Notice of Tentative Decision To Partially Rescind Decision That Nonconforming 1990-1999 Nissan GTS and GTR Passenger Cars Are Eligible for Importation, 71375-71376 [E5-6530]
Download as PDF
Federal Register / Vol. 70, No. 227 / Monday, November 28, 2005 / Notices
The petitioner additionally states that
a vehicle identification plate must be
affixed to the vehicles near the left
windshield post to meet the
requirements of 49 CFR part 565.
Interested persons are invited to
submit comments on the petition
described above. Comments should refer
to the docket number and be submitted
to: Docket Management, Room PL–401,
400 Seventh St., SW., Washington, DC
20590. [Docket hours are from 9 a.m. to
5 p.m.]. It is requested but not required
that 10 copies be submitted.
All comments received before the
close of business on the closing date
indicated above will be considered, and
will be available for examination in the
docket at the above address both before
and after that date. To the extent
possible, comments filed after the
closing date will also be considered.
Notice of final action on the petition
will be published in the Federal
Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141(a)(1)(A) and
(b)(1); 49 CFR 593.8; delegations of authority
at 49 CFR 1.50 and 501.8.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E5–6529 Filed 11–25–05; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[Docket No. NHTSA–2005–22654]
Notice of Tentative Decision To
Partially Rescind Decision That
Nonconforming 1990–1999 Nissan GTS
and GTR Passenger Cars Are Eligible
for Importation
National Highway Traffic
Safety Administration (NHTSA), DOT.
ACTION: Notice of tentative decision to
partially rescind decision that
nonconforming 1990–1999 Nissan GTS
and GTR passenger cars are eligible for
importation.
AGENCY:
SUMMARY: This document provides
notice that NHTSA has tentatively
decided to partially rescind its decision
that 1990–1999 Nissan GTS and GTR
passenger cars not originally
manufactured to comply with all
applicable Federal motor vehicle safety
standards (FMVSS) are eligible for
importation into the United States. If
NHTSA makes this rescission, Nissan
R33 model GTS and GTR passenger cars
manufactured between January 1996
and June 1998 would be eligible for
VerDate Aug<31>2005
15:28 Nov 25, 2005
Jkt 208001
importation following the decision; the
others would not be eligible for
importation following the decision.
DATES: The closing date for comments
on the tentative decision is December
28, 2005.
ADDRESSES: Comments should refer to
the docket number and notice number,
and be submitted to: Docket
Management, Room PL–401, 400
Seventh St., SW., Washington, DC
20590. [Docket hours are from 9 a.m. to
5 p.m.] Anyone is able to search the
electronic form of all comments
received into any of our dockets by the
name of the individual submitting the
comment (or signing the comment, if
submitted on behalf of an association,
business, labor union, etc.). You may
review DOT’s complete Privacy Act
Statement in the Federal Register
published on April 11, 2000 (Volume
65, Number 70; Pages 19477–78) or you
may visit https://dms.dot.gov.
FOR FURTHER INFORMATION CONTACT:
Coleman Sachs, Office of Vehicle Safety
Compliance, NHTSA (202–366–3151).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a
motor vehicle that was not originally
manufactured to conform to all
applicable Federal motor vehicle safety
standards (FMVSS) shall be refused
admission into the United States unless
NHTSA has decided that the motor
vehicle is substantially similar to a
motor vehicle originally manufactured
for importation into and sale in the
United States, certified under 49 U.S.C.
30115, and of the same model year as
the model of the motor vehicle to be
compared, and is capable of being
readily altered to conform to all
applicable FMVSS. Where there is no
substantially similar U.S.-certified
motor vehicle, 49 U.S.C. 30141(a)(1)(B)
permits a nonconforming motor vehicle
to be admitted into the United States if
its safety features comply with, or are
capable of being altered to comply with,
all applicable FMVSS based on
destructive test data or other evidence
(such as an engineering analysis) that
NHTSA decides is adequate.
Petitions for eligibility decisions may
be submitted by either manufacturers or
importers who have registered with
NHTSA pursuant to 49 CFR Part 592. As
specified in 49 CFR 593.7, NHTSA
publishes notice in the Federal Register
of each petition that it receives, and
affords interested persons an
opportunity to comment on the petition.
