Submission for OMB Review: Comment Request, 10469-10470 [E8-3639]
Download as PDF
<![CDATA[
Federal Register / Vol. 73, No. 39 / Wednesday, February 27, 2008 / Notices
jlentini on PROD1PC65 with NOTICES
and, (3) tracks recruitment activities to
permit analyses of these efforts in any
examination of potential barriers to
equality of opportunity. Agencies must
also ‘‘conduct an internal review and
analysis of the effects of all current and
proposed policies, practices, and
conditions that directly or indirectly,’’
related to the employment of
individuals with disabilities based on
their race, national origin, gender and
disabilities. However, an Agency may
not conduct or sponsor, and a person is
not required to, a collection of
information, unless it displays a
currently valid OMB control number. In
order to comply with MD 715, the FBI
is requesting clearance from OMB in
accordance with established review
procedures of the Paperwork Reduction
Act of 1995. Once cleared for use, the
form will be used to collect race,
national origin, gender, and disability
demographic information from
applicants registering in the FBI’s
automated hiring system. All job
applicants, whether internal or external,
would be asked to complete, on a
voluntary basis, an ‘‘Applicant
Questionnaire: Race, National Origin,
Gender, and Disability Demographics.’’
The FBI must collect and evaluate
information and data necessary to make
an informed assessment the extent to
which the Agency is meeting its
responsibility to provide employment
opportunities for qualified applicants
and employees with disabilities,
especially those with target disabilities.
(5) An estimate of the total number of
respondents and the amount of time
estimated for an average respondent to
respond: Total number of respondents:
609,246 Frequency of response: One
time completion of questionnaire per
respondent. Estimated time for average
respondent to respond: 5 minutes.
(6) An estimate of the total public
burden (in hours) associated with this
collection: There are approximately
50,505 annual burden hours associated
with this collection.
(7) An estimate of the total annual
cost: None.
If additional information is required
contact: Ms. Lynn Bryant, Department
Clearance Officer, Justice Management
Division, United States Department of
Justice, Patrick Henry Building, Suite
1600, 601 D Street, NW., Washington,
DC 20530.
Dated: February 21, 2008.
Lynn Bryant,
Department Clearance Officer, PRA, U.S.
Department of Justice.
[FR Doc. E8–3684 Filed 2–26–08; 8:45 am]
BILLING CODE 4410–02–P
VerDate Aug<31>2005
19:49 Feb 26, 2008
Jkt 214001
DEPARTMENT OF LABOR
Office of the Secretary
Submission for OMB Review:
Comment Request
February 20, 2008.
The Department of Labor (DOL)
hereby announces the submission of the
following public information collection
requests (ICR) to the Office of
Management and Budget (OMB) for
review and approval in accordance with
the Paperwork Reduction Act of 1995
(Pub. L. 104–13, 44 U.S.C. chapter 35).
A copy of each ICR, with applicable
supporting documentation; including
among other things a description of the
likely respondents, proposed frequency
of response, and estimated total burden
may be obtained from the RegInfo.gov
Web site at https://www.reginfo.gov/
public/do/PRAMain or by contacting
Darrin King on 202–693–4129 (this is
not a toll-free number)/e-mail:
king.darrin@dol.gov.
Interested parties are encouraged to
send comments to the Office of
Information and Regulatory Affairs,
Attn: John Kraemer, OMB Desk Officer
for the Mine Safety and Health
Administration (MSHA), Office of
Management and Budget, 725 17th
Street, NW., Room 10235, Washington,
DC 20503, Telephone: 202–395–4816/
Fax: 202–395–6974 (these are not tollfree numbers), E-mail:
OIRA_submission@omb.eop.gov within
30 days from the date of this publication
in the Federal Register. In order to
ensure the appropriate consideration,
comments should reference the
applicable OMB Control Number (see
below).
The OMB is particularly interested in
comments which:
• Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
• Enhance the quality, utility, and
clarity of the information to be
collected; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
PO 00000
Frm 00052
Fmt 4703
Sfmt 4703
10469
e.g., permitting electronic submission of
responses.
Agency: Mine Safety and Health
Administration.
Type of Review: Extension without
change of currently approved collection.
