Drive Sol Global Steering, Inc. Steering Division, Formerly Known as Timken US Corporation, Currently Known as Global Steering Systems, LLC Including On-Site Leased Workers From Kelly Services, Inc., Watertown, CT; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 28556 [E9-14065]

Download as PDF 28556 Federal Register / Vol. 74, No. 114 / Tuesday, June 16, 2009 / Notices Certification Regarding Eligibility to Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance on July 12, 2007, applicable to workers of WheelingPittsburgh Steel, Mingo Junction, Ohio. The notice was published in the Federal Register on July 26, 2007 (72 FR 41087). At the request of the State agency, the Department reviewed the certification for workers of the subject firm. The workers are engaged in the production of steel slabs and coils. These include low carbon steel slabs and hot rolled sheet coil. New information shows that following a change in ownership in August 2008, Wheeling Pittsburgh Steel is currently known as SeverStal Wheeling, Inc. Accordingly, the Department is amending the certification to reflect ownership by the successor firm, SeverStal Wheeling, Inc. The amended notice applicable to TA–W–61,706 is hereby issued as follows: All workers of Wheeling Pittsburgh Steel, currently known as SeverStal Wheeling, Inc., Mingo Junction, Ohio, who became totally or partially separated from employment on or after May 31, 2006, through July 12, 2009, are eligible to apply for adjustment assistance under Section 223 of the Trade Act of 1974, and are also eligible to apply for alternative trade adjustment assistance under Section 246 of the Trade Act of 1974. Signed at Washington, DC this 12th day of May 2009. Linda G. Poole, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. E9–14064 Filed 6–15–09; 8:45 am] BILLING CODE 4510–FN–P DEPARTMENT OF LABOR Employment and Training Administration [TA–W–62,515] mstockstill on PROD1PC66 with NOTICES Drive Sol Global Steering, Inc. Steering Division, Formerly Known as Timken US Corporation, Currently Known as Global Steering Systems, LLC Including On-Site Leased Workers From Kelly Services, Inc., Watertown, CT; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance Assistance and Alternative Trade Adjustment Assistance on February 5, 2008, applicable to workers of Drive Sol Global Steering, Inc., Steering Division, Watertown, Connecticut. The notice was published in the Federal Register on February 22, 2008 (73 FR 9835). The certification was amended on March 10, 2008 and August 20, 2008 to reflect the former employers name and to include on-site leased workers from Kelly Services. The notices were published in the Federal Register on March 17, 2008 (73 FR 14271) and August 29, 2008 (73 FR 51000–51001), respectively. At the request of the State agency, the Department reviewed the certification for workers of the subject firm. The workers are engaged in the production of steering mechanical shafts. New information shows that on March 31, 2009, Wanxiang Corp. purchased Drive Sol Global Steering Systems, LLC. and is currently known as Global Steering Systems, LLC. Accordingly, the Department is amending this certification to include workers of the subject firm whose UI wages are reported under the successor firm, Global Steering Systems, LLC. The amended notice applicable to TA–W–62,515 is hereby issued as follows: All workers of Drive Sol Global Steering, Inc., Steering Division formerly known as Timken US Corporation, currently known as Global Steering Systems, LLC, including on-site leased workers from Kelly Services, Watertown, Connecticut, who became totally or partially separated from employment on or after November 29, 2006, through February 5, 2010, are eligible to apply for adjustment assistance under Section 223 of the Trade Act of 1974, and are also eligible to apply for alternative trade adjustment assistance under Section 246 of the Trade Act of 1974. Signed at Washington, DC this 13th day of May 2009. Linda G. Poole, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. E9–14065 Filed 6–15–09; 8:45 am] BILLING CODE 4510–FN–P In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C. 2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as amended, the Department of Labor issued a Certification Regarding Eligibility to Apply for Worker Adjustment VerDate Nov<24>2008 16:50 Jun 15, 2009 Jkt 217001 PO 00000 Frm 00084 Fmt 4703 Sfmt 4703 DEPARTMENT OF LABOR Employment and Training Administration [TA–W–62,760] Delphi Corporation, Electronics and Safety Division, Including On-Site Leased Workers From Acro Service Corporation, Manpower, Manpower Professional, and Continental, Inc., Kokomo, IN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C. 2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as amended, the Department of Labor issued a Certification of Eligibility to Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance on February 14, 2008, applicable to workers of Delphi Corporation, Electronics and Safety Division, Kokomo, Indiana. The notice was published in the Federal Register on February 29, 2008 (73 FR 11152). The certification was amended on October 16, 2008 and April 14, 2009 to include on-site leased workers from Acro Service Corporation, Manpower and Manpower Professional. The notices were published in the Federal Register on October 27, 2008 (73 FR 63733) and April 30, 2009 (74 FR 19989), respectfully. At the request of the State agency, the Department reviewed the certification for workers of the subject firm. The workers are engaged in the production of various types of automobile components, including: heating, ventilating, air-conditioning systems (HVAC), amplifiers, mainboards, gas control modules, hybrid airmeter electronics, hybrid ignition electronics, pressure sensors, transmission control modules, crash sensing devices, occupant sensing devices, warning systems and semiconductors. New information shows that leased workers of Continental, Inc. were employed on-site at the Kokomo, Indiana location of Delphi Corporation, Electronics and Safety Division. The Department has determined that these workers were sufficiently under the control of Delphi Corporation, Electronics and Safety Division. Based on these findings, the Department is amending this certification to include leased workers of Continental, Inc. working on-site at the Kokomo, Indiana location of the subject firm. E:\FR\FM\16JNN1.SGM 16JNN1

