Notice of Amended Final Determination of Sales at Less Than Fair Value: Diamond Sawblades and Parts Thereof from the People's Republic of China, 35864-35865 [E6-9874]
Download as PDF
<![CDATA[
35864
Federal Register / Vol. 71, No. 120 / Thursday, June 22, 2006 / Notices
Washington, DC 20230 (or via the
Internet at dHynek@doc.gov).
FOR FURTHER INFORMATION CONTACT:
Requests for additional information or
copies of the information collection
instrument(s) and instructions should
be directed to Jennifer Croft, 202–482–
8187, or jcroft@doc.gov.
SUPPLEMENTARY INFORMATION:
I. Abstract
Under the Rehabilitation Act of 1973,
Federal agencies must provide
reasonable accommodation to qualified
applicants with disabilities, unless to do
so would cause undue hardship.
Executive Order 13164 requires
Federal agencies to provide written
procedures for reasonable
accommodation for applicants. In order
to evaluate and ensure that the process
and requests for reasonable
accommodation are done in a fair,
timely, and equitable manner,
applicants are required to verify their
request in writing by using a form (CD–
575). The form is also used for internal
data tracking regarding the number and
types of reasonable accommodations
requested and granted (or denied). This
information is required by the Equal
Employment Opportunities Commission
to be compiled and analyzed on an
annual basis.
II. Method of Collection
The information will be collected in
paper or electronic format.
wwhite on PROD1PC61 with NOTICES
III. Data
OMB Number: 0690–0022.
Form Number: CD 575.
Type of Review: Regular submission.
Affected Public: Individuals or
households.
Estimated Number of Respondents:
10.
Estimated Time per Response: 30
minutes.
Estimated Total Annual Burden
Hours: 5 hours.
Estimated Total Annual Cost to
Public: $0.
IV. Request for Comments
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden
(including hours and cost) of the
proposed collection of information; (c)
ways to enhance the quality, utility, and
clarity of the information to be
collected; and (d) ways to minimize the
burden of the collection of information
on respondents, including through the
VerDate Aug<31>2005
19:08 Jun 21, 2006
Jkt 208001
use of automated collection techniques
or other forms of information
technology.
Comments submitted in response to
this notice will be summarized and/or
included in the request for OMB
approval of this information collection;
they also will become a matter of public
record.
Dated: June 16, 2006.
Gwellnar Banks,
Management Analyst, Office of the Chief
Information Officer.
[FR Doc. E6–9838 Filed 6–21–06; 8:45 am]
BILLING CODE 3510–BP–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–900]
Notice of Amended Final
Determination of Sales at Less Than
Fair Value: Diamond Sawblades and
Parts Thereof from the People’s
Republic of China
Import Administration,
International Trade Administration,
Department of Commerce.
EFFECTIVE DATE: June 22, 2006.
FOR FURTHER INFORMATION CONTACT:
Anya Naschak or Carrie Blozy, AD/CVD
Operations, Office 9, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue, NW., Washington, DC, 20230;
telephone: (202) 482–6375 or 482–5403,
respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Amendment to the Final Determination
In accordance with sections 735(d)
and 777(i)(1) of the Tariff Act of 1930,
as amended, (‘‘the Act’’), on May 22,
2006, the Department of Commerce
(‘‘the Department’’) published its final
determination of sales at less than fair
value (‘‘LTFV’’). See Final
Determination of Sales at Less Than
Fair Value and Final Partial Affirmative
Determination of Critical
Circumstances: Diamond Sawblades
and Parts Thereof from the People’s
Republic of China, 71 FR 29303
(May 22, 2006) (‘‘Final
Determination’’). See Final
Determination and corresponding Issues
and Decision Memorandum, dated May
15, 2006.
Between May 23, 2006, and May 26,
2006, the following parties filed timely
allegations that the Department made
various clerical errors in the Final
Determination. On May 23, 2006, the
Diamond Sawblade Manufacturers’
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
Coalition (‘‘Petitioner’’) filed a timely
request pursuant to section
351.224(c)(2) of the Department’s
regulations, requesting that the
Department correct alleged ministerial
errors in the Final Determination in the
calculation of a margin for Bosun Tools
Group Co., Ltd. (‘‘Bosun’’) and Beijing
Gang Yan Diamond Product Company
(‘‘BGY’’) (included with Yichang HXF
Circular Saw Industrial Co., Ltd
(‘‘HXF’’) as a single entity, Advanced
Technology & Materials Co., Ltd.