Title: Mine Accident, Injury & Illness
Report and Quarterly Mine Employment
and Coal Production Report (30 CFR
50.10; 50.11; 50.20; and 50.30).
OMB Control Number: 1219–0007.
Form Number: MSHA–7000–1 and
MSHA–7000–2.
Estimated Number of Respondents:
22,295.
Estimated Total Annual Burden
Hours: 270,666.
Estimated Total Annual Cost Burden:
$31,993.
Affected Public: Private Sector:
Business or other for-profit (Mines).
Description: The reporting and
recordkeeping provisions in 30 CFR part
50, Notification, Investigation, Reports
and Records of Accidents, Injuries and
Illnesses, Employment and Coal
Production in Mines, are essential
elements in MSHA’s Congressional
mandate to reduce work-related injuries
and illnesses among the nation’s miners.
See section 103 of the Federal Mine
Safety and Health Act of 1977.
Section 50.10 requires mine operators
and mining contractors to immediately
notify MSHA in the event of an
accident. This immediate notification is
critical to MSHA’s timely investigation
and assessment of the probable cause of
the accident.
Section 50.11 requires that the
operator or contractor investigate each
accident and occupational injury and
prepare a report. The operator or
contractor may not use MSHA Form
7000–1 as a report, unless the mine
employs fewer than 20 miners and the
occurrence involves an occupational
injury not related to an accident.
Section 50.20(a) requires mine
operators and mining contractors to
report each accident, injury, or illness to
MSHA on Form 7000–1 within 10
working days after an accident or injury
has occurred or an occupational illness
has been diagnosed. The use of MSHA
Form 7000–1 provides for uniform
information gathering across the mining
industry.
Section 50.30(a) requires mine
operators and independent contractors
working on mine property to report
quarterly employment and coal
production to MSHA on Form 7000–2.
MSHA tabulates and analyzes the
information from MSHA Form 7000–1,
along with data from MSHA Form
7000–2, Quarterly Mine Employment
and Coal Production Report to compute
incidence and severity rates for various
E:\FR\FM\27FEN1.SGM
27FEN1
jlentini on PROD1PC65 with NOTICES
10470
Federal Register / Vol. 73, No. 39 / Wednesday, February 27, 2008 / Notices
injury types. These rates are used to
analyze trends and to assess the degree
of success of the health and safety
efforts of MSHA and the mining
industry.
Accident, injury, and illness data,
when correlated with employment and
production data, provide information
that allows MSHA to improve its safety
and health enforcement programs, focus
its education and training efforts, and
establish priorities for its technical
assistance activities in mine safety and
health. Maintaining a current database
allows MSHA to identify and direct
increased attention to those mines,
industry segments, and geographical
areas where hazardous trends are
developing. This could not be done
effectively utilizing historical data. The
information collected under Part 50 is
the most comprehensive and reliable
occupational data available concerning
the mining industry.
Data collected through MSHA Form
7000–1 and MSHA Form 7000–2 enable
MSHA to publish timely quarterly and
annual statistics, reflecting current
safety and health conditions in the
mining industry. The data gathered from
this collection provides MSHA with the
figures upon which to base its incidence
rate calculations and trend analyses.
These data are used not only by MSHA,
but also by other Federal and State
agencies, health and safety researchers,
and the mining community to assist in
measuring and comparing the results of
health and safety efforts both in the
United States and internationally.
MSHA also uses this information to
target its inspection and assistance
activities toward those mines, industry
segments, and geographical areas which
the current data demonstrate as having
particular problems. Injury rates must
be computed at least quarterly for
MSHA to target its enforcement and
assistance resources. Less frequent data
collection would neither be timely nor
statistically valid for this purpose.
The mining industry uses this
quarterly injury incidence data in its
efforts to reduce injuries and illnesses.
MSHA’s compilations are the only
source of information which permit a
particular mining operation to compare
its record with that of similar mines.
Coal production data are used in various
analyses that range from a comparative
nature to complex modeling—such as
the Cost of Injury Model developed
through research. Additionally, this
information impacts the evaluation and
review of MSHA’s regulations, the
development of new safety and health
standards, and the evaluation of
MSHA’s programs. For additional
information, see related notice
VerDate Aug<31>2005
19:49 Feb 26, 2008
Jkt 214001
published at 72 FR 70348 on December
11, 2007.
