Wyoming Administrative Code
Agency 020 - Environmental Quality, Dept. of
Sub-Agency 0011 - Water Quality
Chapter 12 - DESIGN AND CONSTRUCTION STANDARDS FOR PUBLIC WATER SUPPLIES
Section 12-19 - Incorporation by Reference

Universal Citation: WY Code of Rules 12-19

Current through September 21, 2024

(a) The following codes, standards, rules, and regulations referenced in this Chapter are incorporated by reference:

(i) American National Standards Institute/National Sanitation Foundation Standard 53, Drinking Water Treatment Units - Health Effects (2019), referred to as "NSF/ANSI 53," available at https://webstore.ansi.org/Standards/NSF/NSFANSI532020;

(ii) American National Standards Institute/National Sanitation Foundation Standard 55, Ultraviolet Microbiological Water Treatment Systems (2020), referred to as "NSF/ANSI 55," available at https://webstore.ansi.org/Standards/NSF/NSFANSI552021;

(iii) American National Standards Institute/National Sanitation Foundation Standard 61, Drinking Water System Components - Health Effects NSF/ANSI/CAN 61-2020/NSF/ANSI/CAN 600-2021, referred to as "NSF/ANSI/CAN 61-2020/NSF/ANSI/CAN 600-2021," available at https://webstore.ansi.org/Standards/NSF/NSFANSI612021600;

(iv) American National Standards Institute/National Sanitation Foundation Standard 372, Drinking Water System Components-Lead Content 372-20, referred to as "NSF/ANSI/CAN 372-20," available at https://webstore.ansi.org/Standards/NSF/NSFANSI3722020;

(v) American National Standards Institute/National Sanitation Foundation Standard 419, Public Drinking Water Equipment Performance - Filtration, referred to as "NSF/ANSI 419-2018," available at https://webstore.ansi.org/Standards/NSF/NSFANSI4192018;

(vi) American Petroleum Institute Specification 5L, Line Pipe, Forty-Sixth Edition (2019), referred to as "API 5L," available at https://www.techstreet.com/api/standards/api-spec-5l?gateway_code=api&product_id=2010552;

(vii) American Water Works Association Standard A100, Water Wells, A100-20, referred to as "AWWA A100-20," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/83080725;

(viii) American Water Works Association Standard C200, Steel Water Pipe, 6 In. (150 mm) and Larger, C200-17 (2017), referred to as "AWWA C200," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/63106282;

(ix) American Water Works Association Standard C300, Reinforced Concrete Pressure Pipe, Steel-Cylinder Type, C300-11 (2011), referred to as "AWWA C300," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/59483818;

(x) American Water Works Association Standard C301, Prestressed Concrete Pressure Pipe, Steel-Cylinder Type, C301-14 (2014), referred to as "AWWA C301," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/81647229;

(xi) American Water Works Association Standard C600, Installation of Ductile-Iron Mains and Their Appurtenances, C600-10 (2010), referred to as "AWWA C600," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/25724;

(xii) American Water Works Association Standard C601, AWWA Standard for Disinfecting Water Mains, C601-81 (1981), referred to as "AWWA C601," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/18646;

(xiii) American Water Works Association Standard C652, Disinfection of Water Storage Facilities, C652 (2011), referred to as "AWWA C652," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/81912774;

(xiv) American Water Works Association Standard C900, Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100 mm through 300 mm), for Water Transmission and Distribution, C900-07 (2007), referred to as "AWWA C900," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/18943;

(xv) American Water Works Association Standard C901, Polyethylene (PE) Pressure Pipe and Tubing, 3/4 in. (19 mm) through 3 in. (76 mm), for Water Service, C901- 20 (2020), referred to as "AWWA C901," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/86488411;

(xvi) American Water Works Association Standard C906, Polyethylene (PE) Pressure Pipe and Fittings, 4 in. through 65 In. (100 mm Through 1,650 mm), for Waterworks, C906-21 (2021), referred to as "AWWA C906," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/105341623;

(xvii) American Water Works Association Standard C950, Fiberglass Pressure Pipe, C950-13 (2013), referred to as "AWWA C950," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/34040472;

(xviii) American Water Works Association Standard D100, Welded Carbon Steel Tanks for Water Storage, D100-11 (2011), referred to as "AWWA D100-11," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/28162;

(xvix) American Water Works Association Standard D102, Coating Steel Water-Storage Tanks, D102-17 (2017), referred to as "AWWA D102-21," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/92298590;

(xx) American Water Works Association Standard D103, Factory-Coated Bolted Carbon Steel Tanks for Water Storage, D103-19, referred to as "AWWA D103-19," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/80453600;

(xxi) American Water Works Association Standard D104-17, Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Storage, referred to as "AWWA D104-17," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/65522513;

