Integrity Management Notifications for Gas Transmission Lines, 43939-43941 [05-15022]
Download as PDF
Federal Register / Vol. 70, No. 145 / Friday, July 29, 2005 / Notices
Substantially Similar U.S.—Certified
Vehicles: 1991 Mercedes Benz 560 SEL
Passenger Cars.
Notice of Petition Published at: 70 FR
30182 (May 25, 2005).
Vehicle Eligibility Number: VSP–469
(effective date July 6, 2005).
8. Docket No. NHTSA–2005–21010:
Nonconforming Vehicles: 2002–2003
Hobby Wohnwagenwerk Exclusive 650
KMFE Trailers.
Because there are no substantially similar
U.S.-certified versions of the 2002–2003
Hobby Wohnwagenwerk Exclusive 650
KMFE Trailers, the petitioner sought import
eligibility under 49 U.S.C. 30141(a)(1)(B).
Notice of Petition Published at: 70 FR
20797 (April 21, 2005).
Vehicle Eligibility Number: VCP–29
(effective date June 15, 2005).
9. Docket No. NHTSA–2005–21334:
Nonconforming Vehicles: 2005 Smart Car
Fortwo Coupe & Cabriolet, (including trim
levels Passion, Pulse and Pure) Passenger
Cars.
Because there are no substantially similar
U.S.-certified versions of the 2005 Smart Car
Fortwo Coupe & Cabriolet, (including trim
levels Passion, Pulse and Pure) Passenger
Cars, the petitioner sought import eligibility
under 49 U.S.C. 30141(a)(1)(B).
Notice of Petition Published at: 70 FR
32701 (June 3, 2005).
Vehicle Eligibility Number: VCP–30
(effective date July 14, 2005).
[FR Doc. 05–14974 Filed 7–28–05; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials
Safety Administration
OPS’
safety regulations for managing the
integrity of gas transmission lines (49
CFR part 192, subpart O) require
operators to notify OPS and certain state
pipeline safety agencies whenever the
operators significantly change their
integrity management programs (49 CFR
192.909(b)). Notifications are also
required before operators can use
technology other than in-line
inspection, pressure testing, or direct
assessment to assess pipeline integrity
(49 CFR 192.921(a) (4) and 192.937(c)
(4)). Notifications are required when
operators cannot meet the schedule
required for remediation of anomalous
conditions and safety is not otherwise
provided (49 CFR 192.933(c)).
OPS and state agencies review the
notifications to assure compliance of the
underlying actions with applicable
integrity management requirements in
Subpart O of Part 192. The following
Advisory Bulletin provides additional
details regarding this notification and
review process.
SUPPLEMENTARY INFORMATION:
Advisory Bulletin (ADB–05–04)
To: Operators of gas transmission
lines.
Subject: Notifications required by the
integrity management regulations in 49
CFR part 192, subpart O.
Purpose: To provide guidance on
notifying OPS and state agencies and
information about OPS’s review of the
notifications.
Advisory
Introduction
Integrity Management Notifications for
Gas Transmission Lines
Office of Pipeline Safety (OPS),
Pipeline and Hazardous Materials Safety
Administration (PHMSA), DOT.
AGENCY:
ACTION:
Notice of advisory bulletin.
SUMMARY: Current regulations require
operators to notify OPS and state
pipeline safety agencies of certain
events related to integrity management
programs for gas transmission lines.
This bulletin provides guidance on
notifying OPS and state agencies and
describes OPS’ review of notifications.
OPS expects this bulletin to improve the
efficiency of the notification and review
process.
FOR FURTHER INFORMATION CONTACT:
Zach Barrett by phone at (405) 954–5559
or by e-mail at zbarrett@tsi.jccbi.gov,
regarding the subject matter of this
guidance. General information about the
PHMSA/OPS programs may be obtained
by accessing OPS’s Home page at
https://OPS.dot.gov.
VerDate jul<14>2003
17:05 Jul 28, 2005
Jkt 205001
The integrity management regulations
for gas transmission lines (49 CFR part
192, subpart O) require that operators
notify OPS of each of the following
events:
1. When operators make changes to
their integrity management programs
that may substantially affect the
program’s implementation or may
significantly modify the program or
schedule for carrying out the program
elements (49 CFR 192.909(b)).
