Application(s) for Duty-Free Entry of Scientific Instruments, 44350 [E9-20824]

Download as PDF 44350 Federal Register / Vol. 74, No. 166 / Friday, August 28, 2009 / Notices establishments, first quarter payroll, annual payroll, and mid-March employment summarized by industry and employment size class for the United States, the District of Columbia, Puerto Rico, counties, and countyequivalents. No other annual or more frequent series of industry statistics provides comparable detail, particularly for small geographic areas. Affected Public: Business or other forprofit; Not-for-profit institutions; Farms; State, local or Tribal governments. Frequency: Annually. Respondent’s Obligation: Mandatory. Legal Authority: Title 13 U.S.C., Sections 182, 195, 224, and 225. OMB Desk Officer: Brian HarrisKojetin, (202) 395–7314. Copies of the above information collection proposal can be obtained by calling or writing Diana Hynek, Departmental Paperwork Clearance Officer, (202) 482–0266, Department of Commerce, Room 7845, 14th and Constitution Avenue, NW., Washington, DC 20230 (or via the Internet at dhynek@doc.gov). Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to Brian Harris-Kojetin, OMB Desk Officer either by fax (202–395– 7245) or e-mail (bharrisk@omb.eop.gov). Dated: August 24, 2009. Glenna Mickelson, Management Analyst, Office of the Chief Information Officer. [FR Doc. E9–20696 Filed 8–27–09; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE International Trade Administration hsrobinson on DSK69SOYB1PROD with NOTICES Application(s) for Duty–Free Entry of Scientific Instruments Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before September 17, 2009. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, D.C. 20230. Applications may be examined between 8:30 a.m. and VerDate Nov<24>2008 00:07 Aug 28, 2009 Jkt 217001 5 p.m. at the U.S. Department of Commerce in Room 3720. Docket Number: 09–045. Applicant: Air Force Research Laboratory, Wright– Patterson AFB, 2230 10th St., Area ‘‘B’’, Building 655, Room 76, Wright– Patterson AFB, OH 45433. Instrument: Tilting Goniometer Stages, with Resistive Encoders. Manufacturer: Attocube Systems AG, Germany. Intended Use: This instrument will be used to study structural aerospace materials. Specifically, it will be used to characterize and measure the micromechanical properties of structural aerospace metals. The instrument must be able to move linear position less than 5 nm wide and to move objects to distances over 5 nm. It must also have millidegree resolution and a range of tilt of at least 5 degrees. Justification for Duty–Free Entry: There are no instruments of the same general category being manufactured within the United States. Application accepted by Commissioner of Customs: July 27, 2009. Docket Number: 09–046. Applicant: National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, Colorado 80401. Instrument: Sidewinder Upgrade (ion column) Accessory for Electron Microscope. Manufacturer: FEI Company, the Netherlands. Intended Use: This instrument will be used to study the chemistry, crystallography and structural morphology of a variety of materials used in the development of photovoltaic devices. Justification for Duty–Free Entry: There are no instruments of the same general category being manufactured within the United States. Application accepted by Commissioner of Customs: August 3, 2009. Dated: August 24, 2009. Christopher Cassel, Acting Director, IA Subsidies Enforcement Office. [FR Doc. E9–20823 Filed 8–27–04; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE International Trade Administration Application(s) for Duty–Free Entry of Scientific Instruments Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before September 17, 2009. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, D.C. 20230. Applications may be examined between 8:30 a.m. and 5 p.m. at the U.S. Department of Commerce in Room 3720. Docket Number: 09–047. Applicant: Washington State University, P.O. Box 641020, Pullman, WA 99164. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument will be used to study bulk amorphous metal alloys, nano–particle ceramics, nano–particle metals, polymer matrices and ceramic matrices. The instrument will be used to measure the thickness of deposited coatings at 1.0 nm resolution. Justification for Duty–Free Entry: No instruments of same general category are manufactured in the United States. Application accepted by Commissioner of Customs: July 31, 2009. Dated: August 24, 2009. Christopher Cassel, Acting Director, IA Subsidies Enforcement Office. [FR Doc. E9–20824 Filed 8–27–09; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE International Trade Administration [Docket No. 0908031214–91214–01] Call for Applications for the International Buyer Program Calendar Year 2011 AGENCY: International Trade Administration, Department of Commerce. ACTION: Notice and Call for Applications. SUMMARY: This notice sets forth objectives, procedures and application review criteria associated with support for domestic trade shows by the International Buyer Program (IBP) of the U.S. Department of Commerce (DOC). This announcement covers selection for International Buyer Program participation for calendar year 2011 (January 1, 2011 through December 31, 2011). The purpose of the IBP program is to bring international buyers together with U.S. firms by promoting leading U.S. trade shows in industries with high export potential. E:\FR\FM\28AUN1.SGM 28AUN1

Agencies

[Federal Register Volume 74, Number 166 (Friday, August 28, 2009)]
[Notices]
[Page 44350]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-20824]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Application(s) for Duty-Free Entry of Scientific Instruments

Pursuant to Section 6(c) of the Educational, Scientific and Cultural 
Materials Importation Act of 1966 (Pub. L. 89-651, as amended by Pub. 
L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments on the 
question of whether instruments of equivalent scientific value, for the 
purposes for which the instruments shown below are intended to be used, 
are being manufactured in the United States.
Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations 
and be postmarked on or before September 17, 2009. Address written 
comments to Statutory Import Programs Staff, Room 3720, U.S. Department 
of Commerce, Washington, D.C. 20230. Applications may be examined 
between 8:30 a.m. and 5 p.m. at the U.S. Department of Commerce in Room 
3720.
Docket Number: 09-047. Applicant: Washington State University, P.O. Box 
641020, Pullman, WA 99164. Instrument: Electron Microscope. 
Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument 
will be used to study bulk amorphous metal alloys, nano-particle 
ceramics, nano-particle metals, polymer matrices and ceramic matrices. 
The instrument will be used to measure the thickness of deposited 
coatings at 1.0 nm resolution. Justification for Duty-Free Entry: No 
instruments of same general category are manufactured in the United 
States. Application accepted by Commissioner of Customs: July 31, 2009.

    Dated: August 24, 2009.
Christopher Cassel,
Acting Director, IA Subsidies Enforcement Office.
[FR Doc. E9-20824 Filed 8-27-09; 8:45 am]
BILLING CODE 3510-DS-S

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.