Federal Aviation Administration August 15, 2023 – Federal Register Recent Federal Regulation Documents

Special Conditions: The Boeing Company Model 737-10 Airplane; Dynamic Test Requirements for Single Occupant Oblique Seats With or Without Airbags and/or 3-Point Restraints
Document Number: 2023-17403
Type: Rule
Date: 2023-08-15
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for The Boeing Company (Boeing) Model 737-10 series airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is oblique (side-facing) single-occupant seats equipped with airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Piaggio Aviation S.p.A. Airplanes
Document Number: 2023-17575
Type: Rule
Date: 2023-08-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Piaggio Aviation S.p.A. (Piaggio) Model P-180 airplanes. This AD was prompted by a report of corrosion-induced cracking on the horizontal tail trim actuator (HTTA) fitting assembly. This AD requires repetitively inspecting the HTTA fitting assembly for corrosion and cracking until the HTTA fitting assembly is replaced with a new part. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.