Agencies

[Federal Register Volume 74, Number 114 (Tuesday, June 16, 2009)]
[Notices]
[Page 28556]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-14065]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration

[TA-W-62,515]


Drive Sol Global Steering, Inc. Steering Division, Formerly Known 
as Timken US Corporation, Currently Known as Global Steering Systems, 
LLC Including On-Site Leased Workers From Kelly Services, Inc., 
Watertown, CT; Amended Certification Regarding Eligibility To Apply for 
Worker Adjustment Assistance and Alternative Trade Adjustment 
Assistance

    In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C. 
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as 
amended, the Department of Labor issued a Certification Regarding 
Eligibility to Apply for Worker Adjustment Assistance and Alternative 
Trade Adjustment Assistance on February 5, 2008, applicable to workers 
of Drive Sol Global Steering, Inc., Steering Division, Watertown, 
Connecticut. The notice was published in the Federal Register on 
February 22, 2008 (73 FR 9835). The certification was amended on March 
10, 2008 and August 20, 2008 to reflect the former employers name and 
to include on-site leased workers from Kelly Services. The notices were 
published in the Federal Register on March 17, 2008 (73 FR 14271) and 
August 29, 2008 (73 FR 51000-51001), respectively.
    At the request of the State agency, the Department reviewed the 
certification for workers of the subject firm. The workers are engaged 
in the production of steering mechanical shafts.
    New information shows that on March 31, 2009, Wanxiang Corp. 
purchased Drive Sol Global Steering Systems, LLC. and is currently 
known as Global Steering Systems, LLC.
    Accordingly, the Department is amending this certification to 
include workers of the subject firm whose UI wages are reported under 
the successor firm, Global Steering Systems, LLC.
    The amended notice applicable to TA-W-62,515 is hereby issued as 
follows:

All workers of Drive Sol Global Steering, Inc., Steering Division 
formerly known as Timken US Corporation, currently known as Global 
Steering Systems, LLC, including on-site leased workers from Kelly 
Services, Watertown, Connecticut, who became totally or partially 
separated from employment on or after November 29, 2006, through 
February 5, 2010, are eligible to apply for adjustment assistance 
under Section 223 of the Trade Act of 1974, and are also eligible to 
apply for alternative trade adjustment assistance under Section 246 
of the Trade Act of 1974.

    Signed at Washington, DC this 13th day of May 2009.
Linda G. Poole,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E9-14065 Filed 6-15-09; 8:45 am]
BILLING CODE 4510-FN-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.