Stainless Steel Butt-Weld Pipe Fittings From Malaysia: Notice of Rescission of Antidumping Duty Administrative Review, 41205-41206 [E6-11551]

Download as PDF 41205 Federal Register / Vol. 71, No. 139 / Thursday, July 20, 2006 / Notices In the chart below, please provide the total quantity and total value of all your sales of merchandise covered by the scope of this investigation (see scope section of this notice), produced in the PRC, and exported/shipped to the Market Total Quantity United States during the period October 1, 2005, through March 31, 2006. Terms of Sale Total Value United States. . 1. Export Price Sales. 2.. a. Exporter name. b. Address. c. Contact. d. Phone No.. e. Fax No.. 3. Constructed Export Price Sales. 4. Further Manufactured. Total Sales. Total Quantity: • Please report quantity on a metric ton basis. If any conversions were used, please provide the conversion formula and source. Terms of Sales: • Please report all sales on the same terms (e.g., free on board). Total Value: • All sales values should be reported in U.S. dollars. Please indicate any exchange rates used and their respective dates and sources. Export Price Sales: • Generally, a U.S. sale is classified as an export price sale when the first sale to an unaffiliated person occurs before importation into the United States. • Please include any sales exported by your company directly to the United States. • Please include any sales exported by your company to a third–country market economy reseller where you had knowledge that the merchandise was destined to be resold to the United States. • If you are a producer of subject merchandise, please include any sales manufactured by your company that were subsequently exported by an affiliated exporter to the United States. • Please do not include any sales of merchandise manufactured in Hong Kong in your figures. constructed export price applies even if the sale occurs prior to importation. (A–557–809) Import Administration, International Trade Administration, Department of Commerce. EFFECTIVE DATE: July 20, 2006. FOR FURTHER INFORMATION CONTACT: Maisha Cryor or Mark Manning, AD/ CVD Operations, Office 4, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482–5831 or (202) 482– 5253, respectively. SUPPLEMENTARY INFORMATION: Further Manufactured: Background • Further manufacture or assembly costs include amounts incurred for direct materials, labor and overhead, plus amounts for general and administrative expense, interest expense, and additional packing expense incurred in the country of further manufacture, as well as all costs involved in moving the product from the U.S. port of entry to the further manufacturer. On February 1, 2006, the Department of Commerce (the Department) published in the Federal Register a notice of ‘‘Opportunity To Request Administrative Review’’ of the antidumping duty order on stainless steel butt–weld pipe fittings from Malaysia for the period February 1, 2005, through January 31, 2006. See Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 71 FR 5239 (February 1, 2006). On February 28, 2006, Sapura–Schulz Hydroforming Sdn. Bhd. (Sapura–Schulz), requested an administrative review of its sales for the above–mentioned period. On February 28, 2006, the petitioners1 [FR Doc. E6–11547 Filed 7–19–06; 8:45 am] rwilkins on PROD1PC63 with NOTICES_1 BILLING CODE 3510–DS–S 20:14 Jul 19, 2006 Jkt 208001 International Trade Administration • Please include any sales exported by your company directly to the United States. • Please include any sales exported by your company to a third–country market economy reseller where you had knowledge that the merchandise was destined to be resold to the United States. • If you are a producer of subject merchandise, please include any sales manufactured by your company that were subsequently exported by an affiliated exporter to the United States. • Please do not include any sales of merchandise manufactured in Hong Kong in your figures. Constructed Export Price Sales: Generally, a U.S. sales is classified as a constructed export price sale when the first sale to an unaffiliated person occurs after importation. However, if the first sale to the unaffiliated person is made by a person in the United States affiliated with the foreign exporter, VerDate Aug<31>2005 DEPARTMENT OF COMMERCE PO 00000 Stainless Steel Butt–Weld Pipe Fittings From Malaysia: Notice of Rescission of Antidumping Duty Administrative Review AGENCY: 1 The petitioners in this segment of the proceeding are: Flowline Division of Markovitz Enterprises, Inc.; Gerlin, Inc.; Shaw Alloy Piping Continued Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\20JYN1.SGM 20JYN1 41206 Federal Register / Vol. 71, No. 139 / Thursday, July 20, 2006 / Notices requested an administrative review of the sales for the above–mentioned period made by Kanzen Tetsu Sdn. Bhd. (Kanzen) and Sapura–Schulz. On April 5, 2006, the Department published a notice of initiation of an administrative review of the antidumping duty order on stainless steel butt–weld pipe fittings from Malaysia with respect to Sapura– Schulz and Kanzen. See Initiation of Antidumping and Countervailing Duty Administrative Reviews and Deferral of Administrative Reviews, 71 FR 25145 (April 5, 2006). rwilkins on PROD1PC63 with NOTICES_1 Rescission of Review On June 19, 2006, Sapura–Schulz and the petitioners simultaneously withdrew their requests for an administrative review of the sales made by Sapura–Schulz during the above– referenced period. Consequently, the Department partially rescinded the review with