2. When operators plan to use
technology other than in-line
inspection, pressure testing, or direct
assessment to perform assessments of
pipeline integrity (49 CFR 192.921(a)(4)
and 192.937(c)(4)).
3. When operators cannot meet the
schedule required by the rule for
remediating any identified condition
and cannot provide safety through a
temporary reduction in operating
pressure or other action (49 CFR
192.933(c)).
In addition, operators must send
notifications of these events to each
PO 00000
Frm 00103
Fmt 4703
Sfmt 4703
43939
state or local pipeline safety agency that
either regulates the safety of the
transmission line involved or inspects
the line under an interstate agent
agreement with OPS. Operators may
notify OPS by mail, facsimile, or the online database (49 CFR 192.949).
Notification of state agencies should be
done according to state agency
procedures.
The following sections of this
advisory bulletin provide guidance on
notifying OPS and state agencies and
explain OPS’s review of notifications.
The bulletin gives special attention to
notifications concerning ‘‘other
technology’’—particularly guided wave
ultrasound—and scheduling problems.
OPS developed the bulletin based on its
experience with Subpart O notifications.
Notifying OPS
As provided by § 192.949, operators
may notify OPS by mail, facsimile, or
via the Web at https://
primis.rspa.dot.gov/gasimp/. The Web
option is OPS’s preferred method of
receiving notifications because it
enables operators to enter information
directly into the Integrity Management
Database (IMDB). (Note that as a result
of the recent creation of the Pipeline
and Hazardous Materials Safety
Administration within DOT, a new Web
address, https://primis.phmsa.dot.gov/
gasimp, was established. The old
address will continue to work for some
time, and OPS plans to revise § 192.949
to include the new address.)
OPS uses the IMDB to coordinate its
review of notifications among its
regional offices and with state pipeline
safety agencies. OPS transfers
notifications submitted via other means
to the IMDB, with the attendant
possibility for error.
Operators desiring to notify OPS via
the Web should go to the specified Web
address and select ‘‘Notifications’’ from
the topic links in the left-hand frame.
This will open a page with instructions
for submitting notifications and for
downloading a Microsoft Word template
for use in stating each notification.
Operators can download the template
from the link within the section of this
Web page entitled ‘‘How to: Download
and Use the Notification Template.’’
(Some users may have to scroll down
the page to see this section). As
described further in the downloading
instructions, an operator can use the
template on a local computer system to
create a Word document that includes
the notification and a table for entering
pipeline data. Although OPS does not
require operators to submit this data
with the notification, OPS believes it
would facilitate its review of the
E:\FR\FM\29JYN1.SGM
29JYN1
43940
Federal Register / Vol. 70, No. 145 / Friday, July 29, 2005 / Notices
notification. OPS may request the data
if it has additional questions after its
initial review of the notification. The
document can be printed, circulated for
review, and used to obtain any
approval/concurrences the operator
requires.
Once the Word document is ready for
submission, an operator should return
to the Web site and again select
‘‘Notifications.’’ On the notifications
page within both the instructions for
submitting notifications and the
instructions for downloading the
template, operators will find a link to an
‘‘upload/submission form.’’ Operators
should click on that link to open the
Notification Submittal Form. This is a
simple form, requiring only a few pieces
of identifying information:
• First, the operator must select from
one of the three ‘‘types’’ of notifications:
substantive program change, other
technology, and remediation/repair.
• Next, the operator enters identifying
information including the operator
name and ID number and the name, job
title, e-mail address, and telephone
number of the person making the
submission.
• The operator must then click
‘‘Browse’’ in the ‘‘Upload File
Attachment’’ section of the ‘‘File
Attachment and Additional Comments’’
portion of the form. This will open a file
selection window like those used by all
Microsoft programs to locate and open
files. The operator will navigate to the
file in its local computer file system and
click ‘‘Open’’ to attach it to the
submission form.
• Finally, the operator can enter any
additional comments in the field
provided, although comments are not
required to be included.
When the form is complete, including
the file attachment, the operator clicks
‘‘Save’’ to upload the form and its
attached file into the IMDB.
