Teradyne, Inc., Currently Known as Amphenol TCS, a Division of Amphenol Corporation, Connectors and Backplane Assemblies Facility and Printed Circuit Board Facility, Including Leased Workers of Microtech Staffing Group, TAC Worldwide and Technical Needs, Nashua, NH; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance, 76892 [E5-7952]

Download as PDF 76892 Federal Register / Vol. 70, No. 248 / Wednesday, December 28, 2005 / Notices The petitioner has requested that the petition be withdrawn. Consequently, the investigation has been terminated. Signed at Washington, DC, this 13th day of December, 2005. Richard Church, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. E5–7954 Filed 12–27–05; 8:45 am] BILLING CODE 4510–30–P DEPARTMENT OF LABOR Employment and Training Administration [TA–W–56,461 and TA–W–56,461A] wwhite on PROD1PC65 with NOTICES Teradyne, Inc., Currently Known as Amphenol TCS, a Division of Amphenol Corporation, Connectors and Backplane Assemblies Facility and Printed Circuit Board Facility, Including Leased Workers of Microtech Staffing Group, TAC Worldwide and Technical Needs, Nashua, NH; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance In accordance with section 223 of the Trade Act of 1974 (19 U.S.C. 2273), and section 246 of the Trade Act of 1974, (26 U.S.C. 2813), as amended, the Department of Labor issued a Certification of Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance on March 10, 2005, applicable to workers of Teradyne, Inc., Teradyne Connection Systems (TCS), Connectors and Backplane Assemblies Facility and the Printed Circuit Board Facility, including leased workers of Microtech Staffing Group, TAC Worldwide, and Technical Needs, Nashua, New Hampshire. The notice was published in the Federal Register on April 1, 2005 (70 FR 16848–16849). At the request of a company official, the Department reviewed the certification for workers of the subject firm. The workers at the Connectors and Backplane Assemblies Facility produce connectors and backplane assemblies; they are not separately identifiable by articles produced. Workers of the Printed Circuit Board Facility produce printed circuit boards. The subject firm originally named Teradyne, Inc., Teradyne Connection Systems (TCS), was renamed Teradyne, Inc., Amphenol TCS, a Division of Amphenol Corporation on December 1, 2005, due to a change in ownership. The State agency reports that workers’ wages at the subject firm are being reported under the Unemployment Insurance VerDate Aug<31>2005 17:37 Dec 27, 2005 Jkt 208001 (UI) tax account for Teradyne, Inc., currently known as Amphenol TCS, a Division of Amphenol Corporation, Nashua, New Hampshire. Accordingly, the Department is amending this certification to reflect a change in ownership. The intent of the Department’s certification is to include all workers of Teradyne, Inc., currently known as Amphenol TCS, a Division of Amphenol Corporation, Connectors and Backplane Assemblies Facility and the Printed Circuit Board Facility who were adversely affected by a shift in production to Mexico, Malaysia and China. The amended notice applicable to TA–W–56,461 and TA–W–56,461A are hereby issued as follows: All workers of Teradyne, Inc., currently known as Amphenol TCS, a Division of Amphenol Corporation, Connectors and Backplane Assemblies Facility, Nashua, New Hampshire (TA–W–56,461), and Teradyne, Inc., currently known as Amphenol TCS, A Division of Amphenol Corporation, Printed Circuit Board Facility, Nashua, New Hampshire (TA–W–56,461A) including leased workers of Microtech Staffing Group, TAC Worldwide, and Technical Needs engaged in activities related to the production of connectors and backplane assemblies workers at the Connectors and Backplane Assemblies Facility, Nashua, New Hampshire (TA–W–56,461) and workers engaged in activities related to the production of printed circuit boards working at the Printed Circuit Boards Facility, Nashua, New Hampshire (TA–W–56,461A) who became totally or partially separated from employment on or after January 31, 2004, through March 10, 2007, are eligible to apply for adjustment assistance under section 223 of the Trade Act of 1974, and are also eligible to apply for alternative trade adjustment assistance under section 246 of the Trade Act of 1974. Signed at Washington, DC, this 14th day of December 2005. Elliott S. Kushner, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. E5–7952 Filed 12–27–05; 8:45 am] BILLING CODE 4510–30–P DEPARTMENT OF LABOR Employment and Training Administration [TA–W–58,408] Pursuant to section 221 of the Trade Act of 1974, as amended, an investigation was initiated on November 25, 2005 in response to a petition filed Frm 00158 Fmt 4703 Signed at Washington, DC, this 12th day of December, 2005. Linda G. Poole, Certifying Officer, Division of Trade Adjustment Assistance. [FR Doc. E5–7960 Filed 12–27–05; 8:45 am] BILLING CODE 4510–30–P DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification The following parties have filed petitions to modify the application of existing safety standards under section 101(c) of the Federal Mine Safety and Health Act of 1977. 1. RS&W Coal Company, Inc. [Docket No. M–2005–079–C] RS&W Coal Company, Inc., 207 Creek Road, Klingerstown, Pennsylvania 17941 has filed a petition to modify the application of 30 CFR 75.1312 (Explosives and detonators in underground magazines) to its RS&W Drift Mine (MSHA I.D. No. 23–01818) located in Schuylkill County, Pennsylvania. The petitioner requests a modification of the existing standard to permit the amount of explosives to be how much explosives are stored in a type two magazine built in accordance with ATF requirements in lieu of limiting the amount of explosives used underground to not more than 48 hours; to permit the use of two (2) magazines separated with 4 inches of hardwood; and to permit location of storage explosives and detonators in the anthracite coal mine gangway to be located 5 feet from the rail and offset from the rib at least 2 feet into solid rock, to protect the magazines from the dangers of moving vehicles and sources of electrical current. The petitioner asserts that the proposed alternative method would provide at least the same measure of protection as the existing standard. 2. Canyon Fuel Company, LLC United States Sugar Corporation Bryant Mill, Bryant, FL; Notice of Termination of Investigation PO 00000 by a company official on behalf of workers at United States Sugar Corporation, Bryant Mill, Bryant, Florida. The petitioner has requested that the petition be withdrawn. Consequently, the investigation has been terminated. Sfmt 4703 [Docket No. M–2005–080-C] Canyon Fuel Company, LLC, 397 South 800 West, Salina, Utah 84654 has filed a petition to modify the application of 30 CFR 75.1909(b)(6) (Nonpermissible diesel-powered equipment; design and performance E:\FR\FM\28DEN1.SGM 28DEN1

