Applications for Duty-Free Entry of Scientific Instruments, 71360 [E7-24277]

Download as PDF 71360 Federal Register / Vol. 72, No. 241 / Monday, December 17, 2007 / Notices product comparison criteria currently being used in this case. Therefore, in accordance with section 751(a)(3)(A) of the Act, the Department is extending the time for completion of the final results of this review until March 5, 2008, which is 180 days after the date on which notice of the preliminary results was published in the Federal Register. We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777 (i)(1) of the Act. Dated: December 11, 2007. Stephen J. Claeys, Deputy Assistant Secretary for Import Administration. [FR Doc. E7–24375 Filed 12–14–07; 8:45 am] BILLING CODE 3510–DS–S packages and examine the bonding layers and interfaces. Having a spatial resolution of .5 micron or less is a critical parameter because it is one of the factors that determines the minimum feature size that can be detected and imaged. Application accepted by Commissioner of Customs: November 7, 2007. Dated: December 7, 2007. Faye Robinson, Director, Statutory Import Programs Staff, Import Administration. [FR Doc. E7–24278 Filed 12–14–07; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE DEPARTMENT OF COMMERCE Applications for Duty–Free Entry of Scientific Instruments International Trade Administration Pursuant to Section 6(c) of the Educational, Scientific andCultural Materials Importation Act of 1966 (Pub. L. 89–651, asamended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before January 7, 2008. Address written comments to Statutory Import Programs Staff, Room 2104, U.S. Department of Commerce, Washington, D.C. 20230. Applications may be examined between 8:30 A.M. and 5:00 P.M. at the U.S. Department of Commerce in Room 2104. Docket Number: 07–068. Applicant: University of Utah, 201 S. President’s Circle, Salt Lake City, UT 84112. Instrument: Electron Microscope, Model Nova NanoSEM 430. Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument is intended to be used for the imaging of nanoparticles as well as chemical characterization of a wide variety of materials. The instrument will also be used to measure the size and chemical composition of nanoparticles and nanostructures and to create nanostructures using electron beam lithography. The objectives of the experiments will be to characterize the size and shapes of nanoparticles, nantubes and nanowires and determine the chemical composition of clays and other mineralogical samples. Application accepted by Commissioner of Customs: November 13, 2007. Docket Number: 07–069. Applicant: The Children’s Hospital, 1056 E. 19th ebenthall on PROD1PC69 with NOTICES Pursuant to Section 6(c) of the Educational, Scientific andCultural Materials Importation Act of 1966 (Pub. L. 89–651, asamended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), weinvite comments on the question of whether instruments ofequivalent scientific value, for the purposes for which theinstruments shown below are intended to be used, are beingmanufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of theregulations and be filed within 20 days with the Statutory ImportPrograms Staff, U.S. Department of Commerce, Room 2104, 14th and Constitution Avenue NW, Washington, D.C. 20230. Applications may be examined between 8:30 A.M. and 5:00 P.M. in Room 2104, at the above address. Docket Number: 07–070. Applicant: State University of New York at Binghamton, 4400 Vestal Parkway East, Binghamton, NY 13902. Instrument: Scanning Acoustic Microscope. Manufacturer: Klaus Pintsch, Inc., Germany. Intended Use: The instrument is intended to be used as a research tool for professors and graduate student level researchers. The research is to advance the science and engineering behind modern electronics packaging practices and to develop new packaging paradigms. Research is underway in all areas of packaging, solders, board and package construction, chip joining, roll to roll manufacturing and even fabricating active devices on flexible substrates. The instrument provides a nondestructive means to see into VerDate Aug<31>2005 17:31 Dec 14, 2007 Jkt 214001 Dated: December 7, 2007. Faye Robinson, Director, Statutory Import Programs Staff. [FR Doc. E7–24277 Filed 12–14–07; 8:45 am] BILLING CODE 3510–DS–S International Trade Administration Application for Duty–Free Entry of Scientific Instrument Ave., Denver, CO 80218. Instrument: Electron Microscope, Model H–7650. Manufacturer: Hitachi High– Technologies Corporation, Japan. Intended Use: The instrument will be used in the anatomical pathology laboratory to evaluate various human tissues, aiding in diagnostic interpretations. Application accepted by Commissioner of Customs: November 6, 2007. PO 00000 Frm 00016 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE International Trade Administration [C–570–913] Certain New Pneumatic Off-the-Road Tires from the People’s Republic of China: Preliminary Affirmative Countervailing Duty Determination Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (the Department) preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain new pneumatic off-the-road tires (OTR tires) from the People’s Republic of China (PRC). For information on the estimated subsidy rates, see the ‘‘Suspension of Liquidation’’ section of this notice. Interested parties are invited to comment on this preliminary determination. See ‘‘Disclosure and Public Comment’’ section below for procedures on filing comments. EFFECTIVE DATE: December 17, 2007. FOR FURTHER INFORMATION CONTACT: Mark Hoadley, Jun Jack Zhao, or Nicholas Czajkowski, AD/CVD Operations, Office 6, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482–3148, (202) 482– 1396, and (202) 482–1395, respectively. SUPPLEMENTARY INFORMATION: AGENCY: Case History The following events have occurred since the publication of the Department’s notice of initiation in the Federal Register. See Certain New Pneumatic Off-the-Road Tires From the People’s Republic of China: Initiation of Countervailing Duty Investigation, 72 FR E:\FR\FM\17DEN1.SGM 17DEN1

