Certain Cut-to-Length Carbon-Quality Steel Plate from Italy: Final Results of Expedited Sunset Review, 45694-45695 [E5-4259]
Download as PDF
45694
Federal Register / Vol. 70, No. 151 / Monday, August 8, 2005 / Notices
sections 751(c), 752, and 777(i)(1) of the
Act.
Dated: August 1, 2005.
Joseph A. Spetrini,
Acting Assistant Secretary for Import
Administration.
[FR Doc. E5–4258 Filed 8–5–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
International Trade Administration
[C–475–827]
Certain Cut–to-Length Carbon–Quality
Steel Plate from Italy: Final Results of
Expedited Sunset Review
Import Administration,
International Trade Administration,
Department of Commerce.
SUMMARY: On January 3, 2005, the
Department of Commerce (‘‘the
Department’’) initiated a sunset review
of the countervailing duty (‘‘CVD’’)
order on certain cut–to-length carbon–
quality steel plate from Italy pursuant to
section 751(c) of the Tariff Act of 1930,
as amended (‘‘the Act’’). See Initiation
of Five-year (‘‘Sunset’’) Reviews, 70 FR
75 (January 3, 2005) . On the basis of a
notice of intent to participate and an
adequate substantive response filed on
behalf of the domestic interested parties,
as well as inadequate response from
respondent interested parties, the
Department conducted an expedited
sunset review pursuant to section
751(c)(3)(B) of the Act and 19 CFR
351.218(e)(1)(ii)(B). As a result of this
sunset review, the Department finds that
revocation of the CVD order would be
likely to lead to continuation or
recurrence of countervailable subsidies
at the levels indicated in the ‘‘Final
Results of Review’’ section of this
notice.
EFFECTIVE DATE: August 8, 2005.
FOR FURTHER INFORMATION CONTACT:
Tipten Troidl or David Goldberger, AD/
CVD Enforcement, Office 3, Import
Administration, International Trade
Administration, U.S. Department of
Commerce, 14th Street & Constitution
Avenue, NW, Washington, D.C. 20230;
telephone: (202) 482–1767 or (202) 482–
4136, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On January 3, 2005, the Department
initiated a sunset review of the CVD
order on certain cut–to-length carbon–
quality steel plate from Italy pursuant to
section 751(c) of the Act. See Initiation
of Five-year (‘‘Sunset’’) Reviews, 70 FR
75 (January 3, 2005). The Department
VerDate jul<14>2003
20:13 Aug 05, 2005
Jkt 205001
received a Notice of Intent to Participate
from the following domestic interested
parties: Nucor Corporation (‘‘Nucor’’),
Mittal Steel USA ISG Inc. (‘‘Mittal’’)
(formerly International Steel Group
Inc.), IPSCO Steel Inc. (‘‘IPSCO’’), and
United States Steel Corporation (‘‘U.S.
Steel’’) (collectively, ‘‘domestic
interested parties’’) within the deadline
specified in 19 CFR 351.218(d)(1)(i).
The domestic interested parties claimed
interested party status under section
771(9)(C) of the Act. Moreover, the
Department received one complete
collective substantive response from the
domestic interested parties within the
30-day deadline specified in 19 CFR
351.218(d)(3)(i).
The Department also received
responses from: ILVA S.p.A. (‘‘ILVA’’),
the European Commission (‘‘EC’’), and
the Government of Italy (‘‘GOI’’)
(collectively, ‘‘respondent interested
parties’’). The Department found that
ILVA’s imports did not fulfill the 50–
percent threshold that the Department
considers to be an adequate response
under 19 CFR 351.218(e)(1)(ii)(A).
Therefore, on March 23, 2005, the
Department issued a memorandum
finding the respondent’s response
inadequate. See March 23, 2005,
Memorandum for Ronald K. Lorentzen
through Kelly Parkhill from Hilary E.
Sadler, Subject: Carbon–Quality Steel
Plate from Italy: Determination of
Adequacy of Response (‘‘Adequacy
Response Memorandum’’). Because the
Department found that the respondent
interested parties’ responses were
inadequate, the Department conducted
an expedited review of this CVD order,
pursuant to section 751(c)(3)(B) of the
Act and 19 CFR 351.218(e)(1)(ii)(C)(2).
