Current through September 21, 2024
(a) General
standards: All facilities shall comply with the applicable standards in this
chapter, whether or not detailed information must be submitted in a permit
application.
(b) Permit application
forms: All permit applications shall contain a completed permit application
form. All permit application forms shall be signed by the operator, the
landowner and any real property lien holder of public record. All applications
shall be signed by the operator under oath subject to penalty of perjury. All
persons signing the application shall be duly authorized agents.
(i) The following persons are considered duly
authorized agents:
(A) For a municipality,
state, federal or other public agency, by the head of the agency or ranking
elected official.
(B) For
corporations, at least two principal officers.
(C) For a sole proprietorship or partnership,
a proprietor or general partner, respectively.
(ii) Except for Low Hazard/Low Volume (LH/LV)
facilities (fixed and mobile), all permit applications shall be prepared under
the supervision of a professional engineer registered in the State of Wyoming.
Except for LH/LV facilities (fixed and mobile), all permit application forms
shall be stamped, dated and signed by a professional engineer. In addition, all
portions of the permit application that require geological services or work
shall be stamped, signed and dated by a professional geologist licensed by the
State of Wyoming.
(c)
Low Hazard/Low Volume facility permit applications, except applications for
mobile facilities: In addition to a permit application form, LH/LV permit
applications shall include:
(i) An original
USGS map or another map approved by the Administrator, identifying the location
of the facility. If the facility is located within a city or town, a map of the
city or town may be used in lieu of an original USGS map.
(ii) A brief narrative describing the
facility, including a description of waste management activities, the type and
quantity of waste managed, the service area and the source of incoming
waste.
(iii) A demonstration that
the facility meets the location standards in Section
4 of this chapter.
(iv) Except for municipally operated
facilities, a detailed description of the tasks to be completed in order to
properly close the facility, including but not limited to the removal and
proper management of the maximum amount of wastes, both treated and untreated,
that may be stored at the facility, cleaning of all solid waste management
units and equipment, and reclamation of the site.
(v) Information to verify compliance with
Chapter 7, including an estimate of third-party costs associated with facility
closure tasks, and an appropriate financial assurance mechanism.
(d) Mobile and full-size fixed
transfer, treatment, and storage facility permit applications: In addition to a
permit application form, a written application shall demonstrate compliance
with the applicable requirements of Sections
3 - 17 of this chapter. If any standard or
requirement is not applicable to the facility, the permit application shall
explain why the standard or requirement is not applicable.
(e) Renewal applications: Renewal
applications shall be submitted as required in Chapter 1 and shall contain the
following information:
(i) A compilation of
any available previous permit application materials and supplemental
information updated and revised as necessary to describe any amendments and
fulfill the information requirements specified in this chapter, except for
surface ownership and location standards. The applicant may submit copies of
only the updated and revised portion of the previous application, if the
revised and updated pages are appropriately numbered and dated to facilitate
incorporation into the previous permit document.
(ii) Any necessary plan revisions and any
requests for approval of amendments.
