Decision That Nonconforming 2002 Ferrari Spider and Coupe Passenger Cars Manufactured From September 1, 2002 Through December 31, 2002 Are Eligible for Importation, 32188-32189 [E6-8539]
Download as PDF
<![CDATA[
32188
Federal Register / Vol. 71, No. 106 / Friday, June 2, 2006 / Notices
Wilson has sufficient vision to perform
the driving tasks required to operate a
commercial vehicle.’’ Mr. Wilson
reported that he has driven straight
trucks for 35 years, accumulating
175,000 miles. He holds a Class B CDL
from New Hampshire. His driving
record for the last 3 years shows no
crashes or convictions for moving
violations in a CMV.
Request for Comments
In accordance with 49 U.S.C. 31136(e)
and 31315, FMCSA requests public
comment from all interested persons on
the exemption petitions described in
this Notice. The Agency will consider
all comments received before the close
of business July 3, 2006. Comments will
be available for examination in the
docket at the location listed under the
ADDRESSES section of this Notice. The
Agency will file comments received
after the comment closing date in the
public docket, and will consider them to
the extent practicable. In addition to late
comments, FMCSA will also continue to
file, in the public docket, relevant
information that becomes available after
the comment closing date. Interested
persons should monitor the public
docket for new material.
Issued on: May 26, 2006.
Pamela M. Pelcovits,
Acting Associate Administrator, Policy and
Program Development.
[FR Doc. E6–8588 Filed 6–1–06; 8:45 am]
BILLING CODE 4910–EX–P
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[Docket No. NHTSA–2003–16612; Notice 3]
Decision That Nonconforming 2002
Ferrari Spider and Coupe Passenger
Cars Manufactured From September 1,
2002 Through December 31, 2002 Are
Eligible for Importation
jlentini on PROD1PC65 with NOTICES
AGENCY: National Highway Traffic
Safety Administration, DOT.
ACTION: Notice of decision by the
National Highway Traffic Safety
Administration that nonconforming
2002 Ferrari Spider and Coupe
passenger cars manufactured from
September 1, 2002 through December
31, 2002 are eligible for importation.
SUMMARY: This document announces a
decision by the National Highway
Traffic Safety Administration (NHTSA)
that certain 2002 Ferrari Spider and
Coupe passenger cars manufactured
from September 1, 2002 through
December 31, 2002 that were not
VerDate Aug<31>2005
18:05 Jun 01, 2006
Jkt 208001
originally manufactured to comply with
all applicable Federal motor vehicle
safety standards (FMVSS) are eligible
for importation into the United States
because they are substantially similar to
vehicles originally manufactured for
importation into and sale in the United
States and that were certified by their
manufacturer as complying with the
safety standards (the U.S. certified
version of the 2002 Ferrari Spider and
Coupe passenger car manufactured from
September 1, 2002 through December
31, 2002), and they are capable of being
readily altered to conform to the
standards.
DATES: This decision was effective April
1, 2004. The agency notified the
petitioner at that time that the subject
vehicles are eligible for importation.
This document provides public notice
of the eligibility decision.
FOR FURTHER INFORMATION CONTACT:
Coleman Sachs, Office of Vehicle Safety
Compliance, NHTSA (202–366–3151).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a
motor vehicle that was not originally
manufactured to conform to all
applicable FMVSS shall be refused
admission into the United States unless
NHTSA has decided that the motor
vehicle is substantially similar to a
motor vehicle originally manufactured
for importation into and sale in the
United States, certified as required
under 49 U.S.C. 30115, and of the same
model year as the model of the motor
vehicle to be compared, and is capable
of being readily altered to conform to all
applicable FMVSS.
Petitions for eligibility decisions may
be submitted by either manufacturers or
importers who have registered with
NHTSA pursuant to 49 CFR part 592. As
specified in 49 CFR 593.7, NHTSA
publishes notice in the Federal Register
of each petition that it receives, and
affords interested persons an
opportunity to comment on the petition.
At the close of the comment period,
NHTSA decides, on the basis of the
petition and any comments that it has
received, whether the vehicle is eligible
for importation. The agency then
publishes this decision in the Federal
Register.
Automobile Concepts, Inc. of North
Miami, Florida (‘‘AMC’’) (Registered
Importer 01–278), petitioned NHTSA to
decide whether 2002 Ferrari Spider and
Coupe passenger cars manufactured
from September 1, 2002 through
December 31, 2002 are eligible for
importation into the United States.
