Wisconsin Administrative Code
Department of Natural Resources
NR 600-699 - Environmental Protection - Hazardous Waste Management
Chapter NR 679 - Used Oil Management Standards
Subchapter F - Standards for Used Oil Processors and Re-Refiners
Section NR 679.57 - Operating record and reporting
Universal Citation: WI Admin Code ยง NR 679.57
Current through August 26, 2024
(1) OPERATING RECORD.
(a) The owner or operator shall keep
a written operating record at the facility.
(b) All of the following information shall be
recorded, as it becomes available, and maintained in the operating record until
closure of the facility:
1. Records and
results of used oil analyses performed as described in the analysis plan
required under s.
NR 679.55.
2.
Summary reports and details of all incidents that require implementation of the
contingency plan as specified in s.
NR 679.52(2).
(2) REPORTING. A used oil processor or re-refiner shall report to the department on a biennial basis (by March 1 of each even numbered year), all of the following information concerning used oil activities during the previous calendar year:
(a) The EPA identification number, name and
address of the processor or re-refiner.
(b) The calendar year covered by the
report.
(c) The quantities of used
oil accepted for processing or re-refining and the manner in which the used oil
is processed or re-refined, including the specific processes
employed.
Department form 4400-193 may be used to meet this reporting requirement and may be obtained from the department by E-mail: DNRWasteMaterials@wisconsin.gov or phone: (608) 266-2111.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
