Wisconsin Administrative Code
Department of Transportation
Chapter Trans 308 - Requirements for trailer and semi-trailer brake, hitch and coupling, safety chains, cables and leveling bars
Section Trans 308.02 - Brake tubing and hose, adequacy
Universal Citation: WI Admin Code ยง Trans 308.02
Current through February 26, 2024
Brake tubing and brake hose shall be:
(1) Designed and constructed of proper material and so installed and maintained as to insure proper continued functioning;
(2) Sufficiently long and flexible as to accommodate without damage all normal motions of the parts to which they are attached;
(3) Suitably secured against chafing, kinking, or other mechanical injury; and
(4)
(a) Brake hose shall be so constructed as to
insure adequate and reliable functioning and shall conform to the appropriate
specification set forth in the SAE Standards for "Hydraulic Brake Hose
Assemblies for use with Non-Petroleum Base Hydraulic Fluids," SAE J1401a;
"Automotive Air Brake Hose and Hose Assemblies," J1402c; or "Vacuum Brake
Hose," J1403a. (See 1980 SAE Handbook.)
(b) The above referred to SAE Standards are
on file in the offices of the department of transportation, the secretary of
state and the legislative reference bureau, and may be obtained from the
Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale,
Pennsylvania 15096.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
