July 21, 2005 – Federal Register Recent Federal Regulation Documents

Review Under Section 610 of the Regulatory Flexibility Act: Economic Impact of the Chemical Weapons Convention Regulations (CWCR) on Small Business Entities
Document Number: 05-14441
Type: Proposed Rule
Date: 2005-07-21
Agency: Department of Commerce, Bureau of Industry and Security, Industry and Security Bureau
This document requests comments on the economic impact of the Chemical Weapons Convention Regulations (CWCR) on small business entities, pursuant to the requirements of Section 610 of the Regulatory Flexibility Act (RFA). The comments sought in this document should be directed to the impact of the CWCR on small business entities, only. The public does not need to re-submit previous comments made during the comment period that closed on February 7, 2005, for the proposed CWCR published on December 7, 2004.
Deposit of Proceeds From Lands Withdrawn for Native Selection; Correction
Document Number: 05-14437
Type: Rule
Date: 2005-07-21
Agency: Department of the Interior, Bureau of Indian Affairs, Indian Affairs Bureau
This document contains a correction to a final rule that was published Thursday, July 14, 2005 (70 FR 40660). The regulation relates to Deposit of Proceeds from Lands Withdrawn for Native Selection.
Exports of Nuclear Grade Graphite: Change in Licensing Jurisdiction.
Document Number: 05-14412
Type: Rule
Date: 2005-07-21
Agency: Department of Commerce, Bureau of Industry and Security, Industry and Security Bureau
The Bureau of Industry and Security is publishing this final rule to make nuclear grade graphite intended for non-nuclear end uses subject to the Export Administration Regulations' licensing jurisdiction, and imposes a license requirement for exports and reexports to destinations of concern for nuclear proliferation reasons. The Nuclear Regulatory Commission (NRC) is discontinuing such jurisdiction in a corresponding final rule published in this same issue of the Federal Register. This transfer of jurisdiction and the imposition of license requirements only to destinations of concern for nuclear proliferation reasons are intended to remove the licensing burden on exporters of nuclear grade graphite intended for non-nuclear end uses to most destinations.
Approval and Promulgation of Implementation Plans; New York State Implementation Plan Revision
Document Number: 05-14407
Type: Proposed Rule
Date: 2005-07-21
Agency: Environmental Protection Agency
The Environmental Protection Agency is proposing to approve a revision to the New York State Implementation Plan (SIP) concerning New York's permitting program. The SIP revision consists of amendments to Title 6 of the New York Codes, Rules and Regulations, Part 201, ``Permits and Certificates.'' The intended effect of this proposal is to incorporate administrative changes to New York's permitting program into the SIP.
Approval and Promulgation of Implementation Plans; New Jersey Architectural Coatings Rule
Document Number: 05-14406
Type: Proposed Rule
Date: 2005-07-21
Agency: Environmental Protection Agency
The Environmental Protection Agency (EPA) is proposing to approve a revision to the New Jersey State Implementation Plan (SIP) for ozone concerning the control of volatile organic compounds. The SIP revision consists of amendments to Subchapter 23 ``Prevention of Air Pollution From Architectural Coatings'' of 7:27 of the New Jersey Administrative Codes, which are needed to meet the shortfall in emissions reduction identified by EPA in New Jersey's 1-hour ozone attainment demonstration SIP. The intended effect of this action is to approve a control strategy required by the Clean Air Act, which will result in emission reductions that will help achieve attainment of the national ambient air quality standard for ozone.
Approval and Promulgation of Air Quality Implementation Plan; Idaho; Correction
Document Number: 05-14399
Type: Rule
Date: 2005-07-21
Agency: Environmental Protection Agency
This document corrects the preamble to a final rule published in the Federal Register of July 11, 2005 (70 FR 39658) regarding revisions to the open burning regulations in Idaho's State Implementation Plan. This notice clarifies that, under section 307(b)(1) of the Clean Air Act, any petition for judicial review of this action must be filed in the United States Court of Appeals for the appropriate circuit within 60 days from the date notice of approval appeared in the Federal Register, and not 30 days, as erroneously stated in July 11, 2005 action.
