Wyoming Administrative Code
Agency 010 - Agriculture, Dept. of
Sub-Agency 0008 - Public Swimming Pools
Chapter 3 - GENERAL AND STRUCTURAL DESIGN; EQUIPMENT STANDARDS
Section 3-13 - Electrical Requirements; Lighting
Universal Citation: WY Code of Rules 3-13
Current through September 21, 2024
(a) All new installations of electrical equipment at pools, spas, and similar installations, and other facilities serving the pool, spa or similar installation shall comply with the applicable provisions set forth in the National Electrical Code, or state or local electrical codes.
(b) Electrical equipment shall be listed by an ANSI-accredited, independent, third-party conformity assessment organization.
(c) All electrical components shall:
(i) Be installed to meet
manufacturer's specifications;
(ii)
Meet applicable federal, state or local codes and regulations;
(iii) Be in compliance with UL 1241, Junction
Boxes for Swimming Pool Fixtures; and
(iv) Be in compliance with UL 1081, Swimming
Pool Pumps, Filters and Chlorinators.
(d) Light fixtures shall be shielded or safety coated to prevent broken glass from falling onto the deck area or into the pool.
Disclaimer: These regulations may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