Agencies

[Federal Register Volume 72, Number 241 (Monday, December 17, 2007)]
[Notices]
[Page 71360]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-24277]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Applications for Duty-Free Entry of Scientific Instruments

    Pursuant to Section 6(c) of the Educational, Scientific andCultural 
Materials Importation Act of 1966 (Pub. L. 89-651, asamended by Pub. L. 
106-36; 80 Stat. 897; 15 CFR part 301), we invite comments on the 
question of whether instruments of equivalent scientific value, for the 
purposes for which the instruments shown below are intended to be used, 
are being manufactured in the United States.
    Comments must comply with 15 CFR 301.5(a)(3) and (4) of the 
regulations and be postmarked on or before January 7, 2008. Address 
written comments to Statutory Import Programs Staff, Room 2104, U.S. 
Department of Commerce, Washington, D.C. 20230. Applications may be 
examined between 8:30 A.M. and 5:00 P.M. at the U.S. Department of 
Commerce in Room 2104.
    Docket Number: 07-068. Applicant: University of Utah, 201 S. 
President's Circle, Salt Lake City, UT 84112. Instrument: Electron 
Microscope, Model Nova NanoSEM 430. Manufacturer: FEI Company, Czech 
Republic. Intended Use: The instrument is intended to be used for the 
imaging of nanoparticles as well as chemical characterization of a wide 
variety of materials. The instrument will also be used to measure the 
size and chemical composition of nanoparticles and nanostructures and 
to create nanostructures using electron beam lithography. The 
objectives of the experiments will be to characterize the size and 
shapes of nanoparticles, nantubes and nanowires and determine the 
chemical composition of clays and other mineralogical samples. 
Application accepted by Commissioner of Customs: November 13, 2007.
    Docket Number: 07-069. Applicant: The Children's Hospital, 1056 E. 
19th Ave., Denver, CO 80218. Instrument: Electron Microscope, Model H-
7650. Manufacturer: Hitachi High-Technologies Corporation, Japan. 
Intended Use: The instrument will be used in the anatomical pathology 
laboratory to evaluate various human tissues, aiding in diagnostic 
interpretations. Application accepted by Commissioner of Customs: 
November 6, 2007.

    Dated: December 7, 2007.
Faye Robinson,
Director, Statutory Import Programs Staff.
[FR Doc. E7-24277 Filed 12-14-07; 8:45 am]
BILLING CODE 3510-DS-S

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.