Delphi Corporation Electronics and Safety Division Including On-Site Leased Workers From Acro Service Corporation, Manpower and Manpower Professional, Kokomo, IN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 19989 [E9-9936]
Download as PDF
<![CDATA[
Federal Register / Vol. 74, No. 82 / Thursday, April 30, 2009 / Notices
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
• Enhance the quality, utility, and
clarity of the information to be
collected; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submissions
of responses.
A copy of the proposed information
collection request can be obtained by
contacting the employee listed in the
FOR FURTHER INFORMATION CONTACT
section of this notice, or viewed on the
Internet by accessing the MSHA home
page (https://www.msha.gov/) and
selecting ‘‘Rules & Regs’’, and then
selecting ‘‘FedReg. Docs’’. On the next
screen, select ‘‘Paperwork Reduction
Act Supporting Statement’’ to view
documents supporting the Federal
Register Notice.
III. Current Actions
The information provided by the mine
operator on the dust data card that
accompanies each dust sample, the
reporting of when such samples will be
collected to allow MSHA to observe the
actual collection, and the reporting of
any changes in operation status affecting
sampling, are vital to effectively
administer the operator sampling
program. This allows MSHA to
determine not only whether mine
operators have complied with the
sampling requirements stipulated in the
regulations but also which operators
were in noncompliance with the
applicable dust standard. After
processing, results are reported back to
mine operators for posting on the mine
bulletin board and viewing by miners.
MSHA also uses this information to
plan enforcement activities and evaluate
programs.
Type of Review: Extension.
Agency: Mine Safety and Health
Administration.
Title: Mine Operator Dust Cards.
OMB Number: 1219–0011.
Frequency: On occasion.
Affected Public: Business or other forprofit.
Respondents: 830.
Responses: 41,000.
Burden Hours: 33,199.
Total Burden Cost: $2,989,000.
Comments submitted in response to
this notice will be summarized and/or
included in the request for Office of
VerDate Nov<24>2008
15:35 Apr 29, 2009
Jkt 217001
Management and Budget approval of the
information collection request; they will
also become a matter of public record.
Dated at Arlington, Virginia, this 24th day
of April 2009.
John Rowlett,
Director of Management Services Division.
[FR Doc. E9–9943 Filed 4–29–09; 8:45 am]
BILLING CODE 4510–43–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–62,760]
Delphi Corporation Electronics and
Safety Division Including On-Site
Leased Workers From Acro Service
Corporation, Manpower and Manpower
Professional, Kokomo, IN; Amended
Certification Regarding Eligibility To
Apply for Worker Adjustment
Assistance and Alternative Trade
Adjustment Assistance
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility To Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance on February 14, 2008,
applicable to workers of Delphi
Corporation, Electronics and Safety
Division, Kokomo, Indiana. The notice
was published in the Federal Register
on February 29, 2008 (73 FR 11152).
The certification was amended on
October 16, 2008 to include on-site
leased workers from Acro Service
Corporation. The notice was published
in the Federal Register on October 27,
2008 (73 FR 63733).
At the request of the petitioner, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of various types of automobile
components, including: Heating,
ventilating, air-conditioning systems
(HVAC), amplifiers, mainboards, gas
control modules, hybrid airmeter
electronics, hybrid ignition electronics,
pressure sensors, transmission control
modules, crash sensing devices,
occupant sensing devices, warning
systems and semiconductors.
New information shows that leased
workers of Manpower and Manpower
Professional were employed on-site at
the Kokomo, Indiana location of Delphi
Corporation, Electronics and Safety
Division. The Department has
determined that these workers are
PO 00000
Frm 00061
Fmt 4703
Sfmt 4703
19989
sufficiently under the control of Delphi
Corporation, Electronics and Safety
Division.
Based on these findings, the
Department is amending this
certification to include leased workers
of Manpower and Manpower
Professional working on-site at the
Kokomo, Indiana location of the subject
firm.
The intent of the Department’s
certification is to include all workers
employed at Delphi Corporation,
Electronics and Safety Division who
were adversely affected by a shift in
production in Mexico.