At the close of the comment period,
NHTSA decides, on the basis of the
petition and any comments that it has
PO 00000
Frm 00114
Fmt 4703
Sfmt 4703
71375
received, whether the vehicle is eligible
for importation. The agency then
publishes this decision in the Federal
Register.
NHTSA was petitioned by a registered
importer to decide whether 1990–1999
Nissan GTS and GTR Passenger cars are
eligible for importation into the United
States. To afford an opportunity for
public comment, NHTSA published
notice of this petition under Docket
Number NHTSA–99–5507 on April 16,
1999 (64 FR 18963). As stated in the
notice, the petitioner claimed that 1990–
1999 Nissan GTS and GTR passenger
cars have safety features that comply
with many standards that apply to
passenger cars of the model years in
question, and are capable of being
altered to comply with other applicable
standards. With respect to FMVSS No.
208 Occupant Crash Protection, the
petitioner stated that the driver’s air
bags on 1990–1993 models, and the
driver and passenger’s air bags on 1994–
1999 models, would need to be replaced
with components manufactured to
petitioner’s specifications based on the
results of dynamic tests conducted by
MGA Research Corporation. As
indicated by the petitioner, these tests
were conducted after it had made
certain structural modifications to the
vehicles.
No comments were received in
response to the notice of petition. Based
on its review of the information
submitted by the petitioner, NHTSA
granted the petition on November 15,
1999, and assigned Vehicle Eligibility
Number VCP–17 to vehicles admissible
under its decision. The agency
published notice of the decision on
January 19, 2000 (65 FR 3002).
The agency has obtained information
from Nissan North America, Inc., on
behalf of Nissan Motor Company, LTD
(Nissan) of Tokyo, Japan, the
manufacturer of Nissan 1990–1999
Nissan GTS and GTR passenger cars.
Nissan informed the agency that it
manufactured three distinct GTS and
GTR models from 1990 to 1999,
designated as the R32, the R33, and the
R34 models, respectively. Nissan stated
that the R32, the R33, and the R34
models differ in terms of their
‘‘structural design and restraint
performance,’’ and that each of the
models, which followed a chronological
sequence, was ‘‘newly designed and
different from the type preceding it.’’
Nissan confirmed that the company
received official type approval from the
Japanese government for each model
separately, and that it was ‘‘highly likely
that each model type would perform
differently in the crash tests required by
the FMVSS.’’
E:\FR\FM\28NON1.SGM
28NON1
71376
Federal Register / Vol. 70, No. 227 / Monday, November 28, 2005 / Notices
Nissan also provided a chart showing
production ‘‘start’’ and ‘‘end’’ dates for
the R32, the R33, and the R34 models.
The R32 models were manufactured
from May 1989 through November 1994;
the R33 models were manufactured
from August 1993 through June 1998;
and the R34 models were manufactured
from November 1997 through August
2002. Included in the chart is
information identifying the production
‘‘start’’ dates when air bags were offered
as an option and as standard equipment
at both the driver and the front
passenger’s seating positions on the
R32, the R33, and the R34 model
vehicles.
The agency did not have this
information from Nissan at the time of
its original decision to grant import
eligibility to 1990–1999 Nissan GTS and
GTR passenger cars. Instead, the agency
heavily relied on the results of static
and dynamic tests on two modified
1996 R33 model vehicles, which, in its
overall context, the original petition
suggested were representative. As
indicated in the original petition, the
petitioner had made structural
modifications to these two vehicles and
replaced the air bags at the driver’s and
the front passenger’s seating positions
with components manufactured to its
own specifications. The petitioner did
not demonstrate full compliance with
the performance requirements of
FMVSS 208 and other crashworthiness
standards (e.g., FMVSS Nos. 210 Seat
Belt Assembly Anchorages, 212
Windshield Mounting and 301 Fuel
System Integrity) for R32 and R34
models because no test data was
provided to the agency.
The agency’s decision to grant import
eligibility to 1990–1999 Nissan GTS and
GTR passenger cars also relied on the
petitioner’s assertion that the original
equipment driver’s air bag on 1990–
1993 models, and the driver and
passenger’s air bags on 1994–1999
models would be replaced with
components manufactured to the
petitioner’s specifications.
However, the air bag production chart
provided by Nissan shows that no
driver’s air bags were available in the
R32 GTS model until August 1991. For
the R32 GTR model, no driver’s air bag
was offered until February 1994, and it
was then offered only as optional
equipment. Nissan did not offer
passenger’s air bags in the R32 model.