Airworthiness Directives; Boeing Model 767-300 and -300F Series Airplanes
Document Number: 05-14395
Type: Proposed Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 767-300 and -300F series airplanes. This proposed AD would require a one-time operational test of the pilots' seat locks and the seat tracks to ensure that the seats lock in position and the seat tracks are aligned correctly; and re-alignment of the seat tracks, if necessary. This proposed AD is prompted by reports indicating that a pilot's seat slid from the forward to the aft-most position during acceleration and take-off. We are proposing this AD to prevent uncommanded movement of the pilots' seats during acceleration and take-off of the airplane, and consequent reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A319-100, A320-200, and A321-100 and -200 Series Airplanes
Document Number: 05-14394
Type: Proposed Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain Airbus Model A319-100, A320-200, and A321-100 and -200 series airplanes. The original NPRM would have superseded an existing AD that currently requires modification of the telescopic girt bar of the escape slide/raft assembly, and follow-on actions. The original NPRM proposed to mandate a new modification of the telescopic girt bar, which would terminate the repetitive functional tests required by the existing AD. The original NPRM also proposed to expand the applicability of the existing AD. The original NPRM was prompted by development of a new, improved modification. This new action would revise the original NPRM by proposing to mandate the installation of placards on the modified girt bars, and reduce the compliance time. We are proposing this supplemental NPRM to prevent failure of the escape slide/raft to deploy correctly, which could result in the slide being unusable during an emergency evacuation and consequent injury to passengers or airplane crewmembers.
Airworthiness Directives; Aerospatiale Model ATR72 Airplanes
Document Number: 05-14393
Type: Proposed Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Aerospatiale Model ATR72 airplanes. This proposed AD would require a one-time general visual inspection for contamination of the surface of the upper arms of the main landing gear (MLG) secondary side brace assemblies; and repetitive eddy current inspections for cracking of the upper arms, and related specified and corrective actions if necessary. This proposed AD also would mandate eventual replacement of aluminum upper arms with steel upper arms, which would end the repetitive inspections. This proposed AD is prompted by two reports of rupture of the upper arm of the MLG secondary side brace due to fatigue cracking. We are proposing this AD to prevent cracking of the upper arms of the secondary side brace assemblies of the MLG, which could result in collapse of the MLG during takeoff or landing, damage to the airplane, and possible injury to the flightcrew and passengers.
Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Albuquerque/Bernalillo County
Document Number: 05-14388
Type: Rule
Date: 2005-07-21
Agency: Environmental Protection Agency
This action finalizes our approval of the State Implementation Plan (SIP) revisions submitted by the Governor of New Mexico on September 7, 2004. The submittal revises the second ten-year carbon monoxide (CO) maintenance plan for the Albuquerque/Bernalillo County, New Mexico area. The submittal also revises the relevant parts of the New Mexico Administrative Code (NMAC) including revisions to the General Provisions, Inspection and Maintenance (I&M) Program, and the contingency measures. We are finalizing approval of these revisions in accordance with the requirements of the Federal Clean Air Act (the Act).
Update to Divided State Retirement Systems Coverage Group List and Technical Coverage Corrections Required by the Social Security Protection Act of 2004
Document Number: 05-14385
Type: Rule
Date: 2005-07-21
Agency: Social Security Administration, Agencies and Commissions
We are issuing these final rules to reflect in our regulations four self-implementing provisions in the Social Security Protection Act of 2004 (SSPA). One provision adds two States (Kentucky and Louisiana) to a list of States that are permitted to divide public employee retirement systems based on whether the State and/or local employees in positions under the systems want Social Security and/or Medicare coverage or not. The other three provisions make technical corrections to the Social Security Act (the Act) and the Internal Revenue Code (IRC) regarding various Social Security coverage issues.
Proposed Changes to Arbitration Policies, Functions, and Procedures
Document Number: 05-14347
Type: Proposed Rule
Date: 2005-07-21
Agency: Federal Mediation and Conciliation Service, Agencies and Commissions
This document corrects Sec. 1404.5(b) and to add revisions to Sec. 1404.5(d)(7) in a proposed rule published in the Federal Register of July 7, 2005 (70 FR 39209), regarding Arbitration Policies, Functions and Procedures. The corrections clarify the Proof of Qualification needed to be on the Roster in Sec. 1404.5(b) and adds the non-payment of the annual listing fee in Sec. 1404.5(d)(7).
Modification of Legal Description of the Class E Airspace; Columbia Regional Airport, MO
Document Number: 05-14338
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
An examination of controlled airspace for Columbia Regional Airport, MO, has revealed a discrepancy in the legal description of the Class E airspace area beginning at 700 feet above the surface. This action corrects that discrepancy by incorporating the coordinates of the Columbia Regional Airport ILS Localizer. Extensions to this Class E airspace area are described in relation to the Columbia Regional Airport ILS Localizer, therefore the coordinates for this facility must be included in the legal description to bring the airspace area into compliance with FAA directives.
Modification of Class E Airspace; Newton City-County Airport, KS
Document Number: 05-14337
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
This action amends Title 14 Code of Federal Regulations, part 71 (14 CFR 71) by revising Class E airspace areas at Newton City-County Airport, KS. A modification of the Airport Reference Point (AFP) necessitates the revision of the Class E airspace area extending upward from 700 feet above ground level (AGL) at Newton, KS to conform to the criteria in FAA Orders.