NHTSA published a notice of the
PO 00000
Frm 00161
Fmt 4703
Sfmt 4703
petition on December 11, 2003 (68 FR
69125) to afford an opportunity for
public comment. The reader is referred
to that notice for a thorough description
of the petition.
One substantive comment was
received in response to the notice of
petition, from Ferrari North America,
Inc. (FNA), the U.S. representative of
the vehicle’s original manufacturer.
FNA’s comment addressed issues it
believed AMC had overlooked in
describing alterations needed to
conform 2002 Ferrari Spider and Coupe
passenger cars manufactured from
September 1, 2002 through December
31, 2002 models to certain of the
FMVSS. FNA observed that the nonU.S. certified 2002 Ferrari 360 passenger
cars that are the subject of the instant
petition (i.e., those manufactured from
September 1, 2002 through December
31, 2002), are identical, with respect to
their conformance to applicable FMVSS,
to the nonconforming 2002 Ferrari 360
passenger cars manufactured before
September 1, 2002 that NHTSA has
previously decided to be eligible for
importation, as reflected in a notice of
decision published on April 3, 2003 at
68 FR 16346 (Docket No. NHTSA–2002–
13219). As a consequence, FNA
contended that if the agency were to
grant import eligibility to 2002 Ferrari
360 passenger cars manufactured from
September 1, 2002 through December
31, 2002, that decision would have to be
made on the same basis as the decision
to grant import eligibility to the 2002
models manufactured before September
1, 2002.
The agency accorded AMC an
opportunity to respond to the issues
raised by FNA. FNA’s comments,
AMC’s responses, and NHTSA’s
analysis are set forth below for each of
the issues that FNA raised.
(1) FMVSS No. 201 Occupant
Protection in Interior Impact: The
petition identified a number of interior
trim components in the non-U.S.
certified model that must be replaced
with U.S.-model components or
modified to meet the standard. FNA
identified 16 interior trim components
that are not found in the non-U.S.
certified model and stated that all of
these should be replaced with U.S.model components. FNA also requested
additional information concerning the
petitioner’s proposed substitution of
occupant interior components
purchased from another RI. FNA
expressed the belief that an RI
responsible for certifying a vehicle
cannot rely on components
manufactured by another RI when
conforming the vehicle, whether or not
the components have been shown to
E:\FR\FM\02JNN1.SGM
02JNN1
jlentini on PROD1PC65 with NOTICES
Federal Register / Vol. 71, No. 106 / Friday, June 2, 2006 / Notices
bring the vehicle into compliance with
the standard. AMC responded that it
was aware of the need for replacing 16
interior components, but could not
provide technical information regarding
the components that it intended to
purchase from J.K. Technologies,
another RI, on account of a
nondisclosure agreement that it had
entered with that company.
NHTSA’s Analysis: The modifications
AMC identified as needed to conform
the vehicle to the standard would not
prelude the vehicle from being deemed
eligible for importation. Conformity
packages submitted for vehicles
imported under the decision must
demonstrate that the vehicle is
equipped with components that allow it
to achieve compliance with the
standard. Any modification or
replacement of components necessary to
meet the requirements of the standard
must be shown to bring the vehicle into
compliance. Such proof must be
submitted by an RI as part of any
conformity package submitted for 2002
Ferrari Spider and Coupe passenger cars
manufactured from September 1, 2002
through December 31, 2002.
Addressing the issue that FNA raised
regarding the purchase by one RI of
components manufactured or modified
by another RI, the agency notes that if
the supplier has proven to the agency’s
satisfaction, either through a import
eligibility petition that was granted by
the agency or through a conformity
package that the agency approved, that
a vehicle complies with the standard
when equipped with the components at
issue, the agency will allow the
purchasing RI to demonstrate
conformance by the installation of those
components. This necessarily assumes
the vehicle for which the supplying RI
has manufactured or modified the
components is of the same make, model,
and model year as the vehicle on which
the component is to be installed, or if
the vehicle is of a different model year,
there were no changes affecting
compliance with the standard at issue
between that model year and the model
year of the vehicle for which the
component is purchased.
(2) FMVSS No. 301 Fuel System
Integrity: The petition identified a
number of fuel system components in
the non-U.S. certified model that must
be replaced with U.S.-model
components to achieve compliance with
the standard. FNA contended that the
same modifications required for the
2001 and 2002 Ferrari Spider and Coupe
passenger cars manufactured before
September 1, 2002, be required for those
manufactured from September 1, 2002
through December 31, 2002. AMC
VerDate Aug<31>2005
18:05 Jun 01, 2006
Jkt 208001
responded that it intended to perform
modifications identical to those
identified as needed to conform vehicles
in the earlier production run.