Operators can also e-mail completed
Word documents to
Clearinghouse@cycla.com, as described
in the instructions. Operator e-mails
should include the name of the
operator, its OPID number, and the
name, title, telephone number, and
e-mail address of an operator contact for
each notification.
Operators who use the other two
methods of submitting notifications—
mail and facsimile—should clearly
identify the notification as ‘‘Subpart O
Integrity Management Notification.’’
Operators should also include the name
of a contact person, including the
contact’s e-mail address. (OPS will use
this address to communicate the status
of a notification’s review).
VerDate jul<14>2003
17:05 Jul 28, 2005
Jkt 205001
Notifying State Agencies
State pipeline safety agencies have a
significant role in assuring compliance
of gas transmission lines with the
Subpart O integrity management
regulations and in reviewing Subpart O
notifications. Agencies that regulate the
safety of intrastate lines have primary
responsibility for reviewing
notifications concerning transmission
lines they oversee. Agencies that inspect
interstate lines under agreements with
OPS send comments on notifications
concerning these lines to OPS, which
has primary responsibility for reviewing
the notifications.
Thus, when a state agency is involved
in the review, it is important that
operators send notifications directly to
that state agency as Subpart O requires.
However, experience to date shows that
operators often overlook the
requirement to send notifications to
state agencies. Simply notifying OPS
does not satisfy the requirement to
notify appropriate state agencies.
For each notification OPS receives, it
is also important for OPS to know if a
state agency has a role in overseeing the
line involved in the notification. If a
notification sent to OPS does not
indicate the state in which the line is
located and whether the line is
interstate or intrastate, OPS will have to
ascertain this information and may
contact the operator for assistance.
Review of Notifications by OPS
OPS does not treat integrity
management notifications as petitions
for approval of the underlying actions.
Subpart O regulations do not require
such approval. Rather, OPS uses the
notifications to determine if further
review is needed to verify that the
actions described in the notifications are
consistent with safety and the Subpart
O regulations.
The form of review depends on
whether the transmission line involved
is under direct state or OPS safety
oversight. For intrastate transmission
lines regulated directly by a state
pipeline safety agency, the state agency
conducts the review under its own
procedures. OPS enters notifications
related to these intrastate lines into the
IMDB database, except notifications
entered directly by operators. OPS
enters the results of state reviews in the
same manner as described below for
OPS reviews.
OPS reviews notifications related to
all other regulated transmission lines,
i.e., interstate lines and those intrastate
lines not regulated directly by a state
pipeline safety agency. OPS enters the
notifications into the IMDB database,
PO 00000
Frm 00104
Fmt 4703
Sfmt 4703
except those entered by operators
themselves. After OPS begins its review,
the status of the notification in the
database changes from ‘‘submitted’’ to
‘‘under review.’’ If the e-mail address of
an operator’s contact is in the
notification entered in the database, the
contact will receive an automatic e-mail
message of this change in status.
On the basis of information an
operator includes in a notification and
OPS’s familiarity with the action
described in the notification, OPS
decides whether further inspection of
the matter is necessary. If further review
is necessary, OPS enters in the database
that it has ‘‘objections’’ to the action.
Then OPS begins a further review of the
matter by sending a letter to the operator
that states the objections and allows the
operator an opportunity to respond to
the objections. OPS then changes the
status of the notification in the IMDB
database to ‘‘objections noted.’’ If, based
on the operator’s response, OPS decides
that further review of the matter is not
necessary, OPS enters in the database
that it has ‘‘no objections’’ to the action,
but does not send a letter to the
operator. If the e-mail address of an
operator contact is in the database, the
contact will receive an automatic e-mail
message of each change in status.
The gas integrity management Web
page, https://primis.phmsa.dot.gov/
gasimp/, describes this review process
in more detail. A process description,
including a flow chart, can be found in
the ‘‘Key Documents’’ section of that
page. There is also a link to the Key
Documents page in the ‘‘Notifications’’
section.