Agency: Mine Safety and Health
Administration.
Type of Review: Extension without
change of currently approved collection.
Title: Qualification/Certification
Program and Man Hoist Operators
Physical Fitness.
OMB Number: 1219–0127.
Form Number: MSHA–5000–41.
Estimated Number of Respondents:
1,721.
Estimated Total Annual Burden
Hours: 15,355.
Estimated Total Annual Cost Burden:
$8,047.
Affected Public: Private Sector:
Business or other for-profit (Mines).
Description: Title 30 CFR 75.159 and
77.106 require coal mine operators to
maintain a list of persons who are
certified and those who are qualified to
perform duties which require
specialized expertise at underground
and surface coal mines, i.e., conduct
examinations for hazardous conditions,
conduct tests for methane and oxygen
deficiency, conduct tests of air flow,
perform electrical work, repair
energized surface high-voltage lines,
and perform duties of hoisting engineer.
The recorded information is necessary
to ensure that only persons who are
properly trained and have the required
number of years of experience are
permitted to perform these duties.
MSHA does not specify a format for the
recordkeeping; however, it normally
consists of the names of the certified
and qualified persons listed in two
columns on a sheet of paper. One
column is for certified persons and the
other is for qualified persons.
Sections 75.100 and 77.100 pertain to
the certification of certain persons to
perform specific examinations and tests.
Sections 75.155 and 77.105 outline the
requirements necessary to be qualified
as a hoisting engineer or hoist man.
Also, under §§ 75.160, 75.161, 77.107
and 77.107–1, the mine operator must
have an approved training plan
developed to train and retrain the
qualified and certified people to
effectively do their tasks.
These regulations recognize State
certification and qualification programs.
However, where State programs are not
available, MSHA may certify and
qualify persons. The MSHA program
will continue to qualify or certify
individuals as long as these individuals
meet the requirements for certification
or qualification, fulfill any applicable
retraining requirements, and remain
employed at the same mine or by the
same independent contractor.
PO 00000
Frm 00053
Fmt 4703
Sfmt 4703
Applications for Secretarial
qualification or certification are
submitted to the MSHA Qualification
and Certification Unit in Denver,
Colorado. MSHA Form 5000–41
provides the coal mining industry with
a standardized reporting format that
expedites the certification and
qualification process while ensuring
compliance with the regulations.
MSHA uses the Form’s information to
determine if applicants satisfy the
requirements to obtain the certification
or qualification sought. Persons must
meet certain minimum experience
requirements depending on the type of
certification or qualification.
The information is used by the mine
operator and MSHA enforcement
personnel to determine whether
certified and qualified persons, who are
properly trained, are conducting tests or
examinations, and operating hoisting
equipment.
Form 5000–41 allows mining
operators to report to MSHA the names
of persons who have satisfactorily
completed required mine foreman and
hoisting training. MSHA uses the
information to issue certification/
qualification cards to those persons who
are certified/qualified.
Mine operators also use the Form to
submit an application to certify miners
to perform specific required
examinations and tests, or to qualify
miners as hoisting engineers or hoist
men, in States without certification
programs. The Qualification and
Certification Unit then mails the
applicant a certificate. This certification
satisfies the law where State
certification programs are not available.
For additional information, see related
notice published at 72 FR 70349 on
December 11, 2007.
Darrin A. King,
Acting Departmental Clearance Officer.
[FR Doc. E8–3639 Filed 2–26–08; 8:45 am]
BILLING CODE 4510–43–P
DEPARTMENT OF LABOR
Employment Standards Administration
Proposed Extension of the Approval of
Information Collection Requirements
ACTION:
Notice.
SUMMARY: The Department of Labor, as
part of its continuing effort to reduce
paperwork and respondent burden,
conducts a preclearance consultation
program to provide the general public
and Federal agencies with an
opportunity to comment on proposed
and/or continuing collections of
E:\FR\FM\27FEN1.SGM
27FEN1
]]>Agencies
[Federal Register Volume 73, Number 39 (Wednesday, February 27, 2008)]
[Notices]
[Pages 10469-10470]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E8-3639]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Office of the Secretary
Submission for OMB Review: Comment Request
February 20, 2008.