NHTSA’s Analysis: Because FNA
described the 2001 and 2002 models as
being identical with respect to their
conformance with all applicable FMVSS
and AMC did not take issue with this
representation, the agency has
concluded that the following
modifications, which were identified as
need to conform the 2002 Ferrari 360
Spider and Coupe passenger cars
manufactured before September 1, 2002
to the requirements of the standard, are
appropriate for the those manufactured
from September 1, 2002 through
December 31, 2002 as well:
(a) replacement of the fuel/vapor
separator, rollover valve, filler neck,
vapor lines, evaporative (charcoal)
canister, air pump, and associated
hardware on non-U.S. certified versions
of the vehicle to make them identical to
those in the U.S. certified version;
(b) modification of the U.S.-model
filler neck so that it can be attached to
the non-U.S.-model tank; and
(c) relocation of the charcoal canister,
air pump, fuel filler neck, and rollover
valve so that they are in essentially the
same position as those components
found on the U.S. certified vehicle.
(3) FMVSS No. 401 Interior Trunk
Release: The petition stated that an
extra cable and actuator must be
installed on the hood latch in order to
allow an occupant to unlatch the hood
from within the trunk, as required by
the standard. FNA disagreed that the
modifications described in the petition
would bring the vehicle into compliance
with all applicable requirements of
paragraph S4.3(b)(1) of the standard.
AMC responded by stating that it will
install U.S.-model components so that
the non-U.S.-certified vehicle complies
with the standard in the same manner
as the U.S.-certified vehicle.
NHTSA’s Analysis: Because AMC’s
agreement to install U.S.-model
components resolves the issue raised by
FNA, the agency has concluded that the
vehicles are capable of being readily
altered in that manner to meet the
requirements of the standard.
Conclusion
In view of the above considerations,
NHTSA decided to grant the petition.
Vehicle Eligibility Number for Subject
Vehicles
The importer of a vehicle admissible
under any final decision must indicate
on the form HS–7 accompanying entry
the appropriate vehicle eligibility
number indicating that the vehicle is
PO 00000
Frm 00162
Fmt 4703
Sfmt 4703
32189
eligible for entry. VSP–433 is the
vehicle eligibility number assigned to
vehicles admissible under this notice of
final decision.
Final Decision
Accordingly, on the basis of the
foregoing, NHTSA decided that 2002
Ferrari Spider and Coupe passenger cars
manufactured from September 1, 2002
through December 31, 2002 that were
not originally manufactured to comply
with all applicable FMVSS, are
substantially similar to 2002 Ferrari
Spider and Coupe passenger cars
manufactured from September 1, 2002
through December 31, 2002 originally
manufactured for importation into and
sale in the United States and certified
under 49 U.S.C. 30115, and are capable
of being readily altered to conform to all
applicable FMVSS.
Authority: 49 U.S.C. 30141(a)(1)(A) and
(b)(1); 49 CFR 593.8; delegations of authority
at 49 CFR 1.50 and 501.8.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E6–8539 Filed 6–1–06; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[Docket No. NHTSA–2003–15681; Notice 3]
Decision That Nonconforming 2003
Ferrari Spider and Coupe Passenger
Cars Are Eligible for Importation
AGENCY: National Highway Traffic
Safety Administration, DOT.
ACTION: Notice of decision by the
National Highway Traffic Safety
Administration that nonconforming
2003 Ferrari Spider and Coupe
passenger cars are eligible for
importation.
