Mitchel Manufacturing, a Division of Quaker Lace, Honea Path, SC; Mitchel Manufacturing, a Division of Quaker Lace Showroom/Sales Office, New York, NY; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 31613 [E7-11027]
Download as PDF
Federal Register / Vol. 72, No. 109 / Thursday, June 7, 2007 / Notices
Notice of Negative Determination
Regarding Eligibility to Apply for
Worker Adjustment Assistance
applicable to workers and former
workers of the subject firm. The
Department’s negative determination
was issued on March 30, 2007. The
Department’s Notice of determination
was published in the Federal Register
on April 10, 2007 (72 FR 17938).
Workers provided administrative
support to various affiliated facilities.
The initial investigation found that a
majority of the administrative work
done by the petitioning worker groups
is not directed toward support of
production taking place at certified
affiliated production facilities and that a
preponderance of the separations are the
result of the subject firm’s decision to
outsource positions outside of the
corporation.
The negative determination stated
that worker separations are not caused
by imports but by the subject firm’s
decision to outsource administrative
support positions, and stated that the
separations cannot be directly attributed
to imports or a shift in production of an
article.
In the request for reconsideration,
counsel alleged that the petitioning
worker groups either had a ‘‘direct link
to’’ or directly supported production at
affiliated certified production facilities.
The Department has carefully
reviewed the request for reconsideration
and has determined that further
investigation is appropriate.
Employment and Training
Administration
[TA–W–60,962 and TA–W–60,962A]
Mitchel Manufacturing, a Division of
Quaker Lace, Honea Path, SC; Mitchel
Manufacturing, a Division of Quaker
Lace Showroom/Sales Office, New
York, NY; Amended Certification
Regarding Eligibility To Apply for
Worker Adjustment Assistance and
Alternative Trade Adjustment
Assistance
2009, are eligible to apply for adjustment
assistance under Section 223 of the Trade Act
of 1974 and are also eligible to apply for
alternative trade adjustment assistance under
Section 246 of the Trade Act of 1974.
Signed at Washington, DC this 25th day of
May 2007.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E7–11027 Filed 6–6–07; 8:45 am]
BILLING CODE 4510–FN–P
DEPARTMENT OF LABOR
After careful review of the
application, I conclude that the claim is
of sufficient weight to justify
reconsideration of the U.S. Department
of Labor’s prior decision. The
application is, therefore, granted.
Signed at Washington, DC, this 29th day of
May 2007.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E7–11025 Filed 6–6–07; 8:45 am]
BILLING CODE 4510–FN–P
VerDate Aug<31>2005
20:59 Jun 06, 2007
Jkt 211001
In accordance with Section 223 of the
Trade Act of 1974 (19 U.S.C. 2273), and
Section 246 of the Trade Act of 1974 (26
U.S.C. 2813), as amended, the
Department of Labor issued a
Certification Regarding Eligibility to
Apply for Worker Adjustment
Assistance and Alternative Trade
Adjustment Assistance on February 23,
2007, applicable to workers of Mitchel
Manufacturing, a division of Quaker
Lace, Honea Path, South Carolina. The
notice was published in the Federal
Register on March 8, 2007 (72 FR
10561).
At the request of the State agency, the
Department reviewed the certification
for workers of the subject firm. The
workers are engaged in the production
of lace curtains and tablecloths.
New information shows that a worker
separation occurred at the Showroom/
Sales Office, New York, New York
facility of the subject firm. The New
York, New York location served as the
showroom/sales office for the subject
firms’ production facility in Honea Path,
South Carolina.
Based on these findings, the
Department is amending the
certification to include a worker of the
Showroom/Sales Office, New York, New
York location of Mitchel Manufacturing,
a division of Quaker Lace.
The intent of the Department’s
certification is to include all workers of
Mitchel Manufacturing, a division of
Quaker Lace, Honea Path, South
Carolina and the Showroom/Sales
Office, New York, New York who were
adversely affected by increased
company imports.