The Department of Labor (DOL) hereby announces the submission of
the following public information collection requests (ICR) to the
Office of Management and Budget (OMB) for review and approval in
accordance with the Paperwork Reduction Act of 1995 (Pub. L. 104-13, 44
U.S.C. chapter 35). A copy of each ICR, with applicable supporting
documentation; including among other things a description of the likely
respondents, proposed frequency of response, and estimated total burden
may be obtained from the RegInfo.gov Web site at https://
www.reginfo.gov/public/do/PRAMain or by contacting Darrin King on 202-
693-4129 (this is not a toll-free number)/e-mail: king.darrin@dol.gov.
Interested parties are encouraged to send comments to the Office of
Information and Regulatory Affairs, Attn: John Kraemer, OMB Desk
Officer for the Mine Safety and Health Administration (MSHA), Office of
Management and Budget, 725 17th Street, NW., Room 10235, Washington, DC
20503, Telephone: 202-395-4816/ Fax: 202-395-6974 (these are not toll-
free numbers), E-mail: OIRA_submission@omb.eop.gov within 30 days from
the date of this publication in the Federal Register. In order to
ensure the appropriate consideration, comments should reference the
applicable OMB Control Number (see below).
The OMB is particularly interested in comments which:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility;
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used;
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Agency: Mine Safety and Health Administration.
Type of Review: Extension without change of currently approved
collection.
Title: Mine Accident, Injury & Illness Report and Quarterly Mine
Employment and Coal Production Report (30 CFR 50.10; 50.11; 50.20; and
50.30).
OMB Control Number: 1219-0007.
Form Number: MSHA-7000-1 and MSHA-7000-2.
Estimated Number of Respondents: 22,295.
Estimated Total Annual Burden Hours: 270,666.
Estimated Total Annual Cost Burden: $31,993.
Affected Public: Private Sector: Business or other for-profit
(Mines).
Description: The reporting and recordkeeping provisions in 30 CFR
part 50, Notification, Investigation, Reports and Records of Accidents,
Injuries and Illnesses, Employment and Coal Production in Mines, are
essential elements in MSHA's Congressional mandate to reduce work-
related injuries and illnesses among the nation's miners. See section
103 of the Federal Mine Safety and Health Act of 1977.
Section 50.10 requires mine operators and mining contractors to
immediately notify MSHA in the event of an accident. This immediate
notification is critical to MSHA's timely investigation and assessment
of the probable cause of the accident.
Section 50.11 requires that the operator or contractor investigate
each accident and occupational injury and prepare a report. The
operator or contractor may not use MSHA Form 7000-1 as a report, unless
the mine employs fewer than 20 miners and the occurrence involves an
occupational injury not related to an accident.
Section 50.20(a) requires mine operators and mining contractors to
report each accident, injury, or illness to MSHA on Form 7000-1 within
10 working days after an accident or injury has occurred or an
occupational illness has been diagnosed. The use of MSHA Form 7000-1
provides for uniform information gathering across the mining industry.
Section 50.30(a) requires mine operators and independent
contractors working on mine property to report quarterly employment and
coal production to MSHA on Form 7000-2. MSHA tabulates and analyzes the
information from MSHA Form 7000-1, along with data from MSHA Form 7000-
2, Quarterly Mine Employment and Coal Production Report to compute
incidence and severity rates for various
[[Page 10470]]
injury types. These rates are used to analyze trends and to assess the
degree of success of the health and safety efforts of MSHA and the
mining industry.
Accident, injury, and illness data, when correlated with employment
and production data, provide information that allows MSHA to improve
its safety and health enforcement programs, focus its education and
training efforts, and establish priorities for its technical assistance
activities in mine safety and health. Maintaining a current database
allows MSHA to identify and direct increased attention to those mines,
industry segments, and geographical areas where hazardous trends are
developing. This could not be done effectively utilizing historical
data. The information collected under Part 50 is the most comprehensive
and reliable occupational data available concerning the mining
industry.
Data collected through MSHA Form 7000-1 and MSHA Form 7000-2 enable
MSHA to publish timely quarterly and annual statistics, reflecting
current safety and health conditions in the mining industry. The data
gathered from this collection provides MSHA with the figures upon which
to base its incidence rate calculations and trend analyses. These data
are used not only by MSHA, but also by other Federal and State
agencies, health and safety researchers, and the mining community to
assist in measuring and comparing the results of health and safety
efforts both in the United States and internationally.
