NCM Chassis Systems, LLC, a Subsidiary of Metaldyne Company, LLC, Including On-Site Leased Workers From Securitas, Fuch's Lubricants, Inc., Alpha Placement Services and Ferguson Enterprises, Inc., New Castle, IN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 55265 [E9-25794]
Download as PDF
<![CDATA[
Federal Register / Vol. 74, No. 206 / Tuesday, October 27, 2009 / Notices
Securitas, Fuch’s Lubricants, Inc., Alpha
Placement Services and Ferguson
Enterprises, Inc., New Castle, Indiana who
became totally or partially separated from
employment on or after October 1, 2007,
through October 23, 2010 are eligible to
apply for adjustment assistance under
Section 223 of the Trade Act of 1974, and are
also eligible to apply for alternative trade
adjustment assistance under Section 246 of
the Trade Act of 1974.
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–64,158]
pwalker on DSK8KYBLC1PROD with NOTICES
NCM Chassis Systems, LLC, a
Subsidiary of Metaldyne Company,
LLC, Including On-Site Leased
Workers From Securitas, Fuch’s
Lubricants, Inc., Alpha Placement
Services and Ferguson Enterprises,
Inc., New Castle, IN; Amended
Certification Regarding Eligibility To
Apply for Worker Adjustment
Assistance and Alternative Trade
Adjustment Assistance
Signed at Washington, DC, this 16th day of
October 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–25794 Filed 10–26–09; 8:45 am]
BILLING CODE 4510–FN–P
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility to Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance on October 23, 2008
applicable to workers of NCM Chassis
Systems, LLC, a subsidiary of Metaldyne
Company, LLC, New Castle, Indiana.
The notice was published in the Federal
Register on November 10, 2008 (73 FR
66676). The notice was amended on
August 26, 2009 to include leased
workers from Securitas and Fuch’s
Lubricants, Inc., who were employed
on-site at the New Castle, Indiana site.
The notice was published in the Federal
Register on September 22, 2009 (74 FR
48298).
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of chassis components for the
automobile industry.
New information shows that workers
leased from Alpha Placement Services
and Ferguson Enterprises, Inc. were
employed on-site at the New Castle,
Indiana location of NCM Chassis
Systems, LLC. The Department has
determined that these workers were
sufficiently under the control of the
subject firm to be considered leased
workers.
Based on these findings, the
Department is amending this
certification to include workers leased
from Alpha Placement Services and
Ferguson Enterprises, Inc., working onsite at the New Castle, Indiana site
location of NCM Chassis Systems, LLC.
The amended notice applicable to
TA–W–64,158 is hereby issued as
follows:
All workers of NCM Chassis Systems, LLC,
a subsidiary of Metaldyne Company, LLC,
including on-site leased workers from
VerDate Nov<24>2008
16:45 Oct 26, 2009
Jkt 220001
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–63,939]
Hewlett Packard, Inkjet and Web
Solutions Division, Including On-Site
Leased Workers From CDI, Manpower,
Securitas Security Services USA, Volt,
Cable Consultants, D/B/A Black Box
Network Services, Managed Business
Solutions, 888 Consulting Group, Inc.,
D/B/A Tac Worldwide, Finesse
Personnel, Techlink Systems, Inc.,
Lionbridge and Cornerstone/Trinite,
Corvallis, OR; Amended Certification
Regarding Eligibility To Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility to Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance on September 19, 2008,
applicable to workers of Hewlett
Packard, Inkjet and Web Solutions
Division, including on-site leased
workers from CDI, Manpower, Securitas
Security Services USA and Volt,
Corvallis, Oregon. The notice was
published in the Federal Register on
October 3, 2008 (73 FR 57682). The
certification was amended on December
4, 2008, February 20, 2009 and
September 18, 2009 to include on-site
leased workers from Cable Consultants,
d/b/a Black Box Network Services,
Managed Business Solutions, 888
Consulting Group, Inc., d/b/a TAC
Worldwide, Finesse Personnel, Techlink
Systems, Inc. and Lionbridge. The
notices were published in the Federal
Register on December 15, 2008 (73 FR
PO 00000
Frm 00085
Fmt 4703
Sfmt 4703
55265
76058), March 4, 2009 (74 FR 9431–
9432) and October 5, 2009 (74 FR
51178).
At the request of State Agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of inkjet supplies, particularly in jet
printer cartridge heads.