The Department determined, pursuant
to section 751(c)(5)(C) of the Act, that
the sunset review of the CVD order on
certain cut–to-length carbon–quality
steel plate from Italy is extraordinarily
complicated. Therefore, on April 25,
2005, the Department extended the time
limit for completion of the final results
of this review until not later than
August 1, 2005.1
Scope of the Order
The merchandise covered by the CVD
order is certain hot–rolled carbonquality steel: (1) Universal mill plates
(i.e., flat–rolled products rolled on four
faces or in a closed box pass, of a width
exceeding 150 mm but not exceeding
1250 mm, and of a nominal or actual
1 See Certain Cut-To-Length Carbon-Quality Steel
Plate from France, India, Indonesia, Italy, Japan
and Korea; Extension of Final Results of the
Expedited Sunset Reviews of the Antidumping and
Countervailing Duty Orders, 70 FR 22843 (May 3,
2005).
PO 00000
Frm 00053
Fmt 4703
Sfmt 4703
thickness of not less than 4 mm, which
are cut–to-length (not in coils) and
without patterns in relief), of iron or
non–alloy-quality steel; and (2) flatrolled products, hot–rolled, of a
nominal or actual thickness of 4.75 mm
or more and of a width which exceeds
150 mm and measures at least twice the
thickness, and which are cut–to-length
(not in coils). Steel products to be
included in the scope of this order are
of rectangular, square, circular or other
shape and of rectangular or non–
rectangular cross-section where such
non–rectangular cross-section is
achieved subsequent to the rolling
process (i.e., products which have been
‘‘worked after rolling’’)--for example,
products which have been beveled or
rounded at the edges. Steel products
that meet the noted physical
characteristics that are painted,
varnished or coated with plastic or other
non–metallic substances are included
within this scope. Also, specifically
included in this scope are high strength,
low alloy (‘‘HSLA’’) steels. HSLA steels
are recognized as steels with micro–
alloying levels of elements such as
chromium, copper, niobium, titanium,
vanadium, and molybdenum.
Steel products to be included in this
scope, regardless of Harmonized Tariff
Schedule of the United States
(‘‘HTSUS’’) definitions, are products in
which: (1) iron predominates, by
weight, over each of the other contained
elements, (2) the carbon content is two
percent or less, by weight, and (3) none
of the elements listed below is equal to
or exceeds the quantity, by weight,
respectively indicated: 1.80 percent of
manganese, or 1.50 percent of silicon, or
1.00 percent of copper, or 0.50 percent
of aluminum, or 1.25 percent of
chromium, or 0.30 percent of cobalt, or
0.40 percent of lead, or 1.25 percent of
nickel, or 0.30 percent of tungsten, or
0.10 percent of molybdenum, or 0.10
percent of niobium, or 0.41 percent of
titanium, or 0.15 percent of vanadium,
or 0.15 percent zirconium. All products
that meet the written physical
description, and in which the chemistry
quantities do not equal or exceed any
one of the levels listed above, are within
the scope of these investigations unless
otherwise specifically excluded. The
following products are specifically
excluded from these investigations: (1)
products clad, plated, or coated with
metal, whether or not painted,
varnished or coated with plastic or other
non–metallic substances; (2) SAE grades
(formerly AISI grades) of series 2300
and above; (3) products made to ASTM
A710 and A736 or their proprietary
equivalents; (4) abrasion- resistant steels
E:\FR\FM\08AUN1.SGM
08AUN1
Federal Register / Vol. 70, No. 151 / Monday, August 8, 2005 / Notices
(i.e., USS AR 400, USS AR 500); (5)
products made to ASTM A202, A225,
A514 grade S, A517 grade S, or their
proprietary equivalents; (6) ball bearing
steels; (7) tool steels; and (8) silicon
manganese steel or silicon electric steel.
The merchandise subject to the order is
currently classifiable in the HTSUS
under subheadings: 7208.40.3030,
7208.40.3060, 7208.51.0030,
7208.51.0045, 7208.51.0060,
7208.52.0000, 7208.53.0000,
7208.90.0000, 7210.70.3000,
7210.90.9000, 7211.13.0000,
7211.14.0030, 7211.14.0045,
7211.90.0000, 7212.40.1000,
7212.40.5000, 7212.50.0000,
7225.40.3050, 7225.40.7000,
7225.50.6000, 7225.99.0090,
7226.91.5000, 7226.91.7000,
7226.91.8000, 7226.99.0000. Although
the HTSUS subheadings are provided
for convenience and customs purposes,
the written description of the
merchandise subject to this order.
of their responsibility concerning the
return or destruction of proprietary
information disclosed under APO in
accordance with 19 CFR 351.305.
Timely notification of return/
destruction of APO materials or
conversion to judicial protective order is
hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation. We are
issuing and publishing the results and
notice in accordance with sections
751(c), 752, and 777(i)(1) of the Act.