respect to Sapura–Schulz. See Stainless Steel Butt–Weld Pipe Fittings From Malaysia: Notice of Partial Rescission of Antidumping Duty Administrative Review, 71 FR 34304 (July 12, 2006). On July 5, 2006, the petitioners withdrew their request for an administrative review of sales made by Kanzen. Section 351.213(d)(1) of the Department’s regulations requires that the Secretary rescind an administrative review if a party requesting a review withdraws the request within 90 days of the date of publication of the notice of initiation. In this case, the petitioners have withdrawn their request for a review of Kanzen within the 90-day period. We have received no other submissions regarding the withdrawals of the requests for review. Therefore, we are rescinding this review of the antidumping duty order on stainless steel butt–weld pipe fittings from Malaysia. Assessment The Department will instruct U.S. Customs and Border Protection (CBP) to assess antidumping duties on all appropriate entries. For those companies for which this review is rescinded, antidumping duties shall be assessed at rates equal to the cash deposit of estimated antidumping duties required at the time of entry, or withdrawal from warehouse, for consumption, in accordance with 19 CFR 351.212(c)(1)(i). The Department will issue appropriate assessment instructions directly to CBP within 15 days of publication of this notice. products, Inc.; and Taylor Forge Stainless, Inc. (collectively, the petitioners). VerDate Aug<31>2005 21:03 Jul 19, 2006 Jkt 208001 Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary’s presumption that reimbursement of antidumping duties occurred and subsequent assessment of double antidumping duties. This notice serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation. This notice is published in accordance with section 751 of the Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4). Dated: July 14, 2006. Stephen J. Claeys, Deputy Assistant Secretary for Import Administration. [FR Doc. E6–11551 Filed 7–19–06; 8:45 am] BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [I.D. 051106A] Endangered and Threatened Species: Extension of Public Comment Period on Draft Steller Sea Lion Recovery Plan National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of Availability; extension of public comment period. AGENCY: SUMMARY: In May 2006, the National Marine Fisheries Service (NMFS) announced the availability for public review of the draft revised recovery plan (plan) for the western and eastern distinct population segments (DPS) of Steller sea lion (Eumetopias jubatus). NMFS is extending the public comment period on the recovery plan until September 1, 2006. PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 Comments on the draft recovery plan must be received by close of business on September 1, 2006. ADDRESSES: Send comments to Kaja Brix, Assistant Regional Administrator, Protected Resources Division, Alaska Region, NMFS, Attn: Ellen Walsh, P.O. Box 21668, Juneau, AK 99802. Comments may also be submitted by (1) E-mail to SSLRP@noaa.gov. Include in the subject line the following document identifier: Sea Lion Recovery Plan. Email comments, with or without attachments, are limited to 5 megabytes; (2) hand delivery to the Federal Building: 709 W. 9th Street, Juneau, AK; or (3) Facsimile (fax) to 907-586-7012. Interested persons may obtain the plan for review from the above address or online from the NMFS Alaska Region website: http://www.fakr.noaa.gov/. FOR FURTHER INFORMATION CONTACT: Shane Capron at 907-271-6620, e-mail shane.capron@noaa.gov; or Kaja Brix at 907-586-7235, e-mail kaja.brix@noaa.gov. SUPPLEMENTARY INFORMATION: DATES: Background On May 24, 2006, NMFS published a notice of availability (NOA) of the plan for the western and eastern DPSs of Steller sea lions (71 FR 29919). The plan contains (1) A comprehensive review of Steller sea lion status and ecology, (2) a review of previous conservation actions, (3) a threats assessment, (4) biological and recovery criteria for downlisting and delisting, (5) actions necessary for the recovery of the species, and (6) estimates of time and cost to recovery. With the publication of the NOA, NMFS announced a 60-day public comment period ending on July 24, 2006. NMFS has received a request by the North Pacific Fishery Management Council (Council) to extend the public comment period so that its Science and Statistical Committee (SSC) can fully review and provide comments on the plan. Due to the size and scope of the plan, the SSC will not be able to provide its comments to the Council until late August. The Council will then be able to finalize the comments and provide them to NMFS by September 1. Comments from the SSC and Council will be valuable to the recovery planning process especially with regard to the threats assessment and the development of recovery criteria. In this notice NMFS is extending the public comment period until September 1, 2006, in order to allow adequate time for the SSC and others to thoroughly review and thoughtfully comment on the plan. Authority: 16 U.S.C. 1531 et seq. E:\FR\FM\20JYN1.SGM 20JYN1

Agencies

[Federal Register Volume 71, Number 139 (Thursday, July 20, 2006)]
[Notices]
[Pages 41205-41206]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-11551]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

(A-557-809)


Stainless Steel Butt-Weld Pipe Fittings From Malaysia: Notice of 
Rescission of Antidumping Duty Administrative Review

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

EFFECTIVE DATE: July 20, 2006.