Nissan began production of the R33
model in August 1993, offering both
driver and passenger’s air bags as
optional equipment on the GTS model.
It was not until January 1995 that a
driver’s air bag was offered on the GTR
model. As of January 1995, the driver’s
VerDate Aug<31>2005
15:28 Nov 25, 2005
Jkt 208001
air bag became standard on both GTS
and GTR models. One year later, in
January 1996, the passenger’s air bag
became standard on both GTS and GTR
models.
Nissan has informed the agency that
it does not possess records that would
allow it to determine whether any
individual vehicle had the air bags
installed when those air bags were
offered as optional equipment. The
agency can only be assured that R33
vehicles, produced by Nissan beginning
in January 1996, will have both driver
and passenger’s air bags installed as
original equipment.
On the basis of the foregoing, NHTSA
has tentatively concluded that the
original grant of eligibility to the 1990–
1999 Nissan GTS and GTR passenger
cars, comprising R32, R33, and R34
model vehicles, was overly broad. As a
consequence, the agency has tentatively
decided to rescind that decision in part.
If it makes this rescission, only Nissan
R33 model GTS and GTR passenger cars
manufactured between January 1996
and June 1998 will be eligible for
importation in the future.
Vehicle Eligibility Number
The importer of a vehicle admissible
under any import eligibility decision
must enter on the HS–7 Declaration
form covering the entry the appropriate
vehicle eligibility number indicating
that the vehicle is eligible for
importation. Vehicle eligibility number
VCP–17 is currently assigned to 1990–
1999 Nissan GTS and GTR passenger
cars. If this tentative decision is made
final, NHTSA will rescind that
eligibility number and assign a new
eligibility number to Nissan GTS and
GTR passenger cars manufactured
between January 1996 and June 1998
that are to remain eligible for
importation.
Interested persons are invited to
submit comments on the tentative
decision described above. Comments
should refer to the docket number and
be submitted to: Docket Management,
Room PL–401, 400 Seventh St., SW.,
Washington, DC 20590. It is requested
but not required that 10 copies be
submitted.
All comments received before the
close of business on the closing date
indicated above will be considered, and
will be available for examination in the
docket at the above address both before
and after that date. To the extent
possible, comments filed after the
closing date will also be considered.
Notice of final action will be published
in the Federal Register pursuant to the
authority indicated below.
PO 00000
Frm 00115
Fmt 4703
Sfmt 4703
Authority: 49 U.S.C. 30141(a)(1)(B) and
(b)(1); 49 CFR 593.8; delegations of authority
at 49 CFR 1.50 and 501.8.
Issued on: November 21, 2005.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E5–6530 Filed 11–25–05; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF THE TREASURY
Internal Revenue Service
Privacy Act of 1974; as Amended
Internal Revenue Service,
Treasury.
ACTION: Notice of alteration of Privacy
Act system of records.
AGENCY:
SUMMARY: The Treasury Department,
Internal Revenue Service, gives notice of
a proposed alteration to the system of
records entitled, ‘‘Treasury/IRS
34.022—National Background
Investigation Center Management
Information System,’’ which is subject
to the Privacy Act of 1974, as amended,
5 U.S.C. 552a.
DATES: Comments must be received no
later than December 28, 2005. The
alteration will be effective January 9,
2006 unless comments are received that
would result in a contrary
determination.
Comments should be sent to
the Office of Governmental Liaison &
Disclosure, Internal Revenue Service,
1111 Constitution Avenue, NW.,
Washington, DC 20224. Comments will
be made available for public inspection
and copying in the Internal Revenue
Service Freedom of Information Reading
Room, 1111 Constitution Avenue, NW.,
Room 1621, Washington, DC 20224,
telephone number (202) 622–5164, (not
a toll free call).
FOR FURTHER INFORMATION CONTACT:
Mary Anderson, Program Analyst,
Personnel Security Office, Internal
Revenue Service, (703) 647–5477.
SUPPLEMENTARY INFORMATION: The
purpose of the alteration is to reflect
changes in the system name resulting
from system upgrade, system location,
record access procedures, and system
manager. The alteration will more
accurately describe the categories of
individuals and records in the system.
The alteration is also adding a routine
use permitting the disclosure of
information to a contractor. The system
notice was last published in its entirety
in the Federal Register, Vol. 66, Number
237, pages 63817–63818, on December
10, 2001.