(‘‘AT&M’’) (see Final Determination)).
Also on May 23, 2006, AT&M filed
comments on the Department’s draft
customs instructions. On May 26, 2006,
Hebei Jikai Industrial Group Co. Ltd.
(‘‘Hebei Jikai’’) filed a request that the
Department correct certain clerical
errors with respect to Hebei Jikai. On
May 31, 2006, Petitioner filed comments
rebutting Hebei Jikai’s allegations.
A ministerial error is defined as an
error in addition, subtraction, or other
arithmetic function, clerical error
resulting from inaccurate copying,
duplication, or the like, and any other
similar type of unintentional error
which the Department considers
ministerial. See 19 CFR 351.224(f).
After analyzing all interested party
comments and rebuttals, we have
determined, in accordance with 19 CFR
351.224(e), that we made ministerial
errors in our calculations performed for
the final determination with respect to
Bosun and AT&M. However, the
Department finds that the errors alleged
by Hebei Jikai were not ministerial
errors within the meaning of 19 CFR
351.224(f). For a detailed discussion of
these ministerial errors, as well as the
Department=s analysis, see
Memorandum to James C. Doyle from
Anya Naschak: Antidumping Duty
Investigation of Diamond Sawblades
from the People’s Republic of China:
Analysis of Ministerial Error
Allegations, dated June 15, 2006
(‘‘Ministerial Error I&D Memo’’).
Additionally, in the Final
Determination, we determined that
several companies qualified for a
separate rate. The margin we calculated
in the Final Determination for these
companies, which is the weighted
average of the mandatory respondents’
rates, was 20.72 percent. Because the
rates of the mandatory respondents have
changed since the Final Determination,
we have recalculated the rate for the
separate rate applicants. The new rate is
21.43 percent. See Ministerial Error I&D
Memo at Attachment IV.
In addition, AT&M requested that the
Department make certain changes to the
Department’s draft instructions to U.S.
Customs and Border Protection (‘‘CBP’’).
E:\FR\FM\22JNN1.SGM
22JNN1
35865
Federal Register / Vol. 71, No. 120 / Thursday, June 22, 2006 / Notices
AT&M requested that the Department
modify the language used in the
Department’s customs instructions to
read ‘‘on exports where Cliff (Tianjin)
International, Ltd. acted as the exporter
and facilitator for the AT&M entity,
imports are eligible to claim the
antidumping duty rate’’ for AT&M. See
AT&M’s letter to the Department dated
May 23, 2006. Though this suggestion
does not constitute a ‘‘ministerial’’ error
within the meaning of section 351.224(f)
of the Department’s regulations, the
Department will make the change as
requested by AT&M to ensure that the
Department’s intent is clear to CBP.
Thus, the Department will include
language in the customs module
indicating that exports where Cliff
(Tianjin) International, Ltd. acted as an
exporter and facilitator to AT&M, the
importer is eligible to claim AT&M’s
antidumping duty rate.1
Therefore, in accordance with 19 CFR
351.224(e), we are amending the final
determination of sales at LTFV in the
antidumping duty investigation of
diamond sawblades from the People’s
Republic of China (‘‘PRC’’). The revised
weighted–average dumping margins are
included in the ‘‘Antidumping Duty
Order’’ section, below. For the revisions
to the calculations for all companies, see
Ministerial Error I&D Memo.
Therefore, in accordance with 19 CFR
351.224(e), we are amending the final
determination of sales at LTFV in the
antidumping duty investigation of
diamond sawblades from the PRC. The
revised dumping margins are as follows:
DIAMOND SAWBLADES FROM THE PRC - WEIGHTED–AVERAGE DUMPING MARGINS
Exporter
Advanced Technology & Materials Co., Ltd. .......................
Bosun Tools Group Co., Ltd. ...............................................