Notifications Concerning Use of
‘‘Other Technology’’: In order to
expedite any potential review,
notifications concerning use of ‘‘other
technology’’ should include the
following information:
1. The operator’s demonstration that
the ‘‘other technology’’ can provide an
equivalent understanding of the
condition of the line pipe, as required
by 49 CFR 192.921(a)(4) and
192.937(c)(4). The demonstration
should explain the following:
• Where and how the technology will
be used
• What procedures will be followed
• What criteria will apply to data
analysis and evaluation, including
verification excavations and acceptance
and rejection of anomalies
2. Procedures for ensuring that
qualified personnel will implement the
technology, as required by 49 CFR
192.915 and subpart N of part 192.
Various operators have submitted
notifications of their plans to use guided
wave ultrasound as ‘‘other technology’’
E:\FR\FM\29JYN1.SGM
29JYN1
Federal Register / Vol. 70, No. 145 / Friday, July 29, 2005 / Notices
43941
for assessing the integrity of
transmission line segments in casings.
Guided wave ultrasound can be used to
assess pipe for some distance on either
side of a bell hole in which inspection
equipment is located, making the
technology suitable for assessing pipe
within a casing. The technology is
capable of detecting metal loss and of
providing indications of dents, although
sizing of dents is very difficult. OPS has
experience in reviewing notifications on
the use of this technology on hazardous
liquid pipelines and, when satisfied
with the information presented, has
closed these notifications under the
classification ‘‘no objections’’ noted.
OPS understands that the technology’s
performance in specific applications is
critically dependent on the inspection
equipment and procedures used and the
training and qualification of those
involved in its use.
If further review is necessary for
notifications concerning use of guided
wave ultrasound technology, as part of
the equivalency demonstration under 49
CFR 192.921(a)(4) or 192.937(c)(4), OPS
may ask operators to show use of the
technology with inspection equipment
set up in a typical condition of intended
use. This information is especially
important for applications that do not
involve using the technology on both
sides of a casing.
Guided wave ultrasound is capable of
taking readings in both directions from
its placement on a section of line pipe,
as shown by the illustration below. To
validate the technology’s application,
operators should investigate all
indications of potential threats to
pipeline integrity in the opposite
direction of the casing (supplemental
region) and should excavate at least
once in each supplemental region if no
indications of concern are identified.
Indications of welds are one of many
potential readings operators should use
to verify the accuracy of the device.
Operators must demonstrate that all
applications are effective for the type
conditions, equipment, procedures, and
performance measures for detecting the
severity of the anomaly.
Scheduling Problems. If further
review of a notification concerning
failure to meet a remediation schedule
and otherwise provide for public safety
is needed, OPS may ask the operator to
explain why remediation by means
other than pipe replacement or lowering
the pressure is not feasible.
oversight will respond. OPS also
encourages operators to review the
Frequently Asked Questions (FAQ) on
the Web site, which provide the answers
to many common questions.
DEPARTMENT OF TRANSPORTATION
Additional questions concerning
notifications or any aspect of
compliance with Subpart O
requirements can be sent via the
‘‘Question or Comment’’ link on the
public Web site (https://
primis.phmsa.dot.gov/gasimp/). OPS
staff involved in integrity management
VerDate jul<14>2003
17:05 Jul 28, 2005
Jkt 205001
BILLING CODE 4910–60–P
PO 00000
Frm 00105
Fmt 4703
Sfmt 4703
30-Day Notice of an Information
Collection Under Review by the Office
of Management and Budget (OMB),
and Request for Comments:
Application To Open an Account for
Billing Purposes
SUMMARY: The Surface Transportation
Board (Board) gives notice that the
Board has submitted to OMB a request
for review and clearance of the Board’s
Application to Open an Account for
Billing Purposes, in accordance with the
Paperwork Reduction Act of 1995, 44
U.S.C. 3501 et seq. (PRA). The Board
E:\FR\FM\29JYN1.SGM
29JYN1
EN29JY05.006
Additional Information
Issued in Washington, DC, on July 25,
2005.
Stacey L. Gerard,
Associate Administrator for Pipeline Safety.
[FR Doc. 05–15022 Filed 7–28–05; 8:45 am]
Surface Transportation Board
Agencies
[Federal Register Volume 70, Number 145 (Friday, July 29, 2005)]
[Notices]
[Pages 43939-43941]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 05-15022]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials Safety Administration
Integrity Management Notifications for Gas Transmission Lines
AGENCY: Office of Pipeline Safety (OPS), Pipeline and Hazardous
Materials Safety Administration (PHMSA), DOT.
