Heavy Forged Hand Tools From China, 6290 [E6-1637]

Download as PDF 6290 Federal Register / Vol. 71, No. 25 / Tuesday, February 7, 2006 / Notices INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731–TA–457–A–D (Second Review)] Heavy Forged Hand Tools From China Determinations On the basis of the record 1 developed in the subject five-year reviews, the United States International Trade Commission (Commission) determines, pursuant to section 751(c) of the Tariff Act of 1930 (19 U.S.C. 1675(c)) (the Act), that revocation of the antidumping duty orders on heavy forged hand tools from China would be likely to lead to continuation or recurrence of material injury to industries in the United States within a reasonably foreseeable time. The Commission instituted these reviews on July 1, 2005 (70 FR 38197) and determined on October 4, 2005 that it would conduct expedited reviews (70 FR 61156, October 20, 2005). The Commission transmitted its determinations in these reviews to the Secretary of Commerce on January 31, 2006. The views of the Commission are contained in USITC Publication 3836 (January 2006), entitled Heavy Forged Hand Tools from China: Investigation Nos. 731–TA–457 (Second Review). By order of the Commission. Issued: February 1, 2006. Marilyn R. Abbott, Secretary to the Commission. [FR Doc. E6–1637 Filed 2–6–06; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [USITC SE–06–011] Sunshine Act Meeting Notice erjones on PROD1PC68 with NOTICES By order of the Commission: Issued: February 3, 2006. Marilyn R. Abbott, Secretary to the Commission. [FR Doc. 06–1176 Filed 2–3–06; 2:00 pm] BILLING CODE 7020–02–P Background AGENCY HOLDING THE MEETING: International Trade Commission. TIME AND DATE: February 23, 2006 at 11 a.m. PLACE: Room 101, 500 E Street SW., Washington, DC 20436. Telephone: (202) 205–2000. STATUS: Open to the public. MATTERS TO BE CONSIDERED: 1. Agenda for future meetings: none. 2. Minutes. 3. Ratification List. 4. Inv. Nos. 701–TA–401 and 731– TA–853 and 854 (Second Review) 1 The record is defined in sec. 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). VerDate Aug<31>2005 (Structural Steel Beams from Japan and Korea)—briefing and vote. (The Commission is currently scheduled to transmit its determination and Commissioners’ opinions to the Secretary of Commerce on or before March 8, 2006.). 5. Outstanding action jackets: none. In accordance with Commission policy, subject matter listed above, not disposed of at the scheduled meeting, may be carried over to the agenda of the following meeting. 15:23 Feb 06, 2006 Jkt 208001 NUCLEAR REGULATORY COMMISSION [Docket Nos. 50–247 and 50–286; License Nos. DPR–26 and DPR–64; EA–05–190] In the Matter of Entergy Nuclear Operations, Inc. (Indian Point Nuclear Generating Unit Nos. 2 and 3); Confirmatory Order Modifying License (Effective Immediately) I Entergy Nuclear Operations, Inc. (Licensee) is the holder of Facility Operating License Nos. DPR–26 and DPR–64 issued by the Nuclear Regulatory Commission (NRC or Commission) pursuant to 10 CFR part 50. The licenses authorize the operation of Indian Point Nuclear Generating Unit Nos. 2 and 3, in accordance with the conditions specified therein. The facilities are located on the Licensee’s site in Buchanan, New York. DEPARTMENT OF LABOR II Office of the Assistant Secretary for Veterans Employment and Training The Energy Policy Act of 2005 (Act) (see 42 U.S.C. 2210 et seq.) was enacted on August 8, 2005. Section 651(b) of the Act states: President’s National Hire Veterans Committee; Notice of Open Meeting The President’s National Hire Veterans Committee was established under 38 U.S.C. 4100 Public Law 107– 288, Jobs for Veterans Act, to furnish information to employers with respect to the training and skills of veterans and disabled veterans, and to the advantages afforded employers by hiring veterans with training and skills and to facilitate the employment of veterans and disabled veterans through participation in Career One Stop National Labor Exchange, and other means. The President’s National Hire Veterans Committee will meet on Thursday, February 23, 2006 beginning at 1 p.m. at the Omni Hotel, 245 Water Street, Jacksonville, Florida. The committee will discuss raising corporate awareness as to the advantages of hiring veterans. Individuals needing special accommodations should notify Bill Offutt at (202) 693–4717 by February 16, 2006. Signed in Washington, DC, this 23rd day of January 2006. Charles S. Ciccolella, Assistant Secretary, Veterans Employment and Training. [FR Doc. E6–1610 Filed 2–6–06; 8:45 am] BILLING CODE 4510–79–P PO 00000 Frm 00042 Fmt 4703 Sfmt 4703 For any licensed nuclear power plants located where there is a permanent population, as determined by the 2000 decennial census, in excess of 15,000,000 within a 50-mile radius of the power plant, not later than 18 months after enactment of this Act, the Commission shall require that backup power to be available for the emergency notification system of the power plant, including the emergency siren warning system, if the alternating current supply within the 10-mile emergency planning zone of the power plant is lost. Public Law 109–58, 119 Stat 594. Indian Point Nuclear Generating Unit Nos. 2 and 3 meet the criteria of the Act. Adequate backup power for the emergency notification system (ENS), as required by section 651(b) of the Act, requires that: (a) The backup power supply for the Public Alerting System (PAS) must meet commonly-applicable standards, such as National Fire Protection Association (NFPA) Standard 1221, Standard for the Installation, Maintenance, and Use of Emergency Communications Systems (2002) and Underwriters Laboratory (UL) 2017, section 58.2; (b) each PAS and PAS Alerting Appliance (PASAA) must receive adequate power to perform their intended functions such that backup power is sufficient to allow operation in standby mode for a minimum of 24 hours and in alert mode for a minimum of 15 minutes; (c) batteries used for backup power must recharge to at least 80 percent of their capacity in no less than 24 hours; (d) except for those E:\FR\FM\07FEN1.SGM 07FEN1

Agencies

[Federal Register Volume 71, Number 25 (Tuesday, February 7, 2006)]
[Notices]
[Page 6290]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E6-1637]



[[Page 6290]]

=======================================================================
-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 731-TA-457-A-D (Second Review)]


Heavy Forged Hand Tools From China

Determinations

    On the basis of the record \1\ developed in the subject five-year 
reviews, the United States International Trade Commission (Commission) 
determines, pursuant to section 751(c) of the Tariff Act of 1930 (19 
U.S.C. 1675(c)) (the Act), that revocation of the antidumping duty 
orders on heavy forged hand tools from China would be likely to lead to 
continuation or recurrence of material injury to industries in the 
United States within a reasonably foreseeable time.
---------------------------------------------------------------------------

    \1\ The record is defined in sec. 207.2(f) of the Commission's 
Rules of Practice and Procedure (19 CFR 207.2(f)).
---------------------------------------------------------------------------

Background

    The Commission instituted these reviews on July 1, 2005 (70 FR 
38197) and determined on October 4, 2005 that it would conduct 
expedited reviews (70 FR 61156, October 20, 2005).
    The Commission transmitted its determinations in these reviews to 
the Secretary of Commerce on January 31, 2006. The views of the 
Commission are contained in USITC Publication 3836 (January 2006), 
entitled Heavy Forged Hand Tools from China: Investigation Nos. 731-TA-
457 (Second Review).

    By order of the Commission.

    Issued: February 1, 2006.
Marilyn R. Abbott,
Secretary to the Commission.
 [FR Doc. E6-1637 Filed 2-6-06; 8:45 am]
BILLING CODE 7020-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.