Final Results of Full Sunset Review: Cut-to-Length Carbon Steel Plate From Sweden, 58587 [E6-16392]

Download as PDF Federal Register / Vol. 71, No. 192 / Wednesday, October 4, 2006 / Notices judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. We are issuing and publishing this determination and notice in accordance with sections 751(c), 752, and 777(i) of the Act. Dated: September 27, 2006. James C. Leonard III, Acting Assistant Secretary for Import Administration. [FR Doc. E6–16390 Filed 10–3–06; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE International Trade Administration [C–401–804] Final Results of Full Sunset Review: Cut-to-Length Carbon Steel Plate From Sweden Import Administration, International Trade Administration, U.S. Department of Commerce. SUMMARY: On July 19, 2006, the Department of Commerce (the Department) published in the Federal Register the preliminary results of the full sunset review of the countervailing duty (CVD) order on cut-to-length carbon steel plate from Sweden, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). As a result of our analysis, the Department preliminarily found that revocation of the CVD order would be likely to lead to the continuation or recurrence of a countervailable subsidy. We provided interested parties an opportunity to comment on our preliminary results. However, we received no comments from interested parties. As a result, the final results remain the same as the preliminary results of this review. EFFECTIVE DATE: October 4, 2006. FOR FURTHER INFORMATION CONTACT: Jacqueline Arrowsmith or Gene Calvert, AD/CVD Operations, Office 6, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street & Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482–5255 or (202) 482– 3586, respectively. SUPPLEMENTARY INFORMATION: On July 19, 2006, the Department published in the Federal Register the preliminary results of the full sunset review of the CVD order on cut-to-length carbon steel plate from Sweden. See Preliminary Results of Full Sunset Review: Cut-toLength Carbon Steel Plate From Sweden, 71 FR 40992 (July 19, 2006) rwilkins on PROD1PC63 with NOTICES AGENCY: VerDate Aug<31>2005 14:45 Oct 03, 2006 Jkt 211001 (Preliminary Results). No interested parties filed case briefs in response to the Department’s invitation to comment on the Preliminary Results. Scope of the Order The merchandise subject to the CVD order is certain cut-to-length carbon steel plate. These products include hotrolled carbon steel universal mill plates (i.e., flat-rolled products on four faces or in a closed box pass, of a width exceeding 150 millimeters but not exceeding 1,250 millimeters, and of a thickness of not less than 4 millimeters, not in coils and without patterns in relief), of rectangular shape, neither clad, plated nor coated with metal, whether or not painted, varnished, or coated with plastics or other nonmetallic substances; and certain hotrolled carbon steel flat-rolled products in straight lengths, of rectangular shape, hot rolled, neither clad, plated, nor coated with plastics or other nonmetallic substances, 4.75 millimeters or more in thickness and a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the United States Harmonized Tariff Schedule (HTS) under item numbers 7208.31.0000, 7208.32.0000, 7208.33.1000, 7208.33.5000, 7208.41.0000, 7208.42.0000, 7208.43.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.11.0000, 7211.12.0000, 7211.21.0000, 7211.22.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, and 7212.50.0000. Included are flat-rolled products of nonrectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been ‘‘worked after rolling’’)—for example, products which have been bevelled or rounded at the edges. Excluded from this review is grade X– 70 plate. The HTS item numbers are provided for convenience and customs purposes. The written description remains dispositive. Final Results of Review As stated in the Preliminary Results, the Department determined that revocation of the CVD order would be likely to lead to continuation or recurrence of a countervailable subsidy. In addition, we preliminarily determined that the rate likely to prevail is de minimis. As we did not receive any comments from any interested parties regarding the Preliminary Results, we have no reason to reconsider our preliminary decision. PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 58587 International Trade Commission (ITC) Notification In accordance with section 752(b)(3) of the Act, we will notify the ITC of the final results of this full sunset review. Administrative Protective Orders This notice also serves as the only reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR § 351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation that is subject to sanction. We are issuing and publishing these final results and this notice of sunset review in accordance with sections 751(c), 752, and 777(i)(1) of the Act. Dated: September 27, 2006. James C. Leonard, III, Acting Assistant Secretary for Import Administration. [FR Doc. E6–16392 Filed 10–3–06; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration C–412–815 Cut-to-Length Carbon Steel Plate from the United Kingdom: Final Results of Full Sunset Review Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On November 1, 2005, the Department of Commerce (Department) initiated a sunset review of the countervailing duty (CVD) order on cut– to-length carbon steel plate (CTL plate) from the United Kingdom, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). On the basis of a notice of intent to participate and an adequate substantive response filed on behalf of the domestic interested parties and an adequate response from respondent interested parties, the Department determined to conduct a full sunset review of this CVD order pursuant to section 751(c) of the Act and 19 CFR 351.218(e)(2). On July 19, 2006, the Department published the preliminary results of this review and invited interested parties to comment on those results. See Preliminary Results of Full Sunset Review: Cut–to-Length Carbon Steel Plate From the United AGENCY: E:\FR\FM\04OCN1.SGM 04OCN1

