Delphi Corporation, Electronics and Safety Division, Including On-Site Leased Workers From Acro Service Corporation, Manpower, Manpower Professional, and Continental, Inc., Kokomo, IN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 28556-28557 [E9-14066]
Download as PDF
<![CDATA[
28556
Federal Register / Vol. 74, No. 114 / Tuesday, June 16, 2009 / Notices
Certification Regarding Eligibility to
Apply for Worker Adjustment
Assistance and Alternative Trade
Adjustment Assistance on July 12, 2007,
applicable to workers of WheelingPittsburgh Steel, Mingo Junction, Ohio.
The notice was published in the Federal
Register on July 26, 2007 (72 FR 41087).
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of steel slabs and coils. These include
low carbon steel slabs and hot rolled
sheet coil.
New information shows that
following a change in ownership in
August 2008, Wheeling Pittsburgh Steel
is currently known as SeverStal
Wheeling, Inc. Accordingly, the
Department is amending the
certification to reflect ownership by the
successor firm, SeverStal Wheeling, Inc.
The amended notice applicable to
TA–W–61,706 is hereby issued as
follows:
All workers of Wheeling Pittsburgh Steel,
currently known as SeverStal Wheeling, Inc.,
Mingo Junction, Ohio, who became totally or
partially separated from employment on or
after May 31, 2006, through July 12, 2009, are
eligible to apply for adjustment assistance
under Section 223 of the Trade Act of 1974,
and are also eligible to apply for alternative
trade adjustment assistance under Section
246 of the Trade Act of 1974.
Signed at Washington, DC this 12th day of
May 2009.
Linda G. Poole,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–14064 Filed 6–15–09; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–62,515]
mstockstill on PROD1PC66 with NOTICES
Drive Sol Global Steering, Inc. Steering
Division, Formerly Known as Timken
US Corporation, Currently Known as
Global Steering Systems, LLC
Including On-Site Leased Workers
From Kelly Services, Inc., Watertown,
CT; Amended Certification Regarding
Eligibility To Apply for Worker
Adjustment Assistance and Alternative
Trade Adjustment Assistance
Assistance and Alternative Trade
Adjustment Assistance on February 5,
2008, applicable to workers of Drive Sol
Global Steering, Inc., Steering Division,
Watertown, Connecticut. The notice was
published in the Federal Register on
February 22, 2008 (73 FR 9835). The
certification was amended on March 10,
2008 and August 20, 2008 to reflect the
former employers name and to include
on-site leased workers from Kelly
Services. The notices were published in
the Federal Register on March 17, 2008
(73 FR 14271) and August 29, 2008 (73
FR 51000–51001), respectively.
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of steering mechanical shafts.
New information shows that on
March 31, 2009, Wanxiang Corp.
purchased Drive Sol Global Steering
Systems, LLC. and is currently known
as Global Steering Systems, LLC.
Accordingly, the Department is
amending this certification to include
workers of the subject firm whose UI
wages are reported under the successor
firm, Global Steering Systems, LLC.
The amended notice applicable to
TA–W–62,515 is hereby issued as
follows:
All workers of Drive Sol Global Steering, Inc.,
Steering Division formerly known as Timken
US Corporation, currently known as Global
Steering Systems, LLC, including on-site
leased workers from Kelly Services,
Watertown, Connecticut, who became totally
or partially separated from employment on or
after November 29, 2006, through February 5,
2010, are eligible to apply for adjustment
assistance under Section 223 of the Trade Act
of 1974, and are also eligible to apply for
alternative trade adjustment assistance under
Section 246 of the Trade Act of 1974.
Signed at Washington, DC this 13th day of
May 2009.
Linda G. Poole,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–14065 Filed 6–15–09; 8:45 am]
BILLING CODE 4510–FN–P
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification Regarding Eligibility to
Apply for Worker Adjustment
VerDate Nov<24>2008
16:50 Jun 15, 2009
Jkt 217001
PO 00000
Frm 00084
Fmt 4703
Sfmt 4703
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–62,760]
Delphi Corporation, Electronics and
Safety Division, Including On-Site
Leased Workers From Acro Service
Corporation, Manpower, Manpower
Professional, and Continental, Inc.,
Kokomo, IN; Amended Certification
Regarding Eligibility To Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility to Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance on February 14, 2008,
applicable to workers of Delphi
Corporation, Electronics and Safety
Division, Kokomo, Indiana. The notice
was published in the Federal Register
on February 29, 2008 (73 FR 11152).
