Princeton University, Notice of Decision on Application for Duty-Free Entry of Scientific Instrument, 61603 [E5-5894]
Download as PDF
<![CDATA[
Federal Register / Vol. 70, No. 205 / Tuesday, October 25, 2005 / Notices
purpose and (2) it knows of no domestic
instrument or apparatus of equivalent
scientific value to the foreign
instrument for the applicant’s intended
use.
We know of no other instrument or
apparatus of equivalent scientific value
to the foreign instrument which is being
manufactured in the United States.
Gerald A. Zerdy,
Program ManagerStatutory Import Programs
Staff.
[FR Doc. E5–5895 Filed 10–24–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
Applications for Duty–Free Entry of
Scientific Instruments
Pursuant to Section 6(c) of the
Educational, Scientific and, Cultural
Materials Importation Act of 1966 (Pub.
L. 89–651; 80 Stat. 897; 15 CFR part
301), we invite comments on the
question of whether an instrument of
equivalent scientific value, for the
purposes for which the instrument
shown below is intended to be used, is
being manufactured in the United
States.
Comments must comply with 15 CFR
301.5(a)(3) and (4) of the regulations and
be filed within 20 days with the
Statutory Import Programs Staff, U.S.
Department of Commerce, Washington,
D.C. 20230. Applications may be
examined between 8:30 A.M. and 5:00
P.M. in Suite 4100W, U.S. Department
of Commerce, Franklin Court Building,
1099 14th Street, NW, Washington, D.C.
Docket Number: 05–037. Applicant:
California Institute of Technology, 1200
E. California Blvd., Pasadena, CA 91125.
Instrument: Dual Beam SEM/FIB
System, Model 200 Nanolab.
Manufacturer: FEI Company, The
Netherlands. Intended Use: The
instrument is intended to be used to
modify and analyze delicate nano–
devices as well as to prepare more
conventional cross-sectional thin
sections for analytical electron
microscopy. The nanostructures to be
modified will largely be developed
within Caltech’s microfabrication
facilitiesand the delivered software
system will be re–written to enable
more precise patterning and alignment
of nanostructures. Metallorganic gases
can be delivered to the sample surface
through a gas manifold for metal
deposition and etching gases can be
injected to perform chemically–assisted
focused ion etching. A laser
VerDate Aug<31>2005
15:53 Oct 24, 2005
Jkt 208001
interferometer stage will enable the
alignment of nanostructures to existing
alignment marks for a flexible
nanofabrication system. A large variety
of chemical analysis sensors will further
extend the capabilities of the
system.Application accepted by
Commissioner of Customs: September
27, 2005.
Docket Number: 05–044. Applicant:
Tufts University, 169 Holland Street,
Somerville, MA 02144. Instrument:
Low-temperature Scanning Tunneling
Microscope. Manufacturer: Omicron
Nanotechnology, Germany. Intended
Use: The instrument is intended to be
used to study molecules adsorbed on
metal and semiconductor surfaces at
low temperature to gain understanding
of the physisorption and chemisorption
processes. The research is intended to:
(1) obtain high–resolution images of
moleculesadsorbed on surfaces at
temperatures down to 4 Kelvin, (2)
record conductance and vibrational data
from these systems using the
microscope’s spectroscopic capabilities
and (3) manipulate the positions of
molecules using the microscope tip.
Application accepted by Commissioner
of Customs: October 5, 2005.
Gerald A. Zerdy,
Program ManagerStatutory Import Programs
Staff.
[FR Doc. E5–5896 Filed 10–24–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
Princeton University, Notice of
Decision on Application for Duty–Free
Entry of Scientific Instrument
This decision is made pursuant to
Section 6(c) of the Educational,
Scientific, and Cultural Materials
Importation Act of 1966 (Pub. L. 89–
651, 80 Stat. 897; 15 CFR part 301).
Related records can be viewed between
8:30 A.M. and 5:00 P.M. in Suite
4100W, U.S. Department of Commerce,
Franklin Court Building, 1099 14th
Street, NW, Washington, D.C.
Docket Number: 05–035. Applicant:
Princeton University, Princeton, New
Jersey. Instrument: Geiger Mode
Ionizing Counters (1350). Manufacturer:
pol.hi.tech, S.R.I, Italy. Intended Use:
See notice at 70 FR 48372, August 17,
2005.
