Wyoming Administrative Code
Agency 020 - Environmental Quality, Dept. of
Sub-Agency 0009 - Solid Waste Management
Chapter 10 - RECYCLING AND PROCESSING REQUIREMENTS FOR COMMERCIAL SOLID WASTE MGMT, FACILITIES
Section 10-6 - Solid Waste Processing Standards
Universal Citation: WY Code of Rules 10-6
Current through September 21, 2024
(a) Allowable facility processing methods: Each facility shall process wastes at the facility using any of the following processes required to separate, prepare, or condition the wastes to meet the recovery standards of Section 7 of this chapter:
(i)
Shredding;
(ii) Grinding;
(iii) Size classification;
(iv) Density classification;
(v) Compaction or densification;
(vi) Liquids removal; or
(vii) Incineration, provided that
incineration may not be used as a means to recover energy from wastes received
at the facility until the solid waste recovery standards of Section 7 of this
chapter for metals, glass, household batteries, and plastics have been
met.
(b) Alternate methods: The department may authorize alternate solid waste processing methods as part of the Chapter 6 permit for any facility, provided that such alternate processing methods are necessary for the facility to meet the recovery standards of Section 7 of this chapter.
Disclaimer: These regulations may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