ACTION: Notice of advisory bulletin.
-----------------------------------------------------------------------
SUMMARY: Current regulations require operators to notify OPS and state
pipeline safety agencies of certain events related to integrity
management programs for gas transmission lines. This bulletin provides
guidance on notifying OPS and state agencies and describes OPS' review
of notifications. OPS expects this bulletin to improve the efficiency
of the notification and review process.
FOR FURTHER INFORMATION CONTACT: Zach Barrett by phone at (405) 954-
5559 or by e-mail at zbarrett@tsi.jccbi.gov, regarding the subject
matter of this guidance. General information about the PHMSA/OPS
programs may be obtained by accessing OPS's Home page at https://
OPS.dot.gov.
SUPPLEMENTARY INFORMATION: OPS' safety regulations for managing the
integrity of gas transmission lines (49 CFR part 192, subpart O)
require operators to notify OPS and certain state pipeline safety
agencies whenever the operators significantly change their integrity
management programs (49 CFR 192.909(b)). Notifications are also
required before operators can use technology other than in-line
inspection, pressure testing, or direct assessment to assess pipeline
integrity (49 CFR 192.921(a) (4) and 192.937(c) (4)). Notifications are
required when operators cannot meet the schedule required for
remediation of anomalous conditions and safety is not otherwise
provided (49 CFR 192.933(c)).
OPS and state agencies review the notifications to assure
compliance of the underlying actions with applicable integrity
management requirements in Subpart O of Part 192. The following
Advisory Bulletin provides additional details regarding this
notification and review process.
Advisory Bulletin (ADB-05-04)
To: Operators of gas transmission lines.
Subject: Notifications required by the integrity management
regulations in 49 CFR part 192, subpart O.
Purpose: To provide guidance on notifying OPS and state agencies
and information about OPS's review of the notifications.
Advisory
Introduction
The integrity management regulations for gas transmission lines (49
CFR part 192, subpart O) require that operators notify OPS of each of
the following events:
1. When operators make changes to their integrity management
programs that may substantially affect the program's implementation or
may significantly modify the program or schedule for carrying out the
program elements (49 CFR 192.909(b)).
2. When operators plan to use technology other than in-line
inspection, pressure testing, or direct assessment to perform
assessments of pipeline integrity (49 CFR 192.921(a)(4) and
192.937(c)(4)).
3. When operators cannot meet the schedule required by the rule for
remediating any identified condition and cannot provide safety through
a temporary reduction in operating pressure or other action (49 CFR
192.933(c)).
In addition, operators must send notifications of these events to
each state or local pipeline safety agency that either regulates the
safety of the transmission line involved or inspects the line under an
interstate agent agreement with OPS. Operators may notify OPS by mail,
facsimile, or the on-line database (49 CFR 192.949). Notification of
state agencies should be done according to state agency procedures.
The following sections of this advisory bulletin provide guidance
on notifying OPS and state agencies and explain OPS's review of
notifications. The bulletin gives special attention to notifications
concerning ``other technology''--particularly guided wave ultrasound--
and scheduling problems. OPS developed the bulletin based on its
experience with Subpart O notifications.
Notifying OPS
As provided by Sec. 192.949, operators may notify OPS by mail,
facsimile, or via the Web at https://primis.rspa.dot.gov/gasimp/. The
Web option is OPS's preferred method of receiving notifications because
it enables operators to enter information directly into the Integrity
Management Database (IMDB). (Note that as a result of the recent
creation of the Pipeline and Hazardous Materials Safety Administration
within DOT, a new Web address, https://primis.phmsa.dot.gov/gasimp, was
established. The old address will continue to work for some time, and
OPS plans to revise Sec. 192.949 to include the new address.)
OPS uses the IMDB to coordinate its review of notifications among
its regional offices and with state pipeline safety agencies. OPS
transfers notifications submitted via other means to the IMDB, with the
attendant possibility for error.