Danyang Huachang Diamond Tools Manufacturing Co.,
Ltd. ...................................................................................
Danyang NYCL Tools Manufacturing Co., Ltd. ...................
Danyang Youhe Tool Manufacturer Co., Ltd. .....................
Fujian Quanzhou Wanlong Stone Co., Ltd. ........................
Guilin Tebon Superhard Material Co., Ltd. .........................
Hebei Jikai Industrial Group Co., Ltd. .................................
Huzhou Gu’s Import & Export Co., Ltd. ..............................
Huzhou Gu’s Import & Export Co., Ltd. ..............................
Jiangsu Fengtai Diamond Tool Manufacture Co., Ltd. .......
Jiangyin Likn Industry Co., Ltd. ...........................................
Jiangyin Likn Industry Co., Ltd. ...........................................
Qingdao Shinhan Diamond Industrial Co., Ltd. ...................
Quanzhou Zhongzhi Diamond Tool Co., Ltd. ......................
Rizhao Hein Saw Co., Ltd. ..................................................
Shanghai Deda Industry & Trading Co., Ltd. ......................
Shanghai Robtol Tool Manufacturing Co., Ltd. ...................
Shijiazhuang Global New Century Tools Co., Ltd. ..............
Sichuan Huili Tools Co. .......................................................
Sichuan Huili Tools Co. .......................................................
Weihai Xiangguang Mechanical Industrial Co., Ltd. ...........
Wuhan Wanbang Laser Diamond Tools Co. ......................
Xiamen ZL Diamond Tools Co., Ltd. ...................................
Zhejiang Tea Import & Export Co., Ltd. ..............................
Zhejiang Tea Import & Export Co., Ltd. ..............................
Zhejiang Tea Import & Export Co., Ltd. ..............................
Zhejiang Wanli Tools Group Co., Ltd. .................................
Zhenjiang Inter–China Import & Export Co., Ltd. ................
PRC–Wide Rate ..................................................................
wwhite on PROD1PC61 with NOTICES
Continuation of Suspension of
Liquidation
In accordance with section
735(c)(1)(B) of the Act, we will instruct
CBP to continue to suspend liquidation
of all entries of subject merchandise
from the PRC. We will also instruct CBP
to require cash deposit or the posting of
a bond equal to the estimated amount by
which the normal value exceeds the
U.S. price as indicated in the chart
above. These instructions suspending
liquidation will remain in effect until
further notice.
1 The Department will also include such language
in its cash deposit instructions to CBP.
VerDate Aug<31>2005
19:08 Jun 21, 2006
Jkt 208001
Weighted–Average
Deposit Rate
Producer
Advanced Technology & Materials Co., Ltd.
Bosun Tools Group Co., Ltd.
2 2.82%
Danyang Huachang Diamond Tools Manufacturing Co., Ltd.
Danyang NYCL Tools Manufacturing Co., Ltd.
Danyang Youhe Tool Manufacturer Co., Ltd.
Fujian Quanzhou Wanlong Stone Co., Ltd.
Guilin Tebon Superhard Material Co., Ltd.
Hebei Jikai Industrial Group Co., Ltd.
Danyang Aurui Hardware Products Co., Ltd.
Danyang Huachang Diamond Tools Manufacturing Co., Ltd.
Jiangsu Fengtai Diamond Tool Manufacture Co., Ltd.
Jiangsu Fengtai Diamond Tool Manufacture Co., Ltd.
Wuhan Wanbang Laser Diamond Tools Co.
Qingdao Shinhan Diamond Industrial Co., Ltd.
Quanzhou Zhongzhi Diamond Tool Co., Ltd.
Rizhao Hein Saw Co., Ltd.
Hua Da Superabrasive Tools Technology Co., Ltd.
Shanghai Robtol Tool Manufacturing Co., Ltd.
Shijiazhuang Global New Century Tools Co., Ltd.
Chengdu Huifeng Diamond Tools Co., Ltd.
Sichuan Huili Tools Co.
Weihai Xiangguang Mechanical Industrial Co., Ltd.
Wuhan Wanbang Laser Diamond Tools Co.
Xiamen ZL Diamond Tools Co., Ltd.