Agencies

[Federal Register Volume 71, Number 192 (Wednesday, October 4, 2006)]
[Notices]
[Page 58587]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-16392]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-401-804]


Final Results of Full Sunset Review: Cut-to-Length Carbon Steel 
Plate From Sweden

AGENCY: Import Administration, International Trade Administration, U.S. 
Department of Commerce.
SUMMARY: On July 19, 2006, the Department of Commerce (the Department) 
published in the Federal Register the preliminary results of the full 
sunset review of the countervailing duty (CVD) order on cut-to-length 
carbon steel plate from Sweden, pursuant to section 751(c) of the 
Tariff Act of 1930, as amended (the Act). As a result of our analysis, 
the Department preliminarily found that revocation of the CVD order 
would be likely to lead to the continuation or recurrence of a 
countervailable subsidy.
    We provided interested parties an opportunity to comment on our 
preliminary results. However, we received no comments from interested 
parties. As a result, the final results remain the same as the 
preliminary results of this review.

EFFECTIVE DATE: October 4, 2006.

FOR FURTHER INFORMATION CONTACT: Jacqueline Arrowsmith or Gene Calvert, 
AD/CVD Operations, Office 6, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street & Constitution 
Avenue, NW., Washington, DC 20230; telephone: (202) 482-5255 or (202) 
482-3586, respectively.

SUPPLEMENTARY INFORMATION: On July 19, 2006, the Department published 
in the Federal Register the preliminary results of the full sunset 
review of the CVD order on cut-to-length carbon steel plate from 
Sweden. See Preliminary Results of Full Sunset Review: Cut-to-Length 
Carbon Steel Plate From Sweden, 71 FR 40992 (July 19, 2006) 
(Preliminary Results). No interested parties filed case briefs in 
response to the Department's invitation to comment on the Preliminary 
Results.

Scope of the Order

    The merchandise subject to the CVD order is certain cut-to-length 
carbon steel plate. These products include hot-rolled carbon steel 
universal mill plates (i.e., flat-rolled products on four faces or in a 
closed box pass, of a width exceeding 150 millimeters but not exceeding 
1,250 millimeters, and of a thickness of not less than 4 millimeters, 
not in coils and without patterns in relief), of rectangular shape, 
neither clad, plated nor coated with metal, whether or not painted, 
varnished, or coated with plastics or other nonmetallic substances; and 
certain hot-rolled carbon steel flat-rolled products in straight 
lengths, of rectangular shape, hot rolled, neither clad, plated, nor 
coated with plastics or other nonmetallic substances, 4.75 millimeters 
or more in thickness and a width which exceeds 150 millimeters and 
measures at least twice the thickness, as currently classifiable in the 
United States Harmonized Tariff Schedule (HTS) under item numbers 
7208.31.0000, 7208.32.0000, 7208.33.1000, 7208.33.5000, 7208.41.0000, 
7208.42.0000, 7208.43.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 
7211.11.0000, 7211.12.0000, 7211.21.0000, 7211.22.0045, 7211.90.0000, 
7212.40.1000, 7212.40.5000, and 7212.50.0000. Included are flat-rolled 
products of non-rectangular cross-section where such cross-section is 
achieved subsequent to the rolling process (i.e., products which have 
been ``worked after rolling'')--for example, products which have been 
bevelled or rounded at the edges. Excluded from this review is grade X-
70 plate. The HTS item numbers are provided for convenience and customs 
purposes. The written description remains dispositive.

Final Results of Review

    As stated in the Preliminary Results, the Department determined 
that revocation of the CVD order would be likely to lead to 
continuation or recurrence of a countervailable subsidy. In addition, 
we preliminarily determined that the rate likely to prevail is de 
minimis. As we did not receive any comments from any interested parties 
regarding the Preliminary Results, we have no reason to reconsider our 
preliminary decision.

International Trade Commission (ITC) Notification

    In accordance with section 752(b)(3) of the Act, we will notify the 
ITC of the final results of this full sunset review.

Administrative Protective Orders

    This notice also serves as the only reminder to parties subject to 
administrative protective orders (APO) of their responsibility 
concerning the return or destruction of proprietary information 
disclosed under APO in accordance with 19 CFR Sec.  351.305. Timely 
notification of the return or destruction of APO materials or 
conversion to judicial protective order is hereby requested. Failure to 
comply with the regulations and terms of an APO is a violation that is 
subject to sanction.
    We are issuing and publishing these final results and this notice 
of sunset review in accordance with sections 751(c), 752, and 777(i)(1) 
of the Act.

    Dated: September 27, 2006.
James C. Leonard, III,
Acting Assistant Secretary for Import Administration.
[FR Doc. E6-16392 Filed 10-3-06; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.