Wyoming Administrative Code
Agency 010 - Agriculture, Dept. of
Sub-Agency 0008 - Public Swimming Pools
Chapter 3 - GENERAL AND STRUCTURAL DESIGN; EQUIPMENT STANDARDS
Section 3-1 - Overall Structure
Universal Citation: WY Code of Rules 3-1
Current through September 21, 2024
(a) Public pools, spas and similar installations and all appurtenances shall be:
(i) Constructed of materials which are
considered to be nontoxic to humans and the environment;
(ii) Are impervious and enduring, and will
withstand design stresses; and
(iii) Will provide a water-tight structure
with smooth and easily cleanable surface without cracks or joints, excluding
structural joints.
(b) The structural design and materials used for pools, spas or similar installations shall be in accordance with generally accepted industry engineering practices and methods prevailing at the time of original construction.
(i) It is recommended that
pools and spas be constructed to meet the NSPI Workmanship Standards for
Swimming Pools and Spas.
(c) A public pool shall have no sharp edges or protrusions where walls meet at an acute angle.
(i) The pool shall be shaped to provide for
complete water re-circulation and mixing.
(d) The shell and appurtenances, piping, filter system, pump and motor and other components shall be designed and constructed to facilitate protection from damage due to freezing.
Disclaimer: These regulations may not be the most recent version. Wyoming may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