Danyang Dida Diamond Tools Manufacturing Co., Ltd.
Danyang Tsunda Diamond Tools Co., Ltd.
Wuxi Lianhua Superhard Material Tools Co., Ltd.
Zhejiang Wanli Super–hard Materials Co., Ltd.
Danyang Weiwang Tools Manufacturing Co., Ltd.
....................................................................................................
21.43%
21.43%
21.43%
21.43%
21.43%
48.50%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
21.43%
164.09%
This determination is issued and
published pursuant to sections 735(d)
and 777(i)(1) of the Act.
DEPARTMENT OF COMMERCE
Dated: June 15, 2006.
David M. Spooner,
Assistant Secretary for Import
Administration.
[FR Doc. E6–9874 Filed 6–21–06; 8:45 am]
35.51%
[A–588–835]
BILLING CODE 3510–DS–S
Frm 00006
Fmt 4703
Oil Country Tubular Goods from
Japan: Notice of Intent to Rescind
Antidumping Duty Administrative
Review
Import Administration,
International Trade Administration,
U.S. Department of Commerce.
SUMMARY: The Department of Commerce
(the Department) is conducting an
AGENCY:
2 Including Beijing Gang Yan Diamond Products
Company as an exporter when merchandise was
also produced by Beijing Gang Yan Diamond
Products Company, and Yichang HXF Circular Saw
PO 00000
International Trade Administration
Sfmt 4703
Industrial Co., Ltd. as an exporter when
merchandise was also produced by Yichang HXF
Circular Saw Industrial Co., Ltd.
E:\FR\FM\22JNN1.SGM
22JNN1
]]>Agencies
[Federal Register Volume 71, Number 120 (Thursday, June 22, 2006)]
[Notices]
[Pages 35864-35865]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-9874]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-900]
Notice of Amended Final Determination of Sales at Less Than Fair
Value: Diamond Sawblades and Parts Thereof from the People's Republic
of China
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
EFFECTIVE DATE: June 22, 2006.
FOR FURTHER INFORMATION CONTACT: Anya Naschak or Carrie Blozy, AD/CVD
Operations, Office 9, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC, 20230; telephone: (202) 482-
6375 or 482-5403, respectively.
SUPPLEMENTARY INFORMATION:
Amendment to the Final Determination
In accordance with sections 735(d) and 777(i)(1) of the Tariff Act
of 1930, as amended, (``the Act''), on May 22, 2006, the Department of
Commerce (``the Department'') published its final determination of
sales at less than fair value (``LTFV''). See Final Determination of
Sales at Less Than Fair Value and Final Partial Affirmative
Determination of Critical Circumstances: Diamond Sawblades and Parts
Thereof from the People's Republic of China, 71 FR 29303
(May 22, 2006) (``Final Determination''). See Final Determination
and corresponding Issues and Decision Memorandum, dated May 15, 2006.
Between May 23, 2006, and May 26, 2006, the following parties filed
timely allegations that the Department made various clerical errors in
the Final Determination. On May 23, 2006, the Diamond Sawblade
Manufacturers' Coalition (``Petitioner'') filed a timely request
pursuant to section 351.224(c)(2) of the Department's regulations,
requesting that the Department correct alleged ministerial errors in
the Final Determination in the calculation of a margin for Bosun Tools
Group Co., Ltd. (``Bosun'') and Beijing Gang Yan Diamond Product
Company (``BGY'') (included with Yichang HXF Circular Saw Industrial
Co., Ltd (``HXF'') as a single entity, Advanced Technology & Materials
Co., Ltd. (``AT&M'') (see Final Determination)). Also on May 23, 2006,
AT&M filed comments on the Department's draft customs instructions. On
May 26, 2006, Hebei Jikai Industrial Group Co. Ltd. (``Hebei Jikai'')
filed a request that the Department correct certain clerical errors
with respect to Hebei Jikai. On May 31, 2006, Petitioner filed comments
rebutting Hebei Jikai's allegations.
A ministerial error is defined as an error in addition,
subtraction, or other arithmetic function, clerical error resulting
from inaccurate copying, duplication, or the like, and any other
similar type of unintentional error which the Department considers
ministerial. See 19 CFR 351.224(f).