ADDRESSES:
E:\FR\FM\28NON1.SGM
28NON1
Agencies
[Federal Register Volume 70, Number 227 (Monday, November 28, 2005)]
[Notices]
[Pages 71375-71376]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E5-6530]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-2005-22654]
Notice of Tentative Decision To Partially Rescind Decision That
Nonconforming 1990-1999 Nissan GTS and GTR Passenger Cars Are Eligible
for Importation
AGENCY: National Highway Traffic Safety Administration (NHTSA), DOT.
ACTION: Notice of tentative decision to partially rescind decision that
nonconforming 1990-1999 Nissan GTS and GTR passenger cars are eligible
for importation.
-----------------------------------------------------------------------
SUMMARY: This document provides notice that NHTSA has tentatively
decided to partially rescind its decision that 1990-1999 Nissan GTS and
GTR passenger cars not originally manufactured to comply with all
applicable Federal motor vehicle safety standards (FMVSS) are eligible
for importation into the United States. If NHTSA makes this rescission,
Nissan R33 model GTS and GTR passenger cars manufactured between
January 1996 and June 1998 would be eligible for importation following
the decision; the others would not be eligible for importation
following the decision.
DATES: The closing date for comments on the tentative decision is
December 28, 2005.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Management, Room PL-401, 400
Seventh St., SW., Washington, DC 20590. [Docket hours are from 9 a.m.
to 5 p.m.] Anyone is able to search the electronic form of all comments
received into any of our dockets by the name of the individual
submitting the comment (or signing the comment, if submitted on behalf
of an association, business, labor union, etc.). You may review DOT's
complete Privacy Act Statement in the Federal Register published on
April 11, 2000 (Volume 65, Number 70; Pages 19477-78) or you may visit
https://dms.dot.gov.
FOR FURTHER INFORMATION CONTACT: Coleman Sachs, Office of Vehicle
Safety Compliance, NHTSA (202-366-3151).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable Federal motor
vehicle safety standards (FMVSS) shall be refused admission into the
United States unless NHTSA has decided that the motor vehicle is
substantially similar to a motor vehicle originally manufactured for
importation into and sale in the United States, certified under 49
U.S.C. 30115, and of the same model year as the model of the motor
vehicle to be compared, and is capable of being readily altered to
conform to all applicable FMVSS. Where there is no substantially
similar U.S.-certified motor vehicle, 49 U.S.C. 30141(a)(1)(B) permits
a nonconforming motor vehicle to be admitted into the United States if
its safety features comply with, or are capable of being altered to
comply with, all applicable FMVSS based on destructive test data or
other evidence (such as an engineering analysis) that NHTSA decides is
adequate.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
NHTSA was petitioned by a registered importer to decide whether
1990-1999 Nissan GTS and GTR Passenger cars are eligible for
importation into the United States. To afford an opportunity for public
comment, NHTSA published notice of this petition under Docket Number
NHTSA-99-5507 on April 16, 1999 (64 FR 18963). As stated in the notice,
the petitioner claimed that 1990-1999 Nissan GTS and GTR passenger cars
have safety features that comply with many standards that apply to
passenger cars of the model years in question, and are capable of being
altered to comply with other applicable standards. With respect to
FMVSS No. 208 Occupant Crash Protection, the petitioner stated that the
driver's air bags on 1990-1993 models, and the driver and passenger's
air bags on 1994-1999 models, would need to be replaced with components
manufactured to petitioner's specifications based on the results of
dynamic tests conducted by MGA Research Corporation. As indicated by
the petitioner, these tests were conducted after it had made certain
structural modifications to the vehicles.
No comments were received in response to the notice of petition.
Based on its review of the information submitted by the petitioner,
NHTSA granted the petition on November 15, 1999, and assigned Vehicle
Eligibility Number VCP-17 to vehicles admissible under its decision.
The agency published notice of the decision on January 19, 2000 (65 FR
3002).
The agency has obtained information from Nissan North America,
Inc., on behalf of Nissan Motor Company, LTD (Nissan) of Tokyo, Japan,
the manufacturer of Nissan 1990-1999 Nissan GTS and GTR passenger cars.
