Federal Aviation Administration March 5, 2024 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2024-04556
Type: Rule
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that a certain nondestructive test (NDT) procedure associated with a certain airworthiness limitation for inspecting the inboard, mid, and outboard flap metallic end ribs does not contain all of the necessary instructions. This AD requires a revision to the existing maintenance or inspection program to require using a revised NDT procedure when performing an airworthiness limitation task. This AD also prohibits the use of earlier revisions of that NDT procedure. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of VOR Federal Airways V-78 and V-171; Darwin, MN
Document Number: 2024-04611
Type: Rule
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action amends Very High Frequency Omnidirectional Range (VOR) Federal Airways V-78 and V-171 in the vicinity of Darwin, MN. The amendments are due to the planned decommissioning of the VOR portion of the Darwin, MN (DWN), VOR/Tactical Air Navigation (VORTAC) navigational aid (NAVAID). The Darwin VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Amendment of Class B Airspace Description; Cincinnati/Northern Kentucky International Airport, KY
Document Number: 2024-04610
Type: Rule
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Cincinnati/Northern Kentucky International Airport, KY, Class B airspace area description by making editorial changes to three sub-area shelf boundaries of the Class B airspace from using the Cincinnati, KY, Very High Frequency Omnidirectional Range/Tactical Air Navigation (VORTAC) to a reference point. The reference point uses the same geographic coordinates as the Cincinnati VORTAC location listed in the existing description. Additionally, this action also removes the airport name from the airspace designation to comply with FAA regulatory guidance, updates the Airport Reference Point (ARP) geographic coordinates for the Cincinnati/Northern Kentucky International Airport to match the FAA National Airspace System Resource (NASR) database, and changes the Class B airspace center point from the Cincinnati/Northern Kentucky International Airport to ``Point of Origin''. The point of origin uses the same geographic coordinates as the Cincinnati/Northern Kentucky International Airport listed in the existing description. Finally, this action makes minor edits to the sub-area descriptions for clarity and readability. These changes are editorial only and do not alter the current boundaries, altitudes, ATC procedures, or operating requirements for the Cincinnati/Northern Kentucky International Airport Class B airspace.
Airworthiness Directives; Austro Engine GmbH Engines
Document Number: 2024-04579
Type: Rule
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Austro Engine GmbH Model E4 and E4P engines. This AD was prompted by reports of engine failures and the determination that certain batches of cap screws, installed on the inner main bearing positions of the engine, were manufactured at the lower end of the material strength tolerance. This AD requires replacing certain cap screws with a part eligible for installation and prohibits installing certain cap screws on any inner main bearing position of any engine. This AD also prohibits installing certain engine cores on any engine unless certain requirements are met. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Protection of Voluntarily Submitted Information
Document Number: 2024-04576
Type: Notice
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 23, 2023. The collection involves protection of voluntarily submitted information. Part 193 of the Federal Aviation Administration (FAA) regulations provides that certain information submitted to the FAA on a voluntary basis is not to be disclosed. This part implements a statutory provision. The purpose of part 193 is to encourage the aviation community to voluntarily share information with the FAA so that the agency may work cooperatively with industry to identify modifications to rules, policies, and procedures needed to improve safety, security, and efficiency of the National Airspace System (NAS). The information collection associated with part 193 also supports the Department of Transportation's Strategic Goal of Safety and Security.
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
Document Number: 2024-04557
Type: Rule
Date: 2024-03-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600- 2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.