MSHA also uses this information to target its inspection and
assistance activities toward those mines, industry segments, and
geographical areas which the current data demonstrate as having
particular problems. Injury rates must be computed at least quarterly
for MSHA to target its enforcement and assistance resources. Less
frequent data collection would neither be timely nor statistically
valid for this purpose.
The mining industry uses this quarterly injury incidence data in
its efforts to reduce injuries and illnesses. MSHA's compilations are
the only source of information which permit a particular mining
operation to compare its record with that of similar mines. Coal
production data are used in various analyses that range from a
comparative nature to complex modeling--such as the Cost of Injury
Model developed through research. Additionally, this information
impacts the evaluation and review of MSHA's regulations, the
development of new safety and health standards, and the evaluation of
MSHA's programs. For additional information, see related notice
published at 72 FR 70348 on December 11, 2007.
Agency: Mine Safety and Health Administration.
Type of Review: Extension without change of currently approved
collection.
Title: Qualification/Certification Program and Man Hoist Operators
Physical Fitness.
OMB Number: 1219-0127.
Form Number: MSHA-5000-41.
Estimated Number of Respondents: 1,721.
Estimated Total Annual Burden Hours: 15,355.
Estimated Total Annual Cost Burden: $8,047.
Affected Public: Private Sector: Business or other for-profit
(Mines).
Description: Title 30 CFR 75.159 and 77.106 require coal mine
operators to maintain a list of persons who are certified and those who
are qualified to perform duties which require specialized expertise at
underground and surface coal mines, i.e., conduct examinations for
hazardous conditions, conduct tests for methane and oxygen deficiency,
conduct tests of air flow, perform electrical work, repair energized
surface high-voltage lines, and perform duties of hoisting engineer.
The recorded information is necessary to ensure that only persons who
are properly trained and have the required number of years of
experience are permitted to perform these duties. MSHA does not specify
a format for the recordkeeping; however, it normally consists of the
names of the certified and qualified persons listed in two columns on a
sheet of paper. One column is for certified persons and the other is
for qualified persons.
Sections 75.100 and 77.100 pertain to the certification of certain
persons to perform specific examinations and tests. Sections 75.155 and
77.105 outline the requirements necessary to be qualified as a hoisting
engineer or hoist man. Also, under Sec. Sec. 75.160, 75.161, 77.107
and 77.107-1, the mine operator must have an approved training plan
developed to train and retrain the qualified and certified people to
effectively do their tasks.
These regulations recognize State certification and qualification
programs. However, where State programs are not available, MSHA may
certify and qualify persons. The MSHA program will continue to qualify
or certify individuals as long as these individuals meet the
requirements for certification or qualification, fulfill any applicable
retraining requirements, and remain employed at the same mine or by the
same independent contractor.
Applications for Secretarial qualification or certification are
submitted to the MSHA Qualification and Certification Unit in Denver,
Colorado. MSHA Form 5000-41 provides the coal mining industry with a
standardized reporting format that expedites the certification and
qualification process while ensuring compliance with the regulations.
MSHA uses the Form's information to determine if applicants satisfy
the requirements to obtain the certification or qualification sought.
Persons must meet certain minimum experience requirements depending on
the type of certification or qualification.
The information is used by the mine operator and MSHA enforcement
personnel to determine whether certified and qualified persons, who are
properly trained, are conducting tests or examinations, and operating
hoisting equipment.
Form 5000-41 allows mining operators to report to MSHA the names of
persons who have satisfactorily completed required mine foreman and
hoisting training. MSHA uses the information to issue certification/
qualification cards to those persons who are certified/qualified.
Mine operators also use the Form to submit an application to
certify miners to perform specific required examinations and tests, or
to qualify miners as hoisting engineers or hoist men, in States without
certification programs. The Qualification and Certification Unit then
mails the applicant a certificate. This certification satisfies the law
where State certification programs are not available. For additional
information, see related notice published at 72 FR 70349 on December
11, 2007.
Darrin A. King,
Acting Departmental Clearance Officer.
[FR Doc. E8-3639 Filed 2-26-08; 8:45 am]
BILLING CODE 4510-43-P
