The Manufacturing Council: Meeting of The Manufacturing Council, 32044 [E6-8622]

Download as PDF 32044 Federal Register / Vol. 71, No. 106 / Friday, June 2, 2006 / Notices initiation of the scope inquiry.’’ In accordance with section 351.225(l)(2) of the Department’s regulations, we will instruct U.S. Customs and Border Protection (‘‘CBP’’) to suspend liquidation of all entries of mixed–wax candles containing up to 87.80 percent of palm and/or other vegetable oil– based waxes mixed with petroleum wax candles, from the People’s Republic of China that were entered, or withdrawn from warehouse, for consumption on or after February 25, 2005, the date of initiation of this anticircumvention inquiry. See Notice of Affirmative Preliminary Determination of Circumvention of Antidumping Duty Order: Anti–Circumvention Inquiry of the Antidumping Duty Order on Certain Pasta from Italy, 63 FR 18364, 18366 (April 15, 1998); Notice of Affirmative Final Determination of Circumvention of Antidumping Duty Order: Anti– Circumvention Inquiry of the Antidumping Duty Order on Certain Pasta from Italy, 63 FR 54672, 54675– 6 (October 13, 1998). The merchandise subject to suspension of liquidation based on this determination is limited to mixed–wax candles containing up to 87.80 percent of palm and/or other vegetable oil– based waxes mixed with petroleum wax candles. CBP shall require a cash deposit in the amount of 108.30 percent for all such unliquidated entries, which is the most recently calculated PRC– wide rate. See Amended Notice of Final Results of Antidumping Duty Administrative Review: Petroleum Wax Candles from the People’s Republic of China, 69 FR 20858, 20859 (April 19, 2004). This suspension of liquidation will remain in effect until further notice. jlentini on PROD1PC65 with NOTICES International Trade Commission Notification In accordance with section 781(d) of the Act, we have notified the ITC of the proposed inclusion of mixed–wax candles in the antidumping duty order on petroleum wax candles from the PRC. Pursuant to section 781(e)(2) of the Act, the ITC has determined that consultations are not necessary. See May 23, 2006, Additional Information, at Attachment 5. Public Comment The Department will be setting a briefing schedule following the publication of this preliminary determination. Final Determination The final determination will be issued not later than ninety days from the date of publication of this notice. VerDate Aug<31>2005 18:05 Jun 01, 2006 Jkt 208001 This determination is issued and published in accordance with section 781(d) of the Act and section 351.225(j) of the Department’s regulations. Dated: May 23, 2006. David M. Spooner, Assistant Secretaryfor Import Administration. [FR Doc. E6–8629 Filed 6 –1–06; 8:45 am] Dated: May 26, 2006. Sam Giller, Executive Secretary, The Manufacturing Council. [FR Doc. E6–8622 Filed 6–1–06; 8:45 am] BILLING CODE 3510–DR–P DEPARTMENT OF COMMERCE BILLING CODE 3510–DS–S DEPARTMENT OF COMMERCE International Trade Administration The Manufacturing Council: Meeting of The Manufacturing Council National Oceanic and Atmospheric Administration [I.D. 052406C] Marine Mammals; File Nos. 455–1760, 116–1786, 898–1764 International Trade Administration, U.S. Department of Commerce. ACTION: Notice of public meeting. AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice; issuance of permits. SUMMARY: The Manufacturing Council will hold a full Council meeting to discuss topics related to the state of manufacturing. The Manufacturing Council is a Secretarial Board at the Department of Commerce, established to ensure regular communication between Government and the manufacturing sector. This meeting of The Manufacturing Council will include updates by the Council’s three subcommittees and discussion on research and development, and trade. For information about the Council, please visit the Manufacturing Council Web site at: https:// www.manufacturing.gov/council.htm. DATES: June 16, 2005. Time: 10:30 a.m. ADDRESSES: National Institute of Standards and Technology, 100 Bureau Drive, Administration Building, Employees Lounge, Gaithersburg, MD 20899. This program is physically accessible to people with disabilities. Requests for sign language interpretation or other auxiliary aids should be submitted no later than June 12, 2006, to The Manufacturing Council, Room 4043, Washington, DC 20230. To Attend: Due to security rules, if you would like to attend, please send your full name and affiliation to sam.giller@mail.doc.gov no later than June 12, 2006. FOR FURTHER INFORMATION CONTACT: The Manufacturing Council Executive Secretariat, Room 4043, Washington, DC 20230 (Phone: 202–482–1369). The Executive Secretariat encourages interested parties to refer to The Manufacturing Council Web site (https:// www.manufacturing.gov/council/) for the most up-to-date information about the meeting and the Council. SUMMARY: Notice is hereby given that permits to conduct research and/or enhancement activities on captive Hawaiian monk seals (Monachus schauinslandi) have been issued to the following organizations: File No. 455–1760: The Waikiki Aquarium, 2777 Kalakaua Avenue, Honolulu, HI 96815 (Dr. Andrew Rossiter, Responsible Party). File No. 116–1786: Sea World, Inc., 7007 Sea World Dr., Orlando, FL 32821 (Brad Andrews, Responsible Party). File No. 898–1764: Sea Life Park Hawaii, 41–202 Kalanianaole Highway, Waimanalo, HI 96795 (Dr. Renato Lenzi, Responsible Party). ADDRESSES: The permit and related documents are available for review upon written request or by appointment in the following office(s): Permits, Conservation and Education Division, Office of Protected Resources, NMFS, 1315 East-West Highway, Room 13705, Silver Spring, MD 20910; phone (301)713–2289; fax (301)427–2521; Pacific Islands Region, NMFS, 1601 Kapiolani Blvd., Rm 1110, Honolulu, HI 96814–4700; phone (808)973–2935; fax (808)973–2941; and Southeast Region, NMFS, 9721 Executive Center Drive North, St. Petersburg, FL 33702–2432; phone (727)570–5301; fax (727)570–5320. FOR FURTHER INFORMATION CONTACT: Amy Sloan or Jennifer Skidmore, (301)713–2289. SUPPLEMENTARY INFORMATION: On May 19, 2005, notice was published in the Federal Register (70 FR 28909) that a request for an enhancement permit had been submitted by Sea World, Inc. On July 15, 2004, notice was published in the Federal Register (69 FR 42424) that a request for a scientific research and AGENCY: PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 E:\FR\FM\02JNN1.SGM 02JNN1