The certification was amended on
October 16, 2008 and April 14, 2009 to
include on-site leased workers from
Acro Service Corporation, Manpower
and Manpower Professional. The
notices were published in the Federal
Register on October 27, 2008 (73 FR
63733) and April 30, 2009 (74 FR
19989), respectfully.
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of various types of automobile
components, including: heating,
ventilating, air-conditioning systems
(HVAC), amplifiers, mainboards, gas
control modules, hybrid airmeter
electronics, hybrid ignition electronics,
pressure sensors, transmission control
modules, crash sensing devices,
occupant sensing devices, warning
systems and semiconductors.
New information shows that leased
workers of Continental, Inc. were
employed on-site at the Kokomo,
Indiana location of Delphi Corporation,
Electronics and Safety Division. The
Department has determined that these
workers were sufficiently under the
control of Delphi Corporation,
Electronics and Safety Division.
Based on these findings, the
Department is amending this
certification to include leased workers
of Continental, Inc. working on-site at
the Kokomo, Indiana location of the
subject firm.
E:\FR\FM\16JNN1.SGM
16JNN1
Federal Register / Vol. 74, No. 114 / Tuesday, June 16, 2009 / Notices
The intent of the Department’s
certification is to include all workers
employed at Delphi Corporation,
Electronics and Safety Division who
were adversely affected by a shift in
production Mexico.
The amended notice applicable to
TA–W–62,760 is hereby issued as
follows:
All workers of Delphi Corporation,
Electronics and Safety Division, including
on-site leased workers from Acro Service
Corporation, Manpower, Manpower
Professional and Continental, Inc., Kokomo,
Indiana, who became totally or partially
separated from employment on or after
January 28, 2007, through February 14, 2010,
are eligible to apply for adjustment assistance
under Section 223 of the Trade Act of 1974,
and are also eligible to apply for alternative
trade adjustment assistance under Section
246 of the Trade Act of 1974.
Signed at Washington, DC this 12th day of
May 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–14066 Filed 6–15–09; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–64,221]
mstockstill on PROD1PC66 with NOTICES
Hella Electronics Corporation,
Including Workers of Hella Corporate
Center, USA, Formerly Known as Hella
North America, Including On-Site
Leased Workers from Westaff, Flora,
IL; Amended Certification Regarding
Eligibility To Apply for Worker
Adjustment Assistance and Alternative
Trade Adjustment Assistance
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility to Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance on January 9, 2009,
applicable to workers of Hella
Electronics Corporation, Flora, Illinois,
including on-site leased workers from
Westaff. The notice was published in
the Federal Register on February 2,
2009 (74 FR 5870).
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers produce sensors and relays
such as accelerator pedal sensors,
washer pumps and various other
electronics for automobiles.
VerDate Nov<24>2008
16:50 Jun 15, 2009
Jkt 217001
The intent of the Department’s
certification is to include all workers of
the subject firm adversely affected by
the shift in production of accelerator
pedal sensors, washer pumps and
various other electronics for
automobiles to Mexico.
New information shows that the
worker group included workers of Hella
Corporate Center, USA, formerly known
as Hella North America. The
Department has determined that these
workers were not separately identifiable
from the workers of Hella Electronics
Corporation.
Based on these findings, the
Department is amending this
certification to include workers of Hella
Corporate Center, USA, formerly known
as Hella North America working at the
Flora, Illinois location of the subject
firm.
The amended notice applicable to
TA–W–64,221 is hereby issued as
follows:
‘‘All workers of Hella Electronics
Corporation, including workers of Hella
Corporate Center, USA, formerly known as
Hella North America, including on-site
leased workers from Westaff, Flora, Illinois,
who became totally or partially separated
from employment on or after October 13,
2007, through January 9, 2011, are eligible to
apply for adjustment assistance under
Section 223 of the Trade Act of 1974, and are
also eligible to apply for alternative trade
adjustment assistance under Section 246 of
the Trade Act of 1974.’’
Signed at Washington, DC, this 6th day of
May 2009.
Richard Church,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–14067 Filed 6–15–09; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–64,421]
Pacific Automotive, Components and
Systems International, Including OnSite Leased Workers from Quality
Temporary Service, Imlay City,
Michigan; Amended Certification
Regarding Eligibility To Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance
Adjustment Assistance on February 18,
2009 applicable to workers of Pacific
Automotive, Components and Systems
International, Imlay City, Michigan. The
notice was published in the Federal
Register on March 10, 2009 (74 FR
10303).
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of seat bolsters, armrests and door
bolsters for the auto industry.