SUMMARY: This document announces a
decision by the National Highway
Traffic Safety Administration (NHTSA)
that certain 2003 Ferrari Spider and
Coupe passenger cars that were not
originally manufactured to comply with
all applicable Federal motor vehicle
safety standards (FMVSS) are eligible
for importation into the United States
because they are substantially similar to
vehicles originally manufactured for
importation into and sale in the United
States and that were certified by their
manufacturer as complying with the
safety standards (the U.S. certified
version of the 2003 Ferrari Spider and
Coupe passenger cars), and they are
E:\FR\FM\02JNN1.SGM
02JNN1
]]>Agencies
[Federal Register Volume 71, Number 106 (Friday, June 2, 2006)]
[Notices]
[Pages 32188-32189]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-8539]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-2003-16612; Notice 3]
Decision That Nonconforming 2002 Ferrari Spider and Coupe
Passenger Cars Manufactured From September 1, 2002 Through December 31,
2002 Are Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of decision by the National Highway Traffic Safety
Administration that nonconforming 2002 Ferrari Spider and Coupe
passenger cars manufactured from September 1, 2002 through December 31,
2002 are eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This document announces a decision by the National Highway
Traffic Safety Administration (NHTSA) that certain 2002 Ferrari Spider
and Coupe passenger cars manufactured from September 1, 2002 through
December 31, 2002 that were not originally manufactured to comply with
all applicable Federal motor vehicle safety standards (FMVSS) are
eligible for importation into the United States because they are
substantially similar to vehicles originally manufactured for
importation into and sale in the United States and that were certified
by their manufacturer as complying with the safety standards (the U.S.
certified version of the 2002 Ferrari Spider and Coupe passenger car
manufactured from September 1, 2002 through December 31, 2002), and
they are capable of being readily altered to conform to the standards.
DATES: This decision was effective April 1, 2004. The agency notified
the petitioner at that time that the subject vehicles are eligible for
importation. This document provides public notice of the eligibility
decision.
FOR FURTHER INFORMATION CONTACT: Coleman Sachs, Office of Vehicle
Safety Compliance, NHTSA (202-366-3151).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable FMVSS shall be
refused admission into the United States unless NHTSA has decided that
the motor vehicle is substantially similar to a motor vehicle
originally manufactured for importation into and sale in the United
States, certified as required under 49 U.S.C. 30115, and of the same
model year as the model of the motor vehicle to be compared, and is
capable of being readily altered to conform to all applicable FMVSS.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
Automobile Concepts, Inc. of North Miami, Florida (``AMC'')
(Registered Importer 01-278), petitioned NHTSA to decide whether 2002
Ferrari Spider and Coupe passenger cars manufactured from September 1,
2002 through December 31, 2002 are eligible for importation into the
United States. NHTSA published a notice of the petition on December 11,
2003 (68 FR 69125) to afford an opportunity for public comment. The
reader is referred to that notice for a thorough description of the
petition.
One substantive comment was received in response to the notice of
petition, from Ferrari North America, Inc. (FNA), the U.S.
representative of the vehicle's original manufacturer. FNA's comment
addressed issues it believed AMC had overlooked in describing
alterations needed to conform 2002 Ferrari Spider and Coupe passenger
cars manufactured from September 1, 2002 through December 31, 2002
models to certain of the FMVSS. FNA observed that the non-U.S.
certified 2002 Ferrari 360 passenger cars that are the subject of the
instant petition (i.e., those manufactured from September 1, 2002
through December 31, 2002), are identical, with respect to their
conformance to applicable FMVSS, to the nonconforming 2002 Ferrari 360
passenger cars manufactured before September 1, 2002 that NHTSA has
previously decided to be eligible for importation, as reflected in a
notice of decision published on April 3, 2003 at 68 FR 16346 (Docket
No. NHTSA-2002-13219). As a consequence, FNA contended that if the
agency were to grant import eligibility to 2002 Ferrari 360 passenger
cars manufactured from September 1, 2002 through December 31, 2002,
that decision would have to be made on the same basis as the decision
to grant import eligibility to the 2002 models manufactured before
September 1, 2002.
The agency accorded AMC an opportunity to respond to the issues
raised by FNA. FNA's comments, AMC's responses, and NHTSA's analysis
are set forth below for each of the issues that FNA raised.
(1) FMVSS No. 201 Occupant Protection in Interior Impact: The
petition identified a number of interior trim components in the non-
U.S. certified model that must be replaced with U.S.-model components
or modified to meet the standard. FNA identified 16 interior trim
components that are not found in the non-U.S. certified model and
stated that all of these should be replaced with U.S.-model components.
FNA also requested additional information concerning the petitioner's
proposed substitution of occupant interior components purchased from
another RI. FNA expressed the belief that an RI responsible for
certifying a vehicle cannot rely on components manufactured by another
RI when conforming the vehicle, whether or not the components have been
shown to
[[Page 32189]]
bring the vehicle into compliance with the standard. AMC responded that
it was aware of the need for replacing 16 interior components, but
could not provide technical information regarding the components that
it intended to purchase from J.K. Technologies, another RI, on account
of a nondisclosure agreement that it had entered with that company.