FOR FURTHER INFORMATION CONTACT: Maisha Cryor or Mark Manning, AD/CVD 
Operations, Office 4, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-
5831 or (202) 482-5253, respectively.

SUPPLEMENTARY INFORMATION:

Background

    On February 1, 2006, the Department of Commerce (the Department) 
published in the Federal Register a notice of ``Opportunity To Request 
Administrative Review'' of the antidumping duty order on stainless 
steel butt-weld pipe fittings from Malaysia for the period February 1, 
2005, through January 31, 2006. See Antidumping or Countervailing Duty 
Order, Finding, or Suspended Investigation; Opportunity To Request 
Administrative Review, 71 FR 5239 (February 1, 2006). On February 28, 
2006, Sapura-Schulz Hydroforming Sdn. Bhd. (Sapura-Schulz), requested 
an administrative review of its sales for the above-mentioned period. 
On February 28, 2006, the petitioners\1\

[[Page 41206]]

requested an administrative review of the sales for the above-mentioned 
period made by Kanzen Tetsu Sdn. Bhd. (Kanzen) and Sapura-Schulz. On 
April 5, 2006, the Department published a notice of initiation of an 
administrative review of the antidumping duty order on stainless steel 
butt-weld pipe fittings from Malaysia with respect to Sapura-Schulz and 
Kanzen. See Initiation of Antidumping and Countervailing Duty 
Administrative Reviews and Deferral of Administrative Reviews, 71 FR 
25145 (April 5, 2006).
---------------------------------------------------------------------------

    \1\ The petitioners in this segment of the proceeding are: 
Flowline Division of Markovitz Enterprises, Inc.; Gerlin, Inc.; Shaw 
Alloy Piping products, Inc.; and Taylor Forge Stainless, Inc. 
(collectively, the petitioners).
---------------------------------------------------------------------------

Rescission of Review

    On June 19, 2006, Sapura-Schulz and the petitioners simultaneously 
withdrew their requests for an administrative review of the sales made 
by Sapura-Schulz during the above-referenced period. Consequently, the 
Department partially rescinded the review with respect to Sapura-
Schulz. See Stainless Steel Butt-Weld Pipe Fittings From Malaysia: 
Notice of Partial Rescission of Antidumping Duty Administrative Review, 
71 FR 34304 (July 12, 2006).
    On July 5, 2006, the petitioners withdrew their request for an 
administrative review of sales made by Kanzen. Section 351.213(d)(1) of 
the Department's regulations requires that the Secretary rescind an 
administrative review if a party requesting a review withdraws the 
request within 90 days of the date of publication of the notice of 
initiation. In this case, the petitioners have withdrawn their request 
for a review of Kanzen within the 90-day period. We have received no 
other submissions regarding the withdrawals of the requests for review. 
Therefore, we are rescinding this review of the antidumping duty order 
on stainless steel butt-weld pipe fittings from Malaysia.

Assessment

    The Department will instruct U.S. Customs and Border Protection 
(CBP) to assess antidumping duties on all appropriate entries. For 
those companies for which this review is rescinded, antidumping duties 
shall be assessed at rates equal to the cash deposit of estimated 
antidumping duties required at the time of entry, or withdrawal from 
warehouse, for consumption, in accordance with 19 CFR 351.212(c)(1)(i).
    The Department will issue appropriate assessment instructions 
directly to CBP within 15 days of publication of this notice.

Notification to Importers

    This notice serves as a final reminder to importers of their 
responsibility under 19 CFR 351.402(f) to file a certificate regarding 
the reimbursement of antidumping duties prior to liquidation of the 
relevant entries during this review period. Failure to comply with this 
requirement could result in the Secretary's presumption that 
reimbursement of antidumping duties occurred and subsequent assessment 
of double antidumping duties.
    This notice serves as a reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely written 
notification of the return or destruction of APO materials or 
conversion to judicial protective order is hereby requested. Failure to 
comply with the regulations and terms of an APO is a sanctionable 
violation.
    This notice is published in accordance with section 751 of the 
Tariff Act of 1930, as amended, and 19 CFR 351.213(d)(4).

    Dated: July 14, 2006.
Stephen J. Claeys,
Deputy Assistant Secretary for Import Administration.
[FR Doc. E6-11551 Filed 7-19-06; 8:45 am]
BILLING CODE 3510-DS-S