Operators desiring to notify OPS via the Web should go to the
specified Web address and select ``Notifications'' from the topic links
in the left-hand frame. This will open a page with instructions for
submitting notifications and for downloading a Microsoft Word template
for use in stating each notification. Operators can download the
template from the link within the section of this Web page entitled
``How to: Download and Use the Notification Template.'' (Some users may
have to scroll down the page to see this section). As described further
in the downloading instructions, an operator can use the template on a
local computer system to create a Word document that includes the
notification and a table for entering pipeline data. Although OPS does
not require operators to submit this data with the notification, OPS
believes it would facilitate its review of the
[[Page 43940]]
notification. OPS may request the data if it has additional questions
after its initial review of the notification. The document can be
printed, circulated for review, and used to obtain any approval/
concurrences the operator requires.
Once the Word document is ready for submission, an operator should
return to the Web site and again select ``Notifications.'' On the
notifications page within both the instructions for submitting
notifications and the instructions for downloading the template,
operators will find a link to an ``upload/submission form.'' Operators
should click on that link to open the Notification Submittal Form. This
is a simple form, requiring only a few pieces of identifying
information:
First, the operator must select from one of the three
``types'' of notifications: substantive program change, other
technology, and remediation/repair.
Next, the operator enters identifying information
including the operator name and ID number and the name, job title, e-
mail address, and telephone number of the person making the submission.
The operator must then click ``Browse'' in the ``Upload
File Attachment'' section of the ``File Attachment and Additional
Comments'' portion of the form. This will open a file selection window
like those used by all Microsoft programs to locate and open files. The
operator will navigate to the file in its local computer file system
and click ``Open'' to attach it to the submission form.
Finally, the operator can enter any additional comments in
the field provided, although comments are not required to be included.
When the form is complete, including the file attachment, the
operator clicks ``Save'' to upload the form and its attached file into
the IMDB.
Operators can also e-mail completed Word documents to
Clearinghouse@cycla.com, as described in the instructions. Operator e-
mails should include the name of the operator, its OPID number, and the
name, title, telephone number, and e-mail address of an operator
contact for each notification.
Operators who use the other two methods of submitting
notifications--mail and facsimile--should clearly identify the
notification as ``Subpart O Integrity Management Notification.''
Operators should also include the name of a contact person, including
the contact's e-mail address. (OPS will use this address to communicate
the status of a notification's review).
Notifying State Agencies
State pipeline safety agencies have a significant role in assuring
compliance of gas transmission lines with the Subpart O integrity
management regulations and in reviewing Subpart O notifications.
Agencies that regulate the safety of intrastate lines have primary
responsibility for reviewing notifications concerning transmission
lines they oversee. Agencies that inspect interstate lines under
agreements with OPS send comments on notifications concerning these
lines to OPS, which has primary responsibility for reviewing the
notifications.
Thus, when a state agency is involved in the review, it is
important that operators send notifications directly to that state
agency as Subpart O requires. However, experience to date shows that
operators often overlook the requirement to send notifications to state
agencies. Simply notifying OPS does not satisfy the requirement to
notify appropriate state agencies.
For each notification OPS receives, it is also important for OPS to
know if a state agency has a role in overseeing the line involved in
the notification. If a notification sent to OPS does not indicate the
state in which the line is located and whether the line is interstate
or intrastate, OPS will have to ascertain this information and may
contact the operator for assistance.
Review of Notifications by OPS
OPS does not treat integrity management notifications as petitions
for approval of the underlying actions. Subpart O regulations do not
require such approval. Rather, OPS uses the notifications to determine
if further review is needed to verify that the actions described in the
notifications are consistent with safety and the Subpart O regulations.
The form of review depends on whether the transmission line
involved is under direct state or OPS safety oversight. For intrastate
transmission lines regulated directly by a state pipeline safety
agency, the state agency conducts the review under its own procedures.
OPS enters notifications related to these intrastate lines into the
IMDB database, except notifications entered directly by operators. OPS
enters the results of state reviews in the same manner as described
below for OPS reviews.
OPS reviews notifications related to all other regulated
transmission lines, i.e., interstate lines and those intrastate lines
not regulated directly by a state pipeline safety agency. OPS enters
the notifications into the IMDB database, except those entered by
operators themselves. After OPS begins its review, the status of the
notification in the database changes from ``submitted'' to ``under
review.'' If the e-mail address of an operator's contact is in the
notification entered in the database, the contact will receive an
automatic e-mail message of this change in status.