The amended notice applicable to
TA–W–62,760 is hereby issued as
follows:
All workers of Delphi Corporation,
Electronics and Safety Division, including
on-site leased workers from Acro Service
Corporation, Manpower and Manpower
Professional, Kokomo, Indiana, who became
totally or partially separated from
employment on or after January 28, 2007,
through February 14, 2010, are eligible to
apply for adjustment assistance under
Section 223 of the Trade Act of 1974, and are
also eligible to apply for alternative trade
adjustment assistance under Section 246 of
the Trade Act of 1974.
Signed at Washington, DC, this 14th day of
April 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E9–9936 Filed 4–29–09; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
Employment and Training
Administration
[TA–W–64,229B; TA–W–64,229C]
Hanesbrands, Inc. Formely Known as
Sara Lee Branded Apparel Including
On-Site Leased Workers From
Diversco Integrated Services and Kelly
Services, Inc., Gastonia, NC;
Hanesbrands, Inc. Formely Known as
Sara Lee Branded Apparel Including
On-Site Leased Workers From
Diversco Integrated Services and Kelly
Services, Inc., Rockingham, NC;
Amended Certification Regarding
Eligibility To Apply for Worker
Adjustment Assistance and Alternative
Trade Adjustment Assistance
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification of Eligibility to Apply for
Worker Adjustment Assistance and
E:\FR\FM\30APN1.SGM
30APN1
]]>Agencies
[Federal Register Volume 74, Number 82 (Thursday, April 30, 2009)]
[Notices]
[Page 19989]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E9-9936]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
[TA-W-62,760]
Delphi Corporation Electronics and Safety Division Including On-
Site Leased Workers From Acro Service Corporation, Manpower and
Manpower Professional, Kokomo, IN; Amended Certification Regarding
Eligibility To Apply for Worker Adjustment Assistance and Alternative
Trade Adjustment Assistance
In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C.
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as
amended, the Department of Labor issued a Certification of Eligibility
To Apply for Worker Adjustment Assistance and Alternative Trade
Adjustment Assistance on February 14, 2008, applicable to workers of
Delphi Corporation, Electronics and Safety Division, Kokomo, Indiana.
The notice was published in the Federal Register on February 29, 2008
(73 FR 11152). The certification was amended on October 16, 2008 to
include on-site leased workers from Acro Service Corporation. The
notice was published in the Federal Register on October 27, 2008 (73 FR
63733).
At the request of the petitioner, the Department reviewed the
certification for workers of the subject firm. The workers are engaged
in the production of various types of automobile components, including:
Heating, ventilating, air-conditioning systems (HVAC), amplifiers,
mainboards, gas control modules, hybrid airmeter electronics, hybrid
ignition electronics, pressure sensors, transmission control modules,
crash sensing devices, occupant sensing devices, warning systems and
semiconductors.
New information shows that leased workers of Manpower and Manpower
Professional were employed on-site at the Kokomo, Indiana location of
Delphi Corporation, Electronics and Safety Division. The Department has
determined that these workers are sufficiently under the control of
Delphi Corporation, Electronics and Safety Division.
Based on these findings, the Department is amending this
certification to include leased workers of Manpower and Manpower
Professional working on-site at the Kokomo, Indiana location of the
subject firm.
The intent of the Department's certification is to include all
workers employed at Delphi Corporation, Electronics and Safety Division
who were adversely affected by a shift in production in Mexico.
The amended notice applicable to TA-W-62,760 is hereby issued as
follows:
All workers of Delphi Corporation, Electronics and Safety
Division, including on-site leased workers from Acro Service
Corporation, Manpower and Manpower Professional, Kokomo, Indiana,
who became totally or partially separated from employment on or
after January 28, 2007, through February 14, 2010, are eligible to
apply for adjustment assistance under Section 223 of the Trade Act
of 1974, and are also eligible to apply for alternative trade
adjustment assistance under Section 246 of the Trade Act of 1974.
Signed at Washington, DC, this 14th day of April 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E9-9936 Filed 4-29-09; 8:45 am]
BILLING CODE 4510-FN-P