(xxii) American Water Works Association Standard D106-20, Sacrificial anode Cathodic Protection Systems for the Interior Submerged Surfaces of Steel Water Storage Tanks, referred to as "AWWA D106-20," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/84700967;

(xxiii) American Water Works Association Standard D107-16, Composite Elevated Tanks for Water Storage, referred to as "AWWA D107-16," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/54635993;

(xxiv) American Water Works Association Standard D108-19, Aluminum Dome Roofs for Water Storage Facilities, referred to as "AWWA D108-19," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/80933896;

(xxv) American Water Works Association Standard D110-13 (R18), Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks, referred to as "AWWA D110-13 (R18)," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/72304450;

(xxvi) American Water Works Association Standard D115-20, Tendon-Prestressed Concrete Water Tanks, referred to as "AWWA D115-20," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/83072907;

(xxvii) American Water Works Association Standard D120-19, Thermosetting Fiberglass-Reinforced Plastic Tanks, referred to as "AWWA D120-19," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/79004100;

(xxviii) American Water Works Association Standard D121-12, Bolted Aboveground Thermosetting Fiberglass Reinforced Plastic Panel-Type Tanks for Water Storage, referred to as "AWWA D121-12," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/29429;

(xxix) American Water Works Association Standard M23-20, PVC Pipe - Design and Installation, Third Edition, M23, referred to as "AWWA M23-20," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/81145714;

(xxx) American Water Works Association Standard M55-20, PE Pipe-Design and Installation, Second Edition, M55, referred to as "M55-20," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/84701177;

(xxxi) American Water Works Association Manual M42, Steel Water Storage Tanks, 2013, referred to as "AWWA M42," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/36253113;

(xxxii) American National Standards Institute ASSE Standard 1024, Dual Check Backflow Preventers, ASSE 1024-17 (2017), referred to as "ASSE 1024," available at https://webstore.ansi.org/Standards/ASSE-Sanitary/ASSEStandard10242017;

(xxxiii) ASTM International Standard A53, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, A53M-18 (2018), referred to as "ASTM A53, available at https://www.astm.org/a0053_a0053m-18.html;

(xxxiv) ASTM International Standard A134, Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over), A134M-18 (2018), referred to as "ASTM A134," available at https://webstore.ansi.org/standards/astm/astma134a134m18;

(xxxv) ASTM International Standard A135, Standard Specification for Electric-Resistance-Welded Steel Pipe, A135M-19 (2019), referred to as "ASTM A135," available at https://webstore.ansi.org/standards/astm/astma135a135m19;

(xxxvi) ASTM International Standard ASTM A139 / A139M - 16, Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over), (2016), referred to as "ASTM A139," available at https://www.astm.org/a0139_a0139m-16.html;

(xxxvii) ASTM International Standard A409, Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service, A409M-15 (2015), referred to as "ASTM A409," available at https://webstore.ansi.org/Standards/ASTM/ASTMA409A409M15;

(xxxviii) ASTM International Standard C12, Standard Practice for Installing Vitrified Clay Pipe Lines, C12-17 (2017), referred to as "ASTM C12," available at https://webstore.ansi.org/standards/astm/astmc1217;

(xxxix) ASTM International Standard C14, Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe, C14-15a (2015), referred to as "ASTM C14," available at https://webstore.ansi.org/standards/astm/astmc1415a?gclid=Cj0KCQiA95aRBhCsARIsAC2xvfxIaQ66MqCuC40LMUwG0WMe0kbvHUvuxW6F3Nc7jy92bGyVdNFHiaoaAo-uEALw_wcB ;

(xl) ASTM International Standard C76, Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe, C76-19a (2019), referred to as "ASTM C76," available at https://webstore.ansi.org/Standards/ASTM/ASTMC7619a;

(xli) ASTM International Standard D2321, Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications, D2321-18 (2018), referred to as "ASTM D2321," available at https://webstore.ansi.org/Standards/ASTM/ASTMD232118;

(xlii) ASTM International Standard D2846, Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems, ASTM D2846/D2846M-19A (2019), referred to as "ASTM D2846," available at https://webstore.ansi.org/Standards/ASTM/ASTMD2846D2846M19a;

(xliii) ASTM International Standard D2996, Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe, D2996-17 (2017), referred to as "ASTM D2996," available at https://webstore.ansi.org/Standards/ASTM/ASTMD299617;

(xliv) ASTM International Standard D2997, Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe, D2997-15 (2015), referred to as "ASTM D2997," available at https://webstore.ansi.org/Standards/ASTM/ASTMD299715;

(xlv) ASTM International Standard D3517, Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe, D3517-19 (2019), referred to as "ASTM D3517," available at https://webstore.ansi.org/Search/Find?in=1&st=ASTM+D3517-19;

(xlvi) ASTM International Standard F480, Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80, F480-14 (2014), referred to as "ASTM F480," available at https://webstore.ansi.org/Standards/ASTM/ASTMF48014;