Analysis of Comments Received
All issues raised in this review are
addressed in the Issues and Decision
Memorandum (‘‘Decision
Memorandum’’) from Barbara E.
Tillman, Acting Deputy Assistant
Secretary for Import Administration, to
Joseph A. Spetrini, Acting Assistant
Secretary for Import Administration,
dated August 1, 2005, which is hereby
adopted by this notice. Parties can find
a complete discussion of all issues
raised in this review and the
corresponding recommendation in this
public memorandum which is on file in
the Central Records Unit, room B–099 of
the main Commerce building. In
addition, a complete version of the
Decision Memorandum can be accessed
directly on the Web at https://
ia.ita.doc.gov/frn. The paper copy and
electronic version of the Decision
Memorandum are identical in content.
[Docket No. 041029298–5209–04; I.D.
052004A]
Dated: August 1, 2005.
Joseph A. Spetrini,
Acting Assistant Secretary for Import
Administration.
[FR Doc. E5–4259 Filed 8–5–05; 8:45 am]
BILLING CODE 3510–DS–S
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–AS38
Magnuson-Stevens Act Provisions;
Fishing Capacity Reduction Program;
Pacific Coast Groundfish Fishery;
California, Washington, and Oregon
Fisheries for Coastal Dungeness Crab
and Pink Shrimp
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration,
Commerce.
ACTION: Notice of fee effective date.
AGENCY:
SUMMARY: NMFS issues this establishing
the effective date of fees for repaying the
$35,662,471 reduction loan financing
the Pacific Coast groundfish fishing
capacity reduction program.
DATES: The groundfish program fee
payment collection will begin on
Final Results of Review
September 8, 2005.
The Department determines that
ADDRESSES: Send questions about this
revocation of the CVD order would be
notice to Michael L. Grable, Chief,
likely to lead to continuation or
Financial Services Division, National
recurrence of a countervailable subsidy
Marine Fisheries Service, 1315 Eastat the rates listed below:
West Highway, Silver Spring, MD
20910–3282.
Net Countervailable
Producers/Exporters
FOR FURTHER INFORMATION CONTACT:
Subsidy (percent)
Michael L. Grable, (301) 713–2390.
ILVA S.p.A. ...................
2.38 SUPPLEMENTARY INFORMATION:
Palini & Bertoli ..............
All Others ......................
De minimis
2.38
Notification Regarding Administrative
Protective Order
This notice serves as the only
reminder to parties subject to
administrative protective order (‘‘APO’’)
VerDate jul<14>2003
20:13 Aug 05, 2005
Jkt 205001
I. Background
Sections 312(b)-(e) of the MagnusonStevens Fishery Conservation and
Management Act (16 U.S.C. 1861a(b)
through (e)) is the general authority for
fishing capacity reduction programs. In
particular, section 312(d) authorizes
PO 00000
Frm 00054
Fmt 4703
Sfmt 4703
45695
industry fee systems for repaying
reduction loans which finance
reduction program costs.
Subpart L of 50 CFR part 600 is the
framework rule generally implementing
section 312(b)-(e).
Sections 1111 and 1112 of the
Merchant Marine Act, 1936 (46 App.
U.S.C. 1279f and 1279g) generally
authorizes loans financing reduction
programs.
Enacted on February 20, 2003, section
212 of Division B, Title II, of Public Law
108–7 (section 212) specifically
authorizes a fishing capacity reduction
program for that portion of the limited
entry trawl fishery under the Pacific
Coast Groundfish Fishery Management
Plan whose permits, excluding those
registered to whiting catcher-processors
are endorsed for trawl gear operation.
This is the program’s reduction fishery.
The groundfish reduction program’s
objective was to reduce the number of
vessels and permits endorsed for the
operation of groundfish trawl gear. The
program also involved corollary fishing
capacity reduction in the California,
Oregon, and Washington fisheries for
Dungeness crab and pink shrimp. These
are the program’s fee-share fisheries.
All post-reduction fish landings from
the reduction fishery and the six feeshare fisheries are subject to the
groundfish program’s fee. The object of
this notice is to establish the effective
date of the fee which fish sellers must
pay and fish buyers must collect on all
fee fish landed from these seven
fisheries.
NMFS implemented the groundfish
program by Federal Register
notification (rather than by the more
usual regulatory method). NMFS
proposed the implementing notice on
May 28, 2003 (68 FR 31653) and
published the final notice on July 18,
2003 (68 FR 42613). Please refer to the
final notice for groundfish program
details.
