Wyoming Administrative Code
Agency 020 - Environmental Quality, Dept. of
Sub-Agency 0009 - Solid Waste Management
Chapter 6 - TRANSFER, TREATMENT, AND STORAGE FACILITY REGULATIONS
Section 6-17 - Supporting Documentation/Appendices

Universal Citation: WY Code of Rules 6-17

Current through December 21, 2024

(a) Supporting materials: At a minimum, appendices shall include the information in this section.

(b) Map or aerial photograph: For fixed facilities, an original USGS topographic map or aerial photograph of the area shall be submitted showing land ownership, land use and zoning within one-half mile of the facility, unless there is an incinerator at the waste management site, in which case the map or aerial photograph shall show land ownership, land use and zoning within one mile of the facility. The map or photograph shall be of sufficient scale to show all city boundaries, occupied dwellings, schools, hospitals, industrial buildings, water wells, water courses, roads and other applicable details and shall indicate the general topography.

(c) General facility plot plan: For fixed facilities, a general facility plot plan at a scale approved by the Administrator shall be submitted. If all waste management activities occur within a single building, a scaled floor plan can be used in lieu of a general facility plot plan. The general facility plot plan shall illustrate the following features:

(i) Facility boundaries, including any buffer zones and fire lanes proposed between the solid waste permit boundary and the property boundary.

(ii) Points of access.

(iii) Working area/perimeter fence location.

(iv) Location of all solid waste management units and equipment.

(v) Locations of any buildings to house equipment or for other uses.

(vi) The location of any surface water structures.

(vii) The location of environmental monitoring devices.

(viii) Any other facility features requested by the administrator.

(d) Cross sections and drawing details: Cross sections and drawing details may be requested with sufficient specifications to describe:

(i) The movement of wastes through the waste management facility, including the points where process wastes are generated.

(ii) Site access roads.

(iii) Solid waste management units and equipment.

(iv) Secondary containment structures and leak detection systems.

(v) Surface water structures.

(vi) Environmental monitoring systems.

(vii) Any other design and construction details requested by the administrator.

(e) Logs, forms, and reports: Blank copies of any logs, forms, and reports used by the facility to comply with recordkeeping requirements, including a description of where these records will be located.

Disclaimer: These regulations may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.