Federal Aviation Administration March 16, 2020 – Federal Register Recent Federal Regulation Documents

Orders Limiting Operations at John F. Kennedy International Airport and New York LaGuardia Airport; High Density Traffic Airports Rule at Ronald Reagan Washington National Airport
Document Number: 2020-05278
Type: Notice
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
This notice announces a limited waiver of the minimum usage requirement that applies to Operating Authorizations or ``slots'' at John F. Kennedy International Airport (JFK), New York LaGuardia Airport (LGA) and Ronald Reagan Washington National Airport (DCA), in light of the current impacts on air travel demand related to the outbreak of novel 2019 coronavirus (also known as ``SARS-CoV-2,'' causing the disease COVID-19) (``Coronavirus''). Through May 31, 2020, the FAA will waive the minimum usage requirement as to any slot associated with a scheduled nonstop flight between JFK, LGA, or DCA, respectively, and other points that is canceled as a direct result of Coronavirus-related impacts. This action is effective for Coronavirus-related flight cancelations through May 31, 2020. The duration of the Coronavirus outbreak and its effect on demand for commercial air travel remains to be seen. The FAA will continue to monitor the situation and may augment this waiver as circumstances warrant. The FAA will inform carriers of any decision to extend the waiver period as soon as possible. In addition, this notice announces the policy that the FAA will prioritize flights canceled at designated International Air Transport Association (IATA) Level 2 airports in the U.S. due to Coronavirus through May 31, 2020, including at Chicago O'Hare International Airport (ORD), Newark Liberty International Airport (EWR), Los Angeles International Airport (LAX), and San Francisco International Airport (SFO), for purposes of establishing a carrier's operational baseline in the next corresponding season. The FAA is acting in good faith in granting relief to carriers worldwide impacted by the Coronavirus. In doing so, the FAA expects that U.S. carriers will be accommodated with reciprocal relief by foreign slot coordinators.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-05264
Type: Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report of incorrectly engaged lock washer tabs of the main landing gear (MLG) forward pintle bearing (FPB) at the forward face of the trunnion block. This AD requires detailed inspections of the left-hand (LH) and right-hand (RH) side MLG FPB nuts and lock washer tabs, and depending on findings, accomplishment of repetitive detailed inspections or corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-05255
Type: Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-214, -232, and -271N airplanes, and Model A321-231 airplanes. This AD was prompted by a report of a production line inspection finding of damage on a main landing gear (MLG) side stay attachment outboard lug. This AD requires an inspection for discrepancies of the MLG side stay attachment outboard lugs, left-hand and right-hand sides, and applicable corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
Document Number: 2020-05254
Type: Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A11 airplanes. This AD was prompted by reports that, under certain combinations of airplane configuration and flight conditions, higher than anticipated temperatures could lead to an engine fire warning nuisance message. This AD requires installation of Integrated Air Systems Controller (IASC) software version 5.0. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.A. Helicopters
Document Number: 2020-05246
Type: Proposed Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for Leonardo S.p.A. Model AW169 helicopters. This proposed AD would require modifying the weight on wheels (WoW) support installation on the main landing gear (MLG). This proposed AD is prompted by a report that an inappropriately tightened WoW support could result in a rotation of the support and improper WoW switch performance. The actions of this proposed AD are intended to correct an unsafe condition on these products.
Airworthiness Directives; Bell Helicopter Textron Canada Limited Helicopters
Document Number: 2020-05244
Type: Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Bell Helicopter Textron Canada Limited (Bell Canada) Model 429 helicopters. This AD requires inspecting a certain part-numbered curvic coupling for proper engagement and depending on the inspection results, inspecting for play, inspecting the curvic coupling teeth, inspecting the flapping bearing teeth, replacing parts, performing a rigging check, and reporting information. This AD was prompted by a report of disengaged teeth of a curvic coupling due to improper installation. The actions of this AD are intended to address an unsafe condition on these products.
Proposed Amendment of Class D Airspace and Revocation of Class E Airspace; Bogue, NC
Document Number: 2020-05214
Type: Proposed Rule
Date: 2020-03-16
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class D airspace by updating the geographic coordinates, and remove Class E airspace extending upward from 700 feet above the surface at Bogue Field Marine Corps Auxiliary Landing Field, (MCALF), Bogue, NC, at the request of the US Marine Corps. Class E airspace is no longer required, as there are no instrument approaches into Bogue Field MCALF. This action would also replace the outdated term Airport/Facility Directory with term Chart Supplement in the legal description of associated Class D airspace. This action would enhance the safety and management of controlled airspace within the National Airspace System.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.