NMFS allocated the $35,662,471
reduction loan to the reduction fishery
and to each of the six fee-share fisheries
as follows:
1. Reduction fishery, $28,428,719; and
2. Fee-share fisheries:
a. California coastal Dungeness crab
fishery, $2,334,334,
b. California pink shrimp fishery,
$674,202,
c. Oregon coastal Dungeness crab
fishery, $1,367,545,
d. Oregon pink shrimp fishery,
$2,228,845,
e. Washington coastal Dungeness crab
fishery, $369,426, and
f. Washington pink shrimp fishery,
$259,400.
Each of these allocations became a
reduction loan subamount repayable by
E:\FR\FM\08AUN1.SGM
08AUN1
Agencies
[Federal Register Volume 70, Number 151 (Monday, August 8, 2005)]
[Notices]
[Pages 45694-45695]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: E5-4259]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[C-475-827]
Certain Cut-to-Length Carbon-Quality Steel Plate from Italy:
Final Results of Expedited Sunset Review
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
SUMMARY: On January 3, 2005, the Department of Commerce (``the
Department'') initiated a sunset review of the countervailing duty
(``CVD'') order on certain cut-to-length carbon-quality steel plate
from Italy pursuant to section 751(c) of the Tariff Act of 1930, as
amended (``the Act''). See Initiation of Five-year (``Sunset'')
Reviews, 70 FR 75 (January 3, 2005) . On the basis of a notice of
intent to participate and an adequate substantive response filed on
behalf of the domestic interested parties, as well as inadequate
response from respondent interested parties, the Department conducted
an expedited sunset review pursuant to section 751(c)(3)(B) of the Act
and 19 CFR 351.218(e)(1)(ii)(B). As a result of this sunset review, the
Department finds that revocation of the CVD order would be likely to
lead to continuation or recurrence of countervailable subsidies at the
levels indicated in the ``Final Results of Review'' section of this
notice.
EFFECTIVE DATE: August 8, 2005.
FOR FURTHER INFORMATION CONTACT: Tipten Troidl or David Goldberger, AD/
CVD Enforcement, Office 3, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street & Constitution
Avenue, NW, Washington, D.C. 20230; telephone: (202) 482-1767 or (202)
482-4136, respectively.
SUPPLEMENTARY INFORMATION:
Background
On January 3, 2005, the Department initiated a sunset review of the
CVD order on certain cut-to-length carbon-quality steel plate from
Italy pursuant to section 751(c) of the Act. See Initiation of Five-
year (``Sunset'') Reviews, 70 FR 75 (January 3, 2005). The Department
received a Notice of Intent to Participate from the following domestic
interested parties: Nucor Corporation (``Nucor''), Mittal Steel USA ISG
Inc. (``Mittal'') (formerly International Steel Group Inc.), IPSCO
Steel Inc. (``IPSCO''), and United States Steel Corporation (``U.S.
Steel'') (collectively, ``domestic interested parties'') within the
deadline specified in 19 CFR 351.218(d)(1)(i). The domestic interested
parties claimed interested party status under section 771(9)(C) of the
Act. Moreover, the Department received one complete collective
substantive response from the domestic interested parties within the
30-day deadline specified in 19 CFR 351.218(d)(3)(i).
The Department also received responses from: ILVA S.p.A.
(``ILVA''), the European Commission (``EC''), and the Government of
Italy (``GOI'') (collectively, ``respondent interested parties''). The
Department found that ILVA's imports did not fulfill the 50-percent
threshold that the Department considers to be an adequate response
under 19 CFR 351.218(e)(1)(ii)(A). Therefore, on March 23, 2005, the
Department issued a memorandum finding the respondent's response
inadequate. See March 23, 2005, Memorandum for Ronald K. Lorentzen
through Kelly Parkhill from Hilary E. Sadler, Subject: Carbon-Quality
Steel Plate from Italy: Determination of Adequacy of Response
(``Adequacy Response Memorandum''). Because the Department found that
the respondent interested parties' responses were inadequate, the
Department conducted an expedited review of this CVD order, pursuant to
section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2).
The Department determined, pursuant to section 751(c)(5)(C) of the
Act, that the sunset review of the CVD order on certain cut-to-length
carbon-quality steel plate from Italy is extraordinarily complicated.
Therefore, on April 25, 2005, the Department extended the time limit
for completion of the final results of this review until not later than
August 1, 2005.\1\
---------------------------------------------------------------------------
\1\ See Certain Cut-To-Length Carbon-Quality Steel Plate from
France, India, Indonesia, Italy, Japan and Korea; Extension of Final
Results of the Expedited Sunset Reviews of the Antidumping and
Countervailing Duty Orders, 70 FR 22843 (May 3, 2005).