Comments: None received. Decision:
Approved. No instrument of equivalent
scientific value to the foreign
instrument, for such purposes as it is
intended to be used, is being
manufactured in the United States.
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
61603
Reasons: These are compatible
accessories for an existing instrument.
Also referred to as limited streamer
tubes, they are to be interfaced to the
Stanford Linear Accelerator to study all
the systematics of B meson decay
processes by international research
projects. Extreme reliability is an
essential feature, since once assembled,
they cannot be removed for
replacement. The only domestic
assembly facility for producing large
numbers of these devices (at the
University of Houston) has been
decommissioned. The accessories are
pertinent to the intended uses and we
know of no domestic accessories which
can be readily adapted for this purpose.
We know of no other instrument or
apparatus of equivalent scientific value
which is being manufactured in the
United States.
Gerald A. Zerdy,
Program ManagerStatutory Import Programs
Staff.
[FR Doc. E5–5894 Filed 10–24–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
State University of New York, Stony
Brook, et al., Notice of Consolidated
Decision on Applications for Duty–
Free Entry of Electron Microscopes
This is a decision consolidated
pursuant to Section 6(c) of the
Educational, Scientific, and Cultural
Materials Importation Act of 1966 (Pub.
L. 89–651, 80 Stat. 897; 15 CFR part
301). Related records can be viewed
between 8:30 A.M. and 5:00 P.M. in
Suite 4100W, Franklin Court Building,
U.S. Department of Commerce, 1099
14th Street, NW, Washington, D.C.
Docket Number: 05–032. Applicant:
State University of New York, Stony
Brook. Instrument: Electron Microscope,
Model JEM–2200FS. Manufacturer:
JEOL Ltd., Japan. Intended Use: See
notice at 70 FR 48372, August 17, 2005.
Order Date: September 2, 2003.
Docket Number: 05–034. Applicant:
The University of Southern Mississippi,
Hattiesburg. Instrument: Electron
Microscope, Model JEM–2100.
Manufacturer: JEOL, Ltd., Japan.
Intended Use:See notice at 70 FR 48372,
August 17, 2005. Order Date: October
13, 2004.
Comments: None received. Decision:
Approved. No instrument of equivalent
scientific value to the foreign
instrument, for such purposes as these
instruments are intended to be used,
was being manufactured in the United
E:\FR\FM\25OCN1.SGM
25OCN1
]]>Agencies
[Federal Register Volume 70, Number 205 (Tuesday, October 25, 2005)]
[Notices]
[Page 61603]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E5-5894]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Princeton University, Notice of Decision on Application for Duty-
Free Entry of Scientific Instrument
This decision is made pursuant to Section 6(c) of the Educational,
Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89-
651, 80 Stat. 897; 15 CFR part 301). Related records can be viewed
between 8:30 A.M. and 5:00 P.M. in Suite 4100W, U.S. Department of
Commerce, Franklin Court Building, 1099 14th Street, NW, Washington,
D.C.
Docket Number: 05-035. Applicant: Princeton University, Princeton,
New Jersey. Instrument: Geiger Mode Ionizing Counters (1350).
Manufacturer: pol.hi.tech, S.R.I, Italy. Intended Use: See notice at 70
FR 48372, August 17, 2005.
Comments: None received. Decision: Approved. No instrument of
equivalent scientific value to the foreign instrument, for such
purposes as it is intended to be used, is being manufactured in the
United States. Reasons: These are compatible accessories for an
existing instrument. Also referred to as limited streamer tubes, they
are to be interfaced to the Stanford Linear Accelerator to study all
the systematics of B meson decay processes by international research
projects. Extreme reliability is an essential feature, since once
assembled, they cannot be removed for replacement. The only domestic
assembly facility for producing large numbers of these devices (at the
University of Houston) has been decommissioned. The accessories are
pertinent to the intended uses and we know of no domestic accessories
which can be readily adapted for this purpose. We know of no other
instrument or apparatus of equivalent scientific value which is being
manufactured in the United States.
Gerald A. Zerdy,
Program ManagerStatutory Import Programs Staff.
[FR Doc. E5-5894 Filed 10-24-05; 8:45 am]
BILLING CODE 3510-DS-S