Agencies

[Federal Register Volume 70, Number 248 (Wednesday, December 28, 2005)]
[Notices]
[Page 76892]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E5-7952]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration

[TA-W-56,461 and TA-W-56,461A]


Teradyne, Inc., Currently Known as Amphenol TCS, a Division of 
Amphenol Corporation, Connectors and Backplane Assemblies Facility and 
Printed Circuit Board Facility, Including Leased Workers of Microtech 
Staffing Group, TAC Worldwide and Technical Needs, Nashua, NH; Amended 
Certification Regarding Eligibility To Apply for Worker Adjustment 
Assistance and Alternative Trade Adjustment Assistance

    In accordance with section 223 of the Trade Act of 1974 (19 U.S.C. 
2273), and section 246 of the Trade Act of 1974, (26 U.S.C. 2813), as 
amended, the Department of Labor issued a Certification of Eligibility 
To Apply for Worker Adjustment Assistance and Alternative Trade 
Adjustment Assistance on March 10, 2005, applicable to workers of 
Teradyne, Inc., Teradyne Connection Systems (TCS), Connectors and 
Backplane Assemblies Facility and the Printed Circuit Board Facility, 
including leased workers of Microtech Staffing Group, TAC Worldwide, 
and Technical Needs, Nashua, New Hampshire. The notice was published in 
the Federal Register on April 1, 2005 (70 FR 16848-16849).
    At the request of a company official, the Department reviewed the 
certification for workers of the subject firm. The workers at the 
Connectors and Backplane Assemblies Facility produce connectors and 
backplane assemblies; they are not separately identifiable by articles 
produced. Workers of the Printed Circuit Board Facility produce printed 
circuit boards.
    The subject firm originally named Teradyne, Inc., Teradyne 
Connection Systems (TCS), was renamed Teradyne, Inc., Amphenol TCS, a 
Division of Amphenol Corporation on December 1, 2005, due to a change 
in ownership. The State agency reports that workers' wages at the 
subject firm are being reported under the Unemployment Insurance (UI) 
tax account for Teradyne, Inc., currently known as Amphenol TCS, a 
Division of Amphenol Corporation, Nashua, New Hampshire.
    Accordingly, the Department is amending this certification to 
reflect a change in ownership.
    The intent of the Department's certification is to include all 
workers of Teradyne, Inc., currently known as Amphenol TCS, a Division 
of Amphenol Corporation, Connectors and Backplane Assemblies Facility 
and the Printed Circuit Board Facility who were adversely affected by a 
shift in production to Mexico, Malaysia and China.
    The amended notice applicable to TA-W-56,461 and TA-W-56,461A are 
hereby issued as follows:

    All workers of Teradyne, Inc., currently known as Amphenol TCS, 
a Division of Amphenol Corporation, Connectors and Backplane 
Assemblies Facility, Nashua, New Hampshire (TA-W-56,461), and 
Teradyne, Inc., currently known as Amphenol TCS, A Division of 
Amphenol Corporation, Printed Circuit Board Facility, Nashua, New 
Hampshire (TA-W-56,461A) including leased workers of Microtech 
Staffing Group, TAC Worldwide, and Technical Needs engaged in 
activities related to the production of connectors and backplane 
assemblies workers at the Connectors and Backplane Assemblies 
Facility, Nashua, New Hampshire (TA-W-56,461) and workers engaged in 
activities related to the production of printed circuit boards 
working at the Printed Circuit Boards Facility, Nashua, New 
Hampshire (TA-W-56,461A) who became totally or partially separated 
from employment on or after January 31, 2004, through March 10, 
2007, are eligible to apply for adjustment assistance under section 
223 of the Trade Act of 1974, and are also eligible to apply for 
alternative trade adjustment assistance under section 246 of the 
Trade Act of 1974.

    Signed at Washington, DC, this 14th day of December 2005.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
 [FR Doc. E5-7952 Filed 12-27-05; 8:45 am]
BILLING CODE 4510-30-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.