---------------------------------------------------------------------------
Scope of the Order
The merchandise covered by the CVD order is certain hot-rolled
carbon- quality steel: (1) Universal mill plates (i.e., flat-rolled
products rolled on four faces or in a closed box pass, of a width
exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual
thickness of not less than 4 mm, which are cut-to-length (not in coils)
and without patterns in relief), of iron or non-alloy-quality steel;
and (2) flat- rolled products, hot-rolled, of a nominal or actual
thickness of 4.75 mm or more and of a width which exceeds 150 mm and
measures at least twice the thickness, and which are cut-to-length (not
in coils). Steel products to be included in the scope of this order are
of rectangular, square, circular or other shape and of rectangular or
non-rectangular cross-section where such non-rectangular cross-section
is achieved subsequent to the rolling process (i.e., products which
have been ``worked after rolling'')--for example, products which have
been beveled or rounded at the edges. Steel products that meet the
noted physical characteristics that are painted, varnished or coated
with plastic or other non-metallic substances are included within this
scope. Also, specifically included in this scope are high strength, low
alloy (``HSLA'') steels. HSLA steels are recognized as steels with
micro-alloying levels of elements such as chromium, copper, niobium,
titanium, vanadium, and molybdenum.
Steel products to be included in this scope, regardless of
Harmonized Tariff Schedule of the United States (``HTSUS'')
definitions, are products in which: (1) iron predominates, by weight,
over each of the other contained elements, (2) the carbon content is
two percent or less, by weight, and (3) none of the elements listed
below is equal to or exceeds the quantity, by weight, respectively
indicated: 1.80 percent of manganese, or 1.50 percent of silicon, or
1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of
chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25
percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of
molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or
0.15 percent of vanadium, or 0.15 percent zirconium. All products that
meet the written physical description, and in which the chemistry
quantities do not equal or exceed any one of the levels listed above,
are within the scope of these investigations unless otherwise
specifically excluded. The following products are specifically excluded
from these investigations: (1) products clad, plated, or coated with
metal, whether or not painted, varnished or coated with plastic or
other non-metallic substances; (2) SAE grades (formerly AISI grades) of
series 2300 and above; (3) products made to ASTM A710 and A736 or their
proprietary equivalents; (4) abrasion- resistant steels
[[Page 45695]]
(i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225,
A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball
bearing steels; (7) tool steels; and (8) silicon manganese steel or
silicon electric steel. The merchandise subject to the order is
currently classifiable in the HTSUS under subheadings: 7208.40.3030,
7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000,
7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000,
7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000,
7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090,
7226.91.5000, 7226.91.7000, 7226.91.8000, 7226.99.0000. Although the
HTSUS subheadings are provided for convenience and customs purposes,
the written description of the merchandise subject to this order.
Analysis of Comments Received
All issues raised in this review are addressed in the Issues and
Decision Memorandum (``Decision Memorandum'') from Barbara E. Tillman,
Acting Deputy Assistant Secretary for Import Administration, to Joseph
A. Spetrini, Acting Assistant Secretary for Import Administration,
dated August 1, 2005, which is hereby adopted by this notice. Parties
can find a complete discussion of all issues raised in this review and
the corresponding recommendation in this public memorandum which is on
file in the Central Records Unit, room B-099 of the main Commerce
building. In addition, a complete version of the Decision Memorandum
can be accessed directly on the Web at https://ia.ita.doc.gov/frn. The
paper copy and electronic version of the Decision Memorandum are
identical in content.
Final Results of Review
The Department determines that revocation of the CVD order would be
likely to lead to continuation or recurrence of a countervailable
subsidy at the rates listed below:
------------------------------------------------------------------------
Net
Producers/Exporters Countervailable
Subsidy (percent)
------------------------------------------------------------------------
ILVA S.p.A.......................................... 2.38
Palini & Bertoli.................................... De minimis
All Others.......................................... 2.38
------------------------------------------------------------------------
Notification Regarding Administrative Protective Order
This notice serves as the only reminder to parties subject to
administrative protective order (``APO'') of their responsibility
concerning the return or destruction of proprietary information
disclosed under APO in accordance with 19 CFR 351.305. Timely
notification of return/destruction of APO materials or conversion to
judicial protective order is hereby requested. Failure to comply with
the regulations and the terms of an APO is a sanctionable violation. We
are issuing and publishing the results and notice in accordance with
sections 751(c), 752, and 777(i)(1) of the Act.
Dated: August 1, 2005.
Joseph A. Spetrini,
Acting Assistant Secretary for Import Administration.
[FR Doc. E5-4259 Filed 8-5-05; 8:45 am]
BILLING CODE 3510-DS-S