Wisconsin Administrative Code
Department of Transportation
Chapter Trans 276 - Size and weight of vehicles and vehicle combinations
Section Trans 276.03 - Safety devices-width exclusion

Current through February 26, 2024

(1) The devices in this subsection are designated as safety devices as required under 23 CFR 658.5(g) and 23 CFR 658.15 and are not included in the calculation of width:

(a) Rear-view mirrors;

(b) Turn-signal lamps;

(c) Hand-holds for cab entry and egress;

(d) Splash and spray suppressant devices;

(e) Load induced tire bulge.

(2) The devices in this subsection are determined to be safety devices and are not to be included in the calculation of width provided such devices do not extend beyond 3 inches on each side of a vehicle.

(a) Door hardware, including door handles and locking devices.

(b) Load tie down devices.

(c) Toe holds or retractable steps.

The 3-inch limit is imposed by 23 CFR 658.15. The secretary is authorized to designate additional devices in s. 348.05(2m), Stats.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.