Amendment of Class E Airspace; Blairstown, NJ
Document Number: 05-14335
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E airspace at Blairstown, NJ. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft operating into Blairstown Airport, Blairstown, NJ, under Instrument Flight Rules (IFR).
Inspection and Maintenance Standards for Steam Locomotives
Document Number: 05-14334
Type: Rule
Date: 2005-07-21
Agency: Federal Railroad Administration, Department of Transportation
On April 19, 2005, FRA published a notice of proposed rulemaking (NPRM) proposing to correct an inadvertent, small omission from FRA Form 4 (Boiler Specification Card) in the Steam Locomotive Inspection and Maintenance Standards. The form is used to record information about inspections of steam locomotive boilers. FRA received two comments supporting the adoption of the proposed rule. Therefore, FRA adopts the proposed rule as a final rule.
New Animal Drugs for Use in Animal Feeds; Roxarsone; Semduramycin
Document Number: 05-14329
Type: Rule
Date: 2005-07-21
Agency: Food and Drug Administration, Department of Health and Human Services
The Food and Drug Administration (FDA) is correcting the single-ingredient roxarsone Type A medicated article that may be used to formulate three-way, combination drug Type C medicated broiler chicken feeds containing semduramicin, virginiamycin, and roxarsone under a new animal drug application (NADA) recently approved for Phibro Animal Health. FDA is also amending the animal drug regulations to reflect two roxarsone Type A medicated articles approved under separate new animal drug applications (NADAs) for different conditions of use. This action is being taken to improve the accuracy of the agency's regulations.
Change of Address; Technical Amendment
Document Number: 05-14328
Type: Rule
Date: 2005-07-21
Agency: Food and Drug Administration, Department of Health and Human Services
The Food and Drug Administration (FDA) is amending its regulations to correct an incorrect address for the Center for Food Safety and Applied Nutrition (CFSAN). This action is editorial in nature and is intended to improve the accuracy of the agency's regulations.
Drawbridge Operation Regulations; New Jersey Intracoastal Waterway, Manasquan River
Document Number: 05-14322
Type: Proposed Rule
Date: 2005-07-21
Agency: Coast Guard, Department of Homeland Security
The Coast Guard proposes to temporarily change the regulations that govern the operation of the Route 35 Bridge, at New Jersey Intracoastal Waterway (NJICW) mile 1.1, across Manasquan River, at Brielle, New Jersey. The bridge will be closed to navigation on three four-month closure periods beginning from 8 a.m. November 1, 2006 until 5 p.m. March 1, 2007; from 8 a.m. on November 1, 2007 until 5 p.m. March 1, 2008; and from 8 a.m. on November 1, 2008 until 5 p.m. March 1, 2009. The extensive structural, mechanical, and electrical repairs and improvements necessitate these closures.
Public Information Regulations
Document Number: 05-14320
Type: Rule
Date: 2005-07-21
Agency: Food and Drug Administration, Department of Health and Human Services
The Food and Drug Administration (FDA) is amending its public information regulations to implement more comprehensively the exemptions contained in the Freedom of Information Act (FOIA). This action incorporates exemptions one, two, and three of the FOIA into FDA's public information regulations. Exemption one applies to information that is classified in the interest of national defense or foreign policy. Exemption two applies to records that are related solely to an agency's internal personnel rules and practices. Exemption three incorporates the various nondisclosure provisions that are contained in other Federal statutes.
Payroll Deductions by Member Corporations for Contributions to a Trade Association's Separate Segregated Fund
Document Number: 05-14318
Type: Rule
Date: 2005-07-21
Agency: Federal Election Commission, Agencies and Commissions
The Federal Election Commission is amending its rules regarding contributions to the separate segregated fund (``SSF'') of a trade association by employee-stockholders and executive and administrative personnel of corporations that are members of the trade association (collectively, ``solicitable class employees''). The revised rules will no longer prohibit corporate members of a trade association from using a payroll deduction or check-off system for employee contributions to the trade association's SSF. Instead, these final rules will allow a corporate member of a trade association to provide incidental services to collect and forward contributions from its solicitable class employees to the SSF of the trade association, including use of a payroll deduction or check-off system, upon written request of the trade association. These final rules will also require any member corporation that provides incidental services for contributions to a trade association's SSF, as well as the corporation's subsidiaries, divisions, branches and affiliates, to provide the same services for contributions to the SSF of any labor organization that represents members working for the corporation, or the corporation's subsidiaries, divisions, branches or affiliates, upon written request of the labor organization and at a cost not to exceed actual expenses incurred. Additional information appears in the Supplementary Information that follows.
