parties provide an executive
summary of each argument contained within the case briefs and rebuttal
briefs.
Any interested party may request a hearing within 30 days of
publication of these preliminary results. See 19 CFR 351.310(c).
Requests should contain the following information: (1) The party's
name, address, and telephone number; (2) the number of participants;
and (3) a list of the issues to be discussed. Oral presentations will
be limited to issues raised in the briefs. If we receive a request for
a hearing, we plan to hold the hearing seven days after the deadline
for submission of the rebuttal briefs at the U.S. Department of
Commerce, 14th Street and Constitution Avenue, NW, Washington, DC
20230.
The Department intends to issue the final results of this NSR,
which will include the results of its analysis raised in any such
comments, within 90 days of publication of these preliminary results,
pursuant to section 751(a)(2)(B)(iv) of the Act.
Assessment Rates
Upon completion of the final results, pursuant to 19 CFR
351.212(b), the Department will determine, and CBP shall assess,
antidumping duties on all appropriate entries on a weighted-average
basis. The Department intends to issue assessment instructions to CBP
15 days after the date of publication of the final results of review.
If these preliminary results are adopted in our final results of
review, the Department shall determine, and CBP shall assess,
antidumping duties on all appropriate entries. Pursuant to 19 CFR
351.212(b)(1), we will calculate importer-specific (or customer) per-
unit duty assessment rates. We will instruct CBP to assess antidumping
duties on all appropriate entries covered by this review if any
importer-specific assessment rate calculated in the final results of
this NSR is above de minimis.
Cash-Deposit Requirements
The following cash deposit requirements, when imposed, will be
effective upon publication of the final results of this NSR for all
shipments of subject merchandise from Qingdao Denarius entered, or
withdrawn from warehouse, for consumption on or after the publication
date, as provided for by section 751(a)(2)(C) of the Act: (1) for
subject merchandise produced and exported by Qingdao Denarius, the cash
deposit rate will be the rate that is established in the final results
of this NSR; (2) for subject merchandise exported by Qingdao Denarius
but not manufactured by Qingdao Denarius, the cash deposit rate will
continue to be the PRC-wide rate (i.e., 118.04 percent); and (3) for
subject merchandise manufactured by Qingdao Denarius, but exported by
any other party, the cash deposit rate will be the rate applicable to
the exporter. If the cash deposit rate calculated in the final results
is zero or de minimis, no cash deposit will be required for those
entries of subject merchandise both produced and exported by Qingdao
Denarius. These cash deposit requirements, when imposed, shall remain
in effect until further notice.
Notification to Importers
This notice serves as a preliminary reminder to importers of their
responsibility under 19 CFR 351.402(f)(2) to file a certificate
regarding the reimbursement of antidumping duties prior to liquidation
of the relevant entries during this POR. Failure to comply with this
requirement could result in the Secretary's presumption that
reimbursement of antidumping duties occurred and the subsequent
assessment of double antidumping duties.
We are issuing and publishing this determination in accordance with
sections 751(a)(2)(B) and 777(i) of the Act, and 19 CFR 351.214(h) and
351.221(b)(4).
Dated: January 8, 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
[FR Doc. 2010-723 Filed 1-14-10; 8:45 am]
BILLING CODE 3510-DS-S