The amended notice applicable to
TA–W–60,962 is hereby issued as
follows:
Employment and Training
Administration
All workers of Mitchel Manufacturing, a
division of Quaker Lace Honea Path, South
Carolina (TA–W–60,962) and Mitchel
Manufacturing, a division of Quaker Lace,
Showroom/Sales Office, New York, New
York (TA–W–60,962A), who became totally
or partially separated from employment on or
after February 6, 2006, through February 23,
Conclusion
rwilkins on PROD1PC63 with NOTICES
DEPARTMENT OF LABOR
31613
Signed at Washington, DC, this 25th of
May, 2007.
Elliott S. Kushner,
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. E7–11029 Filed 6–6–07; 8:45 am]
PO 00000
Frm 00065
Fmt 4703
Sfmt 4703
[TA–W–61,129]
Romar Textile Co., Inc., Wampum, PA;
Notice of Affirmative Determination
Regarding Application for
Reconsideration
By application postmarked April 16,
2007, a company official requested
administrative reconsideration of the
Department of Labor’s Notice of
Negative Determination Regarding
Eligibility to Apply for Worker
Adjustment Assistance, applicable to
workers and former workers of the
subject firm. The determination was
issued on March 29, 2007 and published
in the Federal Register on April 10,
2007 (72 FR 17938).
The initial investigation resulted in a
negative determination based on the
finding that workers of the subject firm
do not produce an article or support
production of an article within the
meaning of Section 222 of the Act.
The Department reviewed the request
for reconsideration and has determined
that the petitioner has provided
additional information. Therefore, the
Department will conduct further
investigation to determine if the workers
meet the eligibility requirements of the
Trade Act of 1974.
Conclusion
After careful review of the
application, I conclude that the claim is
of sufficient weight to justify
reconsideration of the Department of
Labor’s prior decision. The application
is, therefore, granted.
BILLING CODE 4510–FN–P
E:\FR\FM\07JNN1.SGM
07JNN1
Agencies
[Federal Register Volume 72, Number 109 (Thursday, June 7, 2007)]
[Notices]
[Page 31613]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E7-11027]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
[TA-W-60,962 and TA-W-60,962A]
Mitchel Manufacturing, a Division of Quaker Lace, Honea Path, SC;
Mitchel Manufacturing, a Division of Quaker Lace Showroom/Sales Office,
New York, NY; Amended Certification Regarding Eligibility To Apply for
Worker Adjustment Assistance and Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C.
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as
amended, the Department of Labor issued a Certification Regarding
Eligibility to Apply for Worker Adjustment Assistance and Alternative
Trade Adjustment Assistance on February 23, 2007, applicable to workers
of Mitchel Manufacturing, a division of Quaker Lace, Honea Path, South
Carolina. The notice was published in the Federal Register on March 8,
2007 (72 FR 10561).
At the request of the State agency, the Department reviewed the
certification for workers of the subject firm. The workers are engaged
in the production of lace curtains and tablecloths.
New information shows that a worker separation occurred at the
Showroom/Sales Office, New York, New York facility of the subject firm.
The New York, New York location served as the showroom/sales office for
the subject firms' production facility in Honea Path, South Carolina.
Based on these findings, the Department is amending the
certification to include a worker of the Showroom/Sales Office, New
York, New York location of Mitchel Manufacturing, a division of Quaker
Lace.
The intent of the Department's certification is to include all
workers of Mitchel Manufacturing, a division of Quaker Lace, Honea
Path, South Carolina and the Showroom/Sales Office, New York, New York
who were adversely affected by increased company imports.
The amended notice applicable to TA-W-60,962 is hereby issued as
follows:
All workers of Mitchel Manufacturing, a division of Quaker Lace
Honea Path, South Carolina (TA-W-60,962) and Mitchel Manufacturing,
a division of Quaker Lace, Showroom/Sales Office, New York, New York
(TA-W-60,962A), who became totally or partially separated from
employment on or after February 6, 2006, through February 23, 2009,
are eligible to apply for adjustment assistance under Section 223 of
the Trade Act of 1974 and are also eligible to apply for alternative
trade adjustment assistance under Section 246 of the Trade Act of
1974.
Signed at Washington, DC this 25th day of May 2007.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E7-11027 Filed 6-6-07; 8:45 am]
BILLING CODE 4510-FN-P