After analyzing all interested party comments and rebuttals, we
have determined, in accordance with 19 CFR 351.224(e), that we made
ministerial errors in our calculations performed for the final
determination with respect to Bosun and AT&M. However, the Department
finds that the errors alleged by Hebei Jikai were not ministerial
errors within the meaning of 19 CFR 351.224(f). For a detailed
discussion of these ministerial errors, as well as the Department=s
analysis, see Memorandum to James C. Doyle from Anya Naschak:
Antidumping Duty Investigation of Diamond Sawblades from the People's
Republic of China: Analysis of Ministerial Error Allegations, dated
June 15, 2006 (``Ministerial Error I&D Memo''). Additionally, in the
Final Determination, we determined that several companies qualified for
a separate rate. The margin we calculated in the Final Determination
for these companies, which is the weighted average of the mandatory
respondents' rates, was 20.72 percent. Because the rates of the
mandatory respondents have changed since the Final Determination, we
have recalculated the rate for the separate rate applicants. The new
rate is 21.43 percent. See Ministerial Error I&D Memo at Attachment IV.
In addition, AT&M requested that the Department make certain
changes to the Department's draft instructions to U.S. Customs and
Border Protection (``CBP'').
[[Page 35865]]
AT&M requested that the Department modify the language used in the
Department's customs instructions to read ``on exports where Cliff
(Tianjin) International, Ltd. acted as the exporter and facilitator for
the AT&M entity, imports are eligible to claim the antidumping duty
rate'' for AT&M. See AT&M's letter to the Department dated May 23,
2006. Though this suggestion does not constitute a ``ministerial''
error within the meaning of section 351.224(f) of the Department's
regulations, the Department will make the change as requested by AT&M
to ensure that the Department's intent is clear to CBP. Thus, the
Department will include language in the customs module indicating that
exports where Cliff (Tianjin) International, Ltd. acted as an exporter
and facilitator to AT&M, the importer is eligible to claim AT&M's
antidumping duty rate.\1\
---------------------------------------------------------------------------
\1\ The Department will also include such language in its cash
deposit instructions to CBP.
---------------------------------------------------------------------------
Therefore, in accordance with 19 CFR 351.224(e), we are amending
the final determination of sales at LTFV in the antidumping duty
investigation of diamond sawblades from the People's Republic of China
(``PRC''). The revised weighted-average dumping margins are included in
the ``Antidumping Duty Order'' section, below. For the revisions to the
calculations for all companies, see Ministerial Error I&D Memo.
Therefore, in accordance with 19 CFR 351.224(e), we are amending
the final determination of sales at LTFV in the antidumping duty
investigation of diamond sawblades from the PRC. The revised dumping
margins are as follows:
Diamond Sawblades from the PRC - Weighted-average Dumping Margins
----------------------------------------------------------------------------------------------------------------
Weighted-Average
Exporter Producer Deposit Rate
----------------------------------------------------------------------------------------------------------------
Advanced Technology & Materials Advanced Technology & Materials Co., Ltd. \2\ 2.82%
Co., Ltd.........................
Bosun Tools Group Co., Ltd........ Bosun Tools Group Co., Ltd. 35.51%
Danyang Huachang Diamond Tools Danyang Huachang Diamond Tools Manufacturing Co., Ltd. 21.43%
Manufacturing Co., Ltd...........
Danyang NYCL Tools Manufacturing Danyang NYCL Tools Manufacturing Co., Ltd. 21.43%
Co., Ltd.........................
Danyang Youhe Tool Manufacturer Danyang Youhe Tool Manufacturer Co., Ltd. 21.43%
Co., Ltd.........................
Fujian Quanzhou Wanlong Stone Co., Fujian Quanzhou Wanlong Stone Co., Ltd. 21.43%
Ltd..............................
Guilin Tebon Superhard Material Guilin Tebon Superhard Material Co., Ltd. 21.43%
Co., Ltd.........................
Hebei Jikai Industrial Group Co., Hebei Jikai Industrial Group Co., Ltd. 48.50%
Ltd..............................