(xlvii) ASTM International Standard F645, Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems, ASTM F645-18b, (2018), referred to as "ASTM F645," available at https://webstore.ansi.org/Standards/ASTM/ASTMF64518b;

(xlviii) ASTM International Standard F877, Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems, ASTM F877-20, (2020), referred to as "ASTM F877," available at https://webstore.ansi.org/Standards/ASTM/ASTMF87720;

(xlix) ASTM International Standard F2389, Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems, ASTM F2389-21, (2021), referred to as "ASTM F2389," available at https://webstore.ansi.org/Standards/ASTM/ASTMF238921;

(l) ASTM International Standard F2806, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR), ASTM F2806-20, (2020), referred to as "ASTM F2806," available at https://webstore.ansi.org/Standards/ASTM/ASTMF280620;

(li) ASTM International Standard F2855, Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing ASTM F2855-19, (2019), referred to as "ASTM F2855," available at https://webstore.ansi.org/Standards/ASTM/ASTMF285519;

(lii) ASTM International Standard F2969,Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe ASTM F2969-12(2020), (2020), referred to as "ASTM F2969," available at https://webstore.ansi.org/Standards/ASTM/ASTMF2969122020;

(liii) Standard Methods for the Examination of Water and Wastewater, published by American Public Health Association, American Water Works Association, and Water Environment Federation, 23rd Edition (2018), referred to as "Standard Methods for the Examination of Water and Wastewater 2018," available at https://engage.awwa.org/PersonifyEbusiness/Store/Product-Details/productId/65266295;

(liv) Code of Federal Regulations 40 CFR Part 141, in effect as of July 1, 2011, available at: http://www.ecfr.gov;

(lv) Code of Federal Regulations 40 CFR 143.3, in effect as of July 1, 2021; available at: http://www.ecfr.gov;

(lvi) Code of Federal Regulations 40 CFR 173.3(e), in effect as of November 7, 2018, available at: http://www.ecfr.gov;

(lvii) United States Department of Agriculture, Natural Resources Conservation Service, Part 631 National Engineering Handbook, Chapter 32 Well Design and Spring Development, Part 631.3201(b)(iii), in effect as of January 2010, referred to as "USDA NRCS Part 631 National Engineering Handbook," available at https://directives.sc.egov.usda.gov/OpenNonWebContent.aspx?content=26985.wba;

(lviii) Recommended Standards for Water Works, published by Great Lakes Upper Mississippi River Board of State and Provincial Public Health and Environmental Managers, (2018), referred to as "2018 TSS," available at https://www.mngovpublications.com/catalog/Default.asp?CatalogID=21656&Provider_ID=1241868;

(lix) United States Environmental Protection Agency, Long Term 2 Enhanced Surface Water Treatment Rule Toolbox Guidance Manual, 2010, referred to as "Toolbox Guidance Manual," available at https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=P1009JLI.txt;

(lx) United States Environmental Protection Agency, Ultraviolet Disinfection Guidance Manual For The Final Long Term 2 Enhanced Surface Water Treatment Rule, 2006, referred to as "Ultraviolet Disinfection Guidance Manual for the Final LT2ESWTR," available at https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=600006T3.txt; and

(lxi) United States Environmental Protection Agency, Membrane Filtration Guidance Manual, 2005, referred to as "US EPA Membrane Filtration Guidance Manual,"available at https://nepis.epa.govExeZyNET.exeP1008S15.TXTZyActionD=ZyDocument&Client=EPA&Index=2006+Thru+2010&Docs=&Query=&Time=&EndTime=&SearchMethod=1&TocRestrict=n&Toc=&TocEntry=&QField=&QFieldYear=&QFieldMonth=&QFieldDay=&IntQFieldOp=0&ExtQFieldOp=0&XmlQuery=&File=D%3A%5Czyfiles%5CIndex%20Data%5C06thru10%5CTxt%5C00000021%5CP1008S15.txt&User=ANONYMOUS&Password=anonymous&SortMethod=h%7C-&MaximumDocuments=1&FuzzyDegree=0&ImageQuality=r75g8r75g8x150y150g16i425&Display=hpfr&DefSeekPage=x&SearchBack=ZyActionL&Back=ZyActionS&BackDesc=Results%20page&MaximumPages=1&ZyEntry=1&SeekPage=x&ZyPURL.

(b) For these codes, standards, rules, and regulations incorporated by reference:

(i) The Environmental Quality Council has determined that incorporation of the full text in these rules would be cumbersome or inefficient given the length or nature of the rules.

(ii) This Chapter does not incorporate later amendments or editions of incorporated codes, standards, rules, and regulations.

(iii) All incorporated codes, standards, rules, and regulations are available for public inspection at the Department's Cheyenne office. Contact information for the Cheyenne office may be obtained at http://deq.wyoming.gov or from (307) 777-7937.

Disclaimer: These regulations may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.