Agencies

[Federal Register Volume 71, Number 106 (Friday, June 2, 2006)]
[Notices]
[Page 32044]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-8622]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


The Manufacturing Council: Meeting of The Manufacturing Council

AGENCY: International Trade Administration, U.S. Department of 
Commerce.

ACTION: Notice of public meeting.

-----------------------------------------------------------------------

SUMMARY: The Manufacturing Council will hold a full Council meeting to 
discuss topics related to the state of manufacturing. The Manufacturing 
Council is a Secretarial Board at the Department of Commerce, 
established to ensure regular communication between Government and the 
manufacturing sector. This meeting of The Manufacturing Council will 
include updates by the Council's three subcommittees and discussion on 
research and development, and trade. For information about the Council, 
please visit the Manufacturing Council Web site at: https://
www.manufacturing.gov/council.htm.

DATES: June 16, 2005. Time: 10:30 a.m.

ADDRESSES: National Institute of Standards and Technology, 100 Bureau 
Drive, Administration Building, Employees Lounge, Gaithersburg, MD 
20899. This program is physically accessible to people with 
disabilities. Requests for sign language interpretation or other 
auxiliary aids should be submitted no later than June 12, 2006, to The 
Manufacturing Council, Room 4043, Washington, DC 20230.
    To Attend: Due to security rules, if you would like to attend, 
please send your full name and affiliation to sam.giller@mail.doc.gov 
no later than June 12, 2006.

FOR FURTHER INFORMATION CONTACT: The Manufacturing Council Executive 
Secretariat, Room 4043, Washington, DC 20230 (Phone: 202-482-1369). The 
Executive Secretariat encourages interested parties to refer to The 
Manufacturing Council Web site (https://www.manufacturing.gov/council/) 
for the most up-to-date information about the meeting and the Council.

    Dated: May 26, 2006.
Sam Giller,
Executive Secretary, The Manufacturing Council.
[FR Doc. E6-8622 Filed 6-1-06; 8:45 am]
BILLING CODE 3510-DR-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.