Wisconsin Administrative Code
Department of Transportation
Chapter Trans 214 - Town road bridge standards
Section Trans 214.04 - Minimum design standards
Universal Citation: WI Admin Code ยง Trans 214.04
Current through February 26, 2024
The following minimum standards for bridge design load and bridge width are established for improvements on town road bridges:
TRAFFIC VOLUME |
BRIDGE DESIGN LOAD |
BRIDGE WIDTH |
(1) Under 250 ADT |
H-15 |
24 feet |
(2) 251 to 400 ADT |
H-20 |
26 feet |
(3) 401 to 1,000 ADT |
H-20 |
28 feet |
(4) 1,001 to 2,400 ADT |
H-20 |
30 feet |
(5) Over 2,400 ADT |
State Trunk Highway Standards |
Information on state trunk highway design standards may be obtained from the DOT Division of Highways and Transportation Facilities, P. O. Box 7916, Madison, Wisconsin 53707.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.