Wisconsin Administrative Code
Public Service Commission
Chapter PSC 134 - Standards For Gas Service
Section PSC 134.10 - Service on customer's premises

Universal Citation: WI Admin Code ยง PSC 134.10

Current through August 26, 2024

(1) All changes in the heating value standard, all changes in pressure and specific gravity greater than the allowable variation, and changes in the composition of the gas which would materially affect the operation of the customer's appliances must be accompanied by a general inspection and adjustment of all appliances that would be affected by the changes. The utility shall make such adjustments and such changes to all customers' appliances that are connected to an interior piping system at the time of the change as may be necessary in order that the appliance may operate as efficiently and give as good service as was possible before the change. This should be done promptly and without cost or unnecessary inconvenience to the customer.

(2) If in connection with a service change specified in sub. (1), a piece of properly operating utilization equipment cannot be adjusted so that it will operate satisfactorily and if it must be replaced in its entirety the utility shall share equitably in the cost of changing the equipment. The change in customer's equipment should be made with the greatest possible economy to the customer, and final settlement made at the time of the change. A satisfactory settlement would be payment by the utility to the customer of the remaining value of the customer's equipment and the cost of removing the old and installing in the same position substantially equal equipment which replaces it.

(3)

(a) Each utility shall adopt and file with this commission a policy for inspection of customer's appliances. The filed rule need not include the inspection and adjustment of special industrial equipment, which should be checked by persons more familiar with the equipment. The filed rule shall provide that customers having such equipment are to be notified.

(b) Each gas utility shall establish an educational and inspection program designed to inform customers and assist the general public in the proper and efficient operation and maintenance of gas burning equipment. Such program shall advise customers to have heating equipment checked annually and offer energy saving suggestions to customers.

(c) Whenever a gas utility is required to enter a customer's premises to re-establish service to relight appliances due to a non-emergency interruption of service, an inspection of the burner ignition and flame appearance shall be made on each appliance which is relit to check for safety and efficient operation. The utility will be prepared to advise the customer relative to the safety and efficiency of connected appliances.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.