New information shows that workers
leased from Cornerstone/Trinite were
employed on-site at the Corvallis,
Oregon location of Hewlett Packard,
Inkjet and Web Solutions Division. The
Department has determined that these
workers were sufficiently under the
control of the subject firm to be
considered leased workers.
Based on these findings, the
Department is amending this
certification to include leased workers
from Cornerstone/Trinite working onsite at the Inkjet and Web Solutions
Division, Corvallis, Oregon location of
the subject firm.
The amended notice applicable to
TA–W–63,939 is hereby issued as
follows:
All workers of Hewlett Packard, Inkjet and
Web Solutions Division, including on-site
leased workers from CDI, Manpower,
Securitas Security Services USA, Volt,
Managed Business Solutions, 888 Consulting
Group, Inc., d/b/a TAC Worldwide, Finesse
Personnel, Techlink Systems, Inc.,
Lionbridge and Cornerstone/Trinite,
Corvallis, Oregon, engaged in the production
of inkjet supplies, who became totally or
partially separated from employment on or
after August 26, 2007, through September 19,
2010, are eligible to apply for adjustment
assistance under Section 223 of the Trade Act
of 1974, and are also eligible to apply for
alternative trade adjustment assistance under
Section 246 of the Trade Act of 1974.
Signed at Washington, DC, this 14th day of
October 2009.
Richard Church,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–25793 Filed 10–26–09; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–71,004]
Radisys Corporation, Including On-Site
Leased Workers From Employment
Trends, DB Professionals, Inc., and
Prosource Network; Hillsboro, OR;
Amended Certification Regarding
Eligibility To Apply for Worker
Adjustment Assistance
In accordance with Section 223 of the
Trade Act of 1974, as amended (‘‘Act’’),
E:\FR\FM\27OCN1.SGM
27OCN1
]]>Agencies
[Federal Register Volume 74, Number 206 (Tuesday, October 27, 2009)]
[Notices]
[Page 55265]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-25794]
[[Page 55265]]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
[TA-W-64,158]
NCM Chassis Systems, LLC, a Subsidiary of Metaldyne Company, LLC,
Including On-Site Leased Workers From Securitas, Fuch's Lubricants,
Inc., Alpha Placement Services and Ferguson Enterprises, Inc., New
Castle, IN; Amended Certification Regarding Eligibility To Apply for
Worker Adjustment Assistance and Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C.
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as
amended, the Department of Labor issued a Certification of Eligibility
to Apply for Worker Adjustment Assistance and Alternative Trade
Adjustment Assistance on October 23, 2008 applicable to workers of NCM
Chassis Systems, LLC, a subsidiary of Metaldyne Company, LLC, New
Castle, Indiana. The notice was published in the Federal Register on
November 10, 2008 (73 FR 66676). The notice was amended on August 26,
2009 to include leased workers from Securitas and Fuch's Lubricants,
Inc., who were employed on-site at the New Castle, Indiana site. The
notice was published in the Federal Register on September 22, 2009 (74
FR 48298).
At the request of the State agency, the Department reviewed the
certification for workers of the subject firm. The workers are engaged
in the production of chassis components for the automobile industry.
New information shows that workers leased from Alpha Placement
Services and Ferguson Enterprises, Inc. were employed on-site at the
New Castle, Indiana location of NCM Chassis Systems, LLC. The
Department has determined that these workers were sufficiently under
the control of the subject firm to be considered leased workers.
Based on these findings, the Department is amending this
certification to include workers leased from Alpha Placement Services
and Ferguson Enterprises, Inc., working on-site at the New Castle,
Indiana site location of NCM Chassis Systems, LLC.
The amended notice applicable to TA-W-64,158 is hereby issued as
follows:
All workers of NCM Chassis Systems, LLC, a subsidiary of
Metaldyne Company, LLC, including on-site leased workers from
Securitas, Fuch's Lubricants, Inc., Alpha Placement Services and
Ferguson Enterprises, Inc., New Castle, Indiana who became totally
or partially separated from employment on or after October 1, 2007,
through October 23, 2010 are eligible to apply for adjustment
assistance under Section 223 of the Trade Act of 1974, and are also
eligible to apply for alternative trade adjustment assistance under
Section 246 of the Trade Act of 1974.
Signed at Washington, DC, this 16th day of October 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E9-25794 Filed 10-26-09; 8:45 am]
BILLING CODE 4510-FN-P