Nissan informed the agency that it manufactured three distinct GTS and
GTR models from 1990 to 1999, designated as the R32, the R33, and the
R34 models, respectively. Nissan stated that the R32, the R33, and the
R34 models differ in terms of their ``structural design and restraint
performance,'' and that each of the models, which followed a
chronological sequence, was ``newly designed and different from the
type preceding it.'' Nissan confirmed that the company received
official type approval from the Japanese government for each model
separately, and that it was ``highly likely that each model type would
perform differently in the crash tests required by the FMVSS.''
[[Page 71376]]
Nissan also provided a chart showing production ``start'' and
``end'' dates for the R32, the R33, and the R34 models. The R32 models
were manufactured from May 1989 through November 1994; the R33 models
were manufactured from August 1993 through June 1998; and the R34
models were manufactured from November 1997 through August 2002.
Included in the chart is information identifying the production
``start'' dates when air bags were offered as an option and as standard
equipment at both the driver and the front passenger's seating
positions on the R32, the R33, and the R34 model vehicles.
The agency did not have this information from Nissan at the time of
its original decision to grant import eligibility to 1990-1999 Nissan
GTS and GTR passenger cars. Instead, the agency heavily relied on the
results of static and dynamic tests on two modified 1996 R33 model
vehicles, which, in its overall context, the original petition
suggested were representative. As indicated in the original petition,
the petitioner had made structural modifications to these two vehicles
and replaced the air bags at the driver's and the front passenger's
seating positions with components manufactured to its own
specifications. The petitioner did not demonstrate full compliance with
the performance requirements of FMVSS 208 and other crashworthiness
standards (e.g., FMVSS Nos. 210 Seat Belt Assembly Anchorages, 212
Windshield Mounting and 301 Fuel System Integrity) for R32 and R34
models because no test data was provided to the agency.
The agency's decision to grant import eligibility to 1990-1999
Nissan GTS and GTR passenger cars also relied on the petitioner's
assertion that the original equipment driver's air bag on 1990-1993
models, and the driver and passenger's air bags on 1994-1999 models
would be replaced with components manufactured to the petitioner's
specifications.
However, the air bag production chart provided by Nissan shows that
no driver's air bags were available in the R32 GTS model until August
1991. For the R32 GTR model, no driver's air bag was offered until
February 1994, and it was then offered only as optional equipment.
Nissan did not offer passenger's air bags in the R32 model. Nissan
began production of the R33 model in August 1993, offering both driver
and passenger's air bags as optional equipment on the GTS model. It was
not until January 1995 that a driver's air bag was offered on the GTR
model. As of January 1995, the driver's air bag became standard on both
GTS and GTR models. One year later, in January 1996, the passenger's
air bag became standard on both GTS and GTR models.
Nissan has informed the agency that it does not possess records
that would allow it to determine whether any individual vehicle had the
air bags installed when those air bags were offered as optional
equipment. The agency can only be assured that R33 vehicles, produced
by Nissan beginning in January 1996, will have both driver and
passenger's air bags installed as original equipment.
On the basis of the foregoing, NHTSA has tentatively concluded that
the original grant of eligibility to the 1990-1999 Nissan GTS and GTR
passenger cars, comprising R32, R33, and R34 model vehicles, was overly
broad. As a consequence, the agency has tentatively decided to rescind
that decision in part. If it makes this rescission, only Nissan R33
model GTS and GTR passenger cars manufactured between January 1996 and
June 1998 will be eligible for importation in the future.
Vehicle Eligibility Number
The importer of a vehicle admissible under any import eligibility
decision must enter on the HS-7 Declaration form covering the entry the
appropriate vehicle eligibility number indicating that the vehicle is
eligible for importation. Vehicle eligibility number VCP-17 is
currently assigned to 1990-1999 Nissan GTS and GTR passenger cars. If
this tentative decision is made final, NHTSA will rescind that
eligibility number and assign a new eligibility number to Nissan GTS
and GTR passenger cars manufactured between January 1996 and June 1998
that are to remain eligible for importation.
Interested persons are invited to submit comments on the tentative
decision described above. Comments should refer to the docket number
and be submitted to: Docket Management, Room PL-401, 400 Seventh St.,
SW., Washington, DC 20590. It is requested but not required that 10
copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action will be published
in the Federal Register pursuant to the authority indicated below.
Authority: 49 U.S.C. 30141(a)(1)(B) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: November 21, 2005.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E5-6530 Filed 11-25-05; 8:45 am]
BILLING CODE 4910-59-P