Use of Form S-8, Form 8-K, and Form 20-F by Shell Companies
Document Number: 05-14311
Type: Rule
Date: 2005-07-21
Agency: Securities and Exchange Commission, Agencies and Commissions
The Securities and Exchange Commission is adopting rules and rule amendments relating to filings by reporting shell companies. We are defining a ``shell company'' as a registrant with no or nominal operations and either no or nominal assets, assets consisting solely of cash and cash equivalents, or assets consisting of any amount of cash and cash equivalents and nominal other assets. The rules and rule amendments prohibit the use of Form S-8 under the Securities Act of 1933 by shell companies. In addition, they require a shell company that is reporting an event that causes it to cease being a shell company to disclose the same type of information that it would be required to provide in registering a class of securities under the Securities Exchange Act of 1934. These provisions are intended to protect investors by deterring fraud and abuse in our securities markets through the use of reporting shell companies.
Assessment and Collection of Regulatory Fees for Fiscal Year 2005; Assessment and Collection of Regulatory Fees for Fiscal Year 2004
Document Number: 05-14267
Type: Rule
Date: 2005-07-21
Agency: Federal Communications Commission, Agencies and Commissions
In this document, we conclude a proceeding to collect $280,098,000 in regulatory fees for Fiscal Year (FY) 2005. These fees are mandated by Congress and are collected to recover the regulatory costs associated with the Commission's enforcement, policy and rulemaking, user information, and international activities. We also deny the petition for reconsideration filed by Cingular Wireless LLC of the Commission's FY 2004 Report and Order.
Obtaining Information From Financial Institutions
Document Number: 05-14212
Type: Proposed Rule
Date: 2005-07-21
Agency: Department of Defense, Department of the Army, Army Department
The Department of the Army proposes to revise its regulation concerning obtaining information from financial institutions. The regulation prescribes policies for the Department of the Army to obtain information on a customer's financial records from financial institutions.
Export and Import of Nuclear Equipment and Material: Nuclear Grade Graphite
Document Number: 05-14208
Type: Rule
Date: 2005-07-21
Agency: Nuclear Regulatory Commission, Agencies and Commissions
The Nuclear Regulatory Commission (NRC) export/import regulations in 10 CFR part 110 are being revised to remove the NRC's export licensing requirements for nuclear grade graphite for non- nuclear end use. The purpose of this change is to remove from NRC export licensing jurisdiction nuclear materials which are not of significance from a nuclear proliferation perspective. The responsibility for the licensing of exports of nuclear grade graphite for non-nuclear end use will be transferred to the Department of Commerce (DOC). The DOC is publishing elsewhere in this Federal Register a final rule that places such exports under its jurisdiction.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes, and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
Document Number: 05-14169
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting a typographical error in an existing airworthiness directive (AD) that was published in the Federal Register on June 22, 2005 (70 FR 36011). The error resulted in an incomplete listing of the affected airplanes. This AD applies to all EMBRAER Model EMB-135 airplanes, and all Model EMB-145, -145ER, -145MR, -145LR, - 145XR, -145MP, and -145EP airplanes. This AD requires repetitive inspections of the electrical connectors of the electric fuel pumps to detect discrepancies, application of anti-corrosion spray, replacement of all fuel pumps with improved fuel pumps, repetitive inspections after all six fuel pumps are replaced, and applicable corrective actions.
Airworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes
Document Number: 05-14088
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas airplanes identified above. This AD requires repetitive functional tests for noisy or improper operation of the exterior emergency control handle assemblies of the mid, overwing, and aft passenger doors, and corrective actions if necessary. This AD also provides for optional terminating action for the repetitive tests. This AD is prompted by a report that the exterior emergency control mechanism handles were inoperative on a McDonnell Douglas Model MD-11 airplane. We are issuing this AD to prevent failure of the passenger doors to operate properly in an emergency condition, which could delay an emergency evacuation and possibly result in injury to passengers and flightcrew.
Airworthiness Directives; Airbus Model A320-111 Airplanes and Model A320-200 Series Airplanes
Document Number: 05-14087
Type: Rule
Date: 2005-07-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) that applies to certain Airbus Model A320-111 airplanes and Model A320-200 series airplanes. This AD requires post-maintenance bleeding of accumulated air from, or ground functional testing of, the ram air turbine (RAT) system; modifying and reidentifying the airborne ground check module of the RAT system; and replacing the RAT reducer assembly if applicable. This AD is prompted by reports of unsuccessful in-flight RAT tests during which a deployed RAT failed to pressurize the blue hydraulic circuit of the RAT system. We are issuing this AD to prevent failure of the RAT during an in-flight emergency, which could lead to loss of hydraulic and electrical power and reduced controllability of the airplane.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.