NHTSA's Analysis: The modifications AMC identified as needed to
conform the vehicle to the standard would not prelude the vehicle from
being deemed eligible for importation. Conformity packages submitted
for vehicles imported under the decision must demonstrate that the
vehicle is equipped with components that allow it to achieve compliance
with the standard. Any modification or replacement of components
necessary to meet the requirements of the standard must be shown to
bring the vehicle into compliance. Such proof must be submitted by an
RI as part of any conformity package submitted for 2002 Ferrari Spider
and Coupe passenger cars manufactured from September 1, 2002 through
December 31, 2002.
Addressing the issue that FNA raised regarding the purchase by one
RI of components manufactured or modified by another RI, the agency
notes that if the supplier has proven to the agency's satisfaction,
either through a import eligibility petition that was granted by the
agency or through a conformity package that the agency approved, that a
vehicle complies with the standard when equipped with the components at
issue, the agency will allow the purchasing RI to demonstrate
conformance by the installation of those components. This necessarily
assumes the vehicle for which the supplying RI has manufactured or
modified the components is of the same make, model, and model year as
the vehicle on which the component is to be installed, or if the
vehicle is of a different model year, there were no changes affecting
compliance with the standard at issue between that model year and the
model year of the vehicle for which the component is purchased.
(2) FMVSS No. 301 Fuel System Integrity: The petition identified a
number of fuel system components in the non-U.S. certified model that
must be replaced with U.S.-model components to achieve compliance with
the standard. FNA contended that the same modifications required for
the 2001 and 2002 Ferrari Spider and Coupe passenger cars manufactured
before September 1, 2002, be required for those manufactured from
September 1, 2002 through December 31, 2002. AMC responded that it
intended to perform modifications identical to those identified as
needed to conform vehicles in the earlier production run.
NHTSA's Analysis: Because FNA described the 2001 and 2002 models as
being identical with respect to their conformance with all applicable
FMVSS and AMC did not take issue with this representation, the agency
has concluded that the following modifications, which were identified
as need to conform the 2002 Ferrari 360 Spider and Coupe passenger cars
manufactured before September 1, 2002 to the requirements of the
standard, are appropriate for the those manufactured from September 1,
2002 through December 31, 2002 as well:
(a) replacement of the fuel/vapor separator, rollover valve, filler
neck, vapor lines, evaporative (charcoal) canister, air pump, and
associated hardware on non-U.S. certified versions of the vehicle to
make them identical to those in the U.S. certified version;
(b) modification of the U.S.-model filler neck so that it can be
attached to the non-U.S.-model tank; and
(c) relocation of the charcoal canister, air pump, fuel filler
neck, and rollover valve so that they are in essentially the same
position as those components found on the U.S. certified vehicle.
(3) FMVSS No. 401 Interior Trunk Release: The petition stated that
an extra cable and actuator must be installed on the hood latch in
order to allow an occupant to unlatch the hood from within the trunk,
as required by the standard. FNA disagreed that the modifications
described in the petition would bring the vehicle into compliance with
all applicable requirements of paragraph S4.3(b)(1) of the standard.
AMC responded by stating that it will install U.S.-model components so
that the non-U.S.-certified vehicle complies with the standard in the
same manner as the U.S.-certified vehicle.
NHTSA's Analysis: Because AMC's agreement to install U.S.-model
components resolves the issue raised by FNA, the agency has concluded
that the vehicles are capable of being readily altered in that manner
to meet the requirements of the standard.
Conclusion
In view of the above considerations, NHTSA decided to grant the
petition.
Vehicle Eligibility Number for Subject Vehicles
The importer of a vehicle admissible under any final decision must
indicate on the form HS-7 accompanying entry the appropriate vehicle
eligibility number indicating that the vehicle is eligible for entry.
VSP-433 is the vehicle eligibility number assigned to vehicles
admissible under this notice of final decision.
Final Decision
Accordingly, on the basis of the foregoing, NHTSA decided that 2002
Ferrari Spider and Coupe passenger cars manufactured from September 1,
2002 through December 31, 2002 that were not originally manufactured to
comply with all applicable FMVSS, are substantially similar to 2002
Ferrari Spider and Coupe passenger cars manufactured from September 1,
2002 through December 31, 2002 originally manufactured for importation
into and sale in the United States and certified under 49 U.S.C. 30115,
and are capable of being readily altered to conform to all applicable
FMVSS.
Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E6-8539 Filed 6-1-06; 8:45 am]
BILLING CODE 4910-59-P