On the basis of information an operator includes in a notification
and OPS's familiarity with the action described in the notification,
OPS decides whether further inspection of the matter is necessary. If
further review is necessary, OPS enters in the database that it has
``objections'' to the action. Then OPS begins a further review of the
matter by sending a letter to the operator that states the objections
and allows the operator an opportunity to respond to the objections.
OPS then changes the status of the notification in the IMDB database to
``objections noted.'' If, based on the operator's response, OPS decides
that further review of the matter is not necessary, OPS enters in the
database that it has ``no objections'' to the action, but does not send
a letter to the operator. If the e-mail address of an operator contact
is in the database, the contact will receive an automatic e-mail
message of each change in status.
The gas integrity management Web page, https://primis.phmsa.dot.gov/
gasimp/, describes this review process in more detail. A process
description, including a flow chart, can be found in the ``Key
Documents'' section of that page. There is also a link to the Key
Documents page in the ``Notifications'' section.
Notifications Concerning Use of ``Other Technology'': In order to
expedite any potential review, notifications concerning use of ``other
technology'' should include the following information:
1. The operator's demonstration that the ``other technology'' can
provide an equivalent understanding of the condition of the line pipe,
as required by 49 CFR 192.921(a)(4) and 192.937(c)(4). The
demonstration should explain the following:
Where and how the technology will be used
What procedures will be followed
What criteria will apply to data analysis and evaluation,
including verification excavations and acceptance and rejection of
anomalies
2. Procedures for ensuring that qualified personnel will implement
the technology, as required by 49 CFR 192.915 and subpart N of part
192.
Various operators have submitted notifications of their plans to
use guided wave ultrasound as ``other technology''
[[Page 43941]]
for assessing the integrity of transmission line segments in casings.
Guided wave ultrasound can be used to assess pipe for some distance on
either side of a bell hole in which inspection equipment is located,
making the technology suitable for assessing pipe within a casing. The
technology is capable of detecting metal loss and of providing
indications of dents, although sizing of dents is very difficult. OPS
has experience in reviewing notifications on the use of this technology
on hazardous liquid pipelines and, when satisfied with the information
presented, has closed these notifications under the classification ``no
objections'' noted. OPS understands that the technology's performance
in specific applications is critically dependent on the inspection
equipment and procedures used and the training and qualification of
those involved in its use.
If further review is necessary for notifications concerning use of
guided wave ultrasound technology, as part of the equivalency
demonstration under 49 CFR 192.921(a)(4) or 192.937(c)(4), OPS may ask
operators to show use of the technology with inspection equipment set
up in a typical condition of intended use. This information is
especially important for applications that do not involve using the
technology on both sides of a casing.
Guided wave ultrasound is capable of taking readings in both
directions from its placement on a section of line pipe, as shown by
the illustration below. To validate the technology's application,
operators should investigate all indications of potential threats to
pipeline integrity in the opposite direction of the casing
(supplemental region) and should excavate at least once in each
supplemental region if no indications of concern are identified.
Indications of welds are one of many potential readings operators
should use to verify the accuracy of the device. Operators must
demonstrate that all applications are effective for the type
conditions, equipment, procedures, and performance measures for
detecting the severity of the anomaly.
[GRAPHIC] [TIFF OMITTED] TN29JY05.006
Scheduling Problems. If further review of a notification concerning
failure to meet a remediation schedule and otherwise provide for public
safety is needed, OPS may ask the operator to explain why remediation
by means other than pipe replacement or lowering the pressure is not
feasible.
Additional Information
Additional questions concerning notifications or any aspect of
compliance with Subpart O requirements can be sent via the ``Question
or Comment'' link on the public Web site (https://primis.phmsa.dot.gov/
gasimp/). OPS staff involved in integrity management oversight will
respond. OPS also encourages operators to review the Frequently Asked
Questions (FAQ) on the Web site, which provide the answers to many
common questions.
Issued in Washington, DC, on July 25, 2005.
Stacey L. Gerard,
Associate Administrator for Pipeline Safety.
[FR Doc. 05-15022 Filed 7-28-05; 8:45 am]
BILLING CODE 4910-60-P