The intent of the Department’s
certification is to include all secondarily
affected workers employed at Pacific
Automotive Components and Systems
International, Imlay City, Michigan.
New information shows that workers
leased from Quality Temporary Service
were employed on-site at the Imlay City,
Michigan location of Pacific Automotive
Components and Systems International.
The Department has determined that
these workers were sufficiently under
the control of the subject firm to be
considered leased workers.
Based on these findings, the
Department is amending this
certification to include leased workers
from Quality Temporary Service
working on-site at the Imlay City,
Michigan location of the subject firm.
The amended notice applicable to
TA–W–64,421 is hereby issued as
follows:
‘‘All workers of Pacific Automotive
Components and Systems International,
Imlay City, Michigan, including on-site
leased workers from Quality Temporary
Service, Imlay City, Michigan, who became
totally or partially separated from
employment on or after November 12, 2007,
through February 18, 2011, are eligible to
apply for trade adjustment assistance under
Section 223 of the Trade Act of 1974, and are
also eligible to apply for alternative trade
adjustment assistance under Section 246 of
the Trade Act of 1974.’’
Signed at Washington, DC this 6th day of
May 2009.
Linda G. Poole,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–14068 Filed 6–15–09; 8:45 am]
BILLING CODE 4510–FN–P
In accordance with Section 223 of the
Trade Act of 1974, as amended (19
U.S.C. 2273), the Department of Labor
issued a Certification of Eligibility to
Apply for Worker Adjustment
Assistance and Alternative Trade
PO 00000
Frm 00085
Fmt 4703
Sfmt 4703
28557
E:\FR\FM\16JNN1.SGM
16JNN1
]]>Agencies
[Federal Register Volume 74, Number 114 (Tuesday, June 16, 2009)]
[Notices]
[Pages 28556-28557]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-14066]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
[TA-W-62,760]
Delphi Corporation, Electronics and Safety Division, Including
On-Site Leased Workers From Acro Service Corporation, Manpower,
Manpower Professional, and Continental, Inc., Kokomo, IN; Amended
Certification Regarding Eligibility To Apply for Worker Adjustment
Assistance and Alternative Trade Adjustment Assistance
In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C.
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as
amended, the Department of Labor issued a Certification of Eligibility
to Apply for Worker Adjustment Assistance and Alternative Trade
Adjustment Assistance on February 14, 2008, applicable to workers of
Delphi Corporation, Electronics and Safety Division, Kokomo, Indiana.
The notice was published in the Federal Register on February 29, 2008
(73 FR 11152). The certification was amended on October 16, 2008 and
April 14, 2009 to include on-site leased workers from Acro Service
Corporation, Manpower and Manpower Professional. The notices were
published in the Federal Register on October 27, 2008 (73 FR 63733) and
April 30, 2009 (74 FR 19989), respectfully.
At the request of the State agency, the Department reviewed the
certification for workers of the subject firm. The workers are engaged
in the production of various types of automobile components, including:
heating, ventilating, air-conditioning systems (HVAC), amplifiers,
mainboards, gas control modules, hybrid airmeter electronics, hybrid
ignition electronics, pressure sensors, transmission control modules,
crash sensing devices, occupant sensing devices, warning systems and
semiconductors.
New information shows that leased workers of Continental, Inc. were
employed on-site at the Kokomo, Indiana location of Delphi Corporation,
Electronics and Safety Division. The Department has determined that
these workers were sufficiently under the control of Delphi
Corporation, Electronics and Safety Division.
Based on these findings, the Department is amending this
certification to include leased workers of Continental, Inc. working
on-site at the Kokomo, Indiana location of the subject firm.
[[Page 28557]]
The intent of the Department's certification is to include all
workers employed at Delphi Corporation, Electronics and Safety Division
who were adversely affected by a shift in production Mexico.
The amended notice applicable to TA-W-62,760 is hereby issued as
follows:
All workers of Delphi Corporation, Electronics and Safety
Division, including on-site leased workers from Acro Service
Corporation, Manpower, Manpower Professional and Continental, Inc.,
Kokomo, Indiana, who became totally or partially separated from
employment on or after January 28, 2007, through February 14, 2010,
are eligible to apply for adjustment assistance under Section 223 of
the Trade Act of 1974, and are also eligible to apply for
alternative trade adjustment assistance under Section 246 of the
Trade Act of 1974.
Signed at Washington, DC this 12th day of May 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E9-14066 Filed 6-15-09; 8:45 am]
BILLING CODE 4510-FN-P