Huzhou Gu's Import & Export Co., Danyang Aurui Hardware Products Co., Ltd. 21.43%
Ltd..............................
Huzhou Gu's Import & Export Co., Danyang Huachang Diamond Tools Manufacturing Co., Ltd. 21.43%
Ltd..............................
Jiangsu Fengtai Diamond Tool Jiangsu Fengtai Diamond Tool Manufacture Co., Ltd. 21.43%
Manufacture Co., Ltd.............
Jiangyin Likn Industry Co., Ltd... Jiangsu Fengtai Diamond Tool Manufacture Co., Ltd. 21.43%
Jiangyin Likn Industry Co., Ltd... Wuhan Wanbang Laser Diamond Tools Co. 21.43%
Qingdao Shinhan Diamond Industrial Qingdao Shinhan Diamond Industrial Co., Ltd. 21.43%
Co., Ltd.........................
Quanzhou Zhongzhi Diamond Tool Quanzhou Zhongzhi Diamond Tool Co., Ltd. 21.43%
Co., Ltd.........................
Rizhao Hein Saw Co., Ltd.......... Rizhao Hein Saw Co., Ltd. 21.43%
Shanghai Deda Industry & Trading Hua Da Superabrasive Tools Technology Co., Ltd. 21.43%
Co., Ltd.........................
Shanghai Robtol Tool Manufacturing Shanghai Robtol Tool Manufacturing Co., Ltd. 21.43%
Co., Ltd.........................
Shijiazhuang Global New Century Shijiazhuang Global New Century Tools Co., Ltd. 21.43%
Tools Co., Ltd...................
Sichuan Huili Tools Co............ Chengdu Huifeng Diamond Tools Co., Ltd. 21.43%
Sichuan Huili Tools Co............ Sichuan Huili Tools Co. 21.43%
Weihai Xiangguang Mechanical Weihai Xiangguang Mechanical Industrial Co., Ltd. 21.43%
Industrial Co., Ltd..............
Wuhan Wanbang Laser Diamond Tools Wuhan Wanbang Laser Diamond Tools Co. 21.43%
Co...............................
Xiamen ZL Diamond Tools Co., Ltd.. Xiamen ZL Diamond Tools Co., Ltd. 21.43%
Zhejiang Tea Import & Export Co., Danyang Dida Diamond Tools Manufacturing Co., Ltd. 21.43%
Ltd..............................
Zhejiang Tea Import & Export Co., Danyang Tsunda Diamond Tools Co., Ltd. 21.43%
Ltd..............................
Zhejiang Tea Import & Export Co., Wuxi Lianhua Superhard Material Tools Co., Ltd. 21.43%
Ltd..............................
Zhejiang Wanli Tools Group Co., Zhejiang Wanli Super-hard Materials Co., Ltd. 21.43%
Ltd..............................
Zhenjiang Inter-China Import & Danyang Weiwang Tools Manufacturing Co., Ltd. 21.43%
Export Co., Ltd..................
PRC-Wide Rate..................... ........................................................ 164.09%
----------------------------------------------------------------------------------------------------------------
Continuation of Suspension of Liquidation
In accordance with section 735(c)(1)(B) of the Act, we will
instruct CBP to continue to suspend liquidation of all entries of
subject merchandise from the PRC. We will also instruct CBP to require
cash deposit or the posting of a bond equal to the estimated amount by
which the normal value exceeds the U.S. price as indicated in the chart
above. These instructions suspending liquidation will remain in effect
until further notice.
---------------------------------------------------------------------------
\2\ Including Beijing Gang Yan Diamond Products Company as an
exporter when merchandise was also produced by Beijing Gang Yan
Diamond Products Company, and Yichang HXF Circular Saw Industrial
Co., Ltd. as an exporter when merchandise was also produced by
Yichang HXF Circular Saw Industrial Co., Ltd.
---------------------------------------------------------------------------
This determination is issued and published pursuant to sections
735(d) and 777(i)(1) of the Act.
Dated: June 15, 2006.
David M. Spooner,
Assistant Secretary for Import Administration.
[FR Doc. E6-9874 Filed 6-21-06; 8:45 am]
BILLING CODE 3510-DS-S
