Training Standards for Shaft and Slope Construction Workers at Underground Mines and Surface Areas of Underground Mines, 3613 [C5-24624]

Download as PDF 3613 Corrections Federal Register Vol. 71, No. 14 Monday, January 23, 2006 This section of the FEDERAL REGISTER contains editorial corrections of previously published Presidential, Rule, Proposed Rule, and Notice documents. These corrections are prepared by the Office of the Federal Register. Agency prepared corrections are issued as signed documents and appear in the appropriate document categories elsewhere in the issue. 1. On page 77718, in Table 2, in the third column, in the first and second lines of the column heading, ‘‘UG & ≤ surf.’’ should read ‘‘UG & surf.’’. 2. On page 77721, in the first column, in the second full paragraph, in the first line, ‘‘Shaft and slope workers’’ should read, ‘‘‘‘Shaft and slope workers’’. [FR Doc. C5–24624 Filed 1–20–06; 8:45 am] BILLING CODE 1505–01–D January 18, 2006, make the following correction: On page 2897, in the second column, footnote 1 at the bottom of the column should read ‘‘1As pertinent to this rule, a CMV is a motor vehicle used in commerce that is designed to transport at least 16 passengers, including the driver. 49 U.S.C. 31301(4)(B)’’. [FR Doc. C6–413 Filed 1–20–06; 8:45 am] DEPARTMENT OF LABOR BILLING CODE 1505–01–D Mine Safety and Health Administration DEPARTMENT OF TRANSPORTATION 30 CFR Part 48 Federal Motor Carrier Safety Administration RIN 1219–AB35 Training Standards for Shaft and Slope Construction Workers at Underground Mines and Surface Areas of Underground Mines erjones on PROD1PC61 with NOTICES2 Correction In rule document 05–24624 beginning on page 77716 in the issue of Friday, December 30, 2005, make the following corrections: VerDate Aug<31>2005 09:23 Jan 20, 2006 Jkt 208001 49 CFR Parts 383 and 384 [Docket No. FMCSA–2005–21603] RIN 2126–AA94 Commercial Driver’s License Standards; School Bus Endorsement Correction In rule document 06–413 beginning on page 2897 in the issue of Wednesday, PO 00000 Frm 00001 Fmt 4734 Sfmt 4734 E:\FR\FM\23JACX.SGM 23JACX

Agencies

[Federal Register Volume 71, Number 14 (Monday, January 23, 2006)]
[Corrections]
[Page 3613]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: C5-24624]



Federal Register / Vol. 71, No. 14 / Monday, January 23, 2006 / 
CORRECTIONS

[[Page 3613]]



DEPARTMENT OF LABOR

Mine Safety and Health Administration

30 CFR Part 48

RIN 1219-AB35


Training Standards for Shaft and Slope Construction Workers at 
Underground Mines and Surface Areas of Underground Mines

Correction

    In rule document 05-24624 beginning on page 77716 in the issue of 
Friday, December 30, 2005, make the following corrections:
    1. On page 77718, in Table 2, in the third column, in the first and 
second lines of the column heading, ``UG & <= surf.'' should read ``UG 
& surf.''.
    2. On page 77721, in the first column, in the second full 
paragraph, in the first line, ``Shaft and slope workers'' should read, 
````Shaft and slope workers''.

[FR Doc. C5-24624 Filed 1-20-06; 8:45 am]
BILLING CODE 1505-01-D
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.