Current through August 26, 2024
(1) Each owner or
operator of a batch vapor or in-line solvent cleaning machine complying with
the provisions of ss.
NR 469.04 to shall maintain 469.077 all of the records,
in written or electronic form, specified in pars. (a) to (g), for the lifetime
of the machine.
(a) Owner's manuals, or if
not available, written maintenance and operating procedures, for the solvent
cleaning machine and control equipment.
(b) The date of installation for the solvent
cleaning machine and all of its control devices. If the exact date for
installation is not known, a letter certifying that the cleaning machine and
its control devices were installed on or before November 29, 1993, or after
November 29, 1993, may be substituted.
(c) If dwell is used to comply with these
standards, records of the tests required in s.
NR 469.09(4) to determine an appropriate
dwell time for each part or parts basket.
(d) For a solvent cleaning machine complying
with the idling emission limit standards of s.
NR 469.04(2) (a) 2. or (b) 2. or (3) (a) 2. or (b)
2., records of the initial performance test,
including the idling emission rate and values of the monitoring parameters
measured during the test.
(e)
Records of the halogenated HAP solvent content for each solvent used in a
solvent cleaning machine subject to the provisions of this chapter.
(f) If a squeegee system is used to comply
with these standards, records of the test required by s.
NR 469.10(6) to determine the maximum
product throughput for the squeegees and records of both the weekly monitoring
required by s.
NR 469.10(1)
(c) for visual inspection and the length of
continuous web product cleaned during the previous week.
(g) If an air knife system or a combination
squeegee and air knife system is used to comply with these standards, records
of the determination of the proper operating parameter and parameter value for
the air knife system.
(2) Each owner or operator of a batch vapor
or in-line solvent cleaning machine complying with ss.
NR 469.04 to shall maintain 469.07 the records specified
in pars. (a) to (d), either in electronic or written form, for a period of 5
years.
(a) The results of control device
monitoring required under s.
NR 469.10.
(b) Information on the actions taken to
comply with ss.
NR 469.06 and 469.07. This information shall include
records of written or verbal orders for replacement parts, a description of the
repairs made and additional monitoring conducted to demonstrate that monitored
parameters have returned to accepted levels.
(c) Estimates of annual solvent consumption
for each solvent cleaning machine.
(d) If a carbon adsorber is used to comply
with these standards, records of the date and results of the weekly measurement
of the halogenated HAP solvent concentration in the carbon adsorber exhaust
required in s.
NR 469.10(5).
(3) Except as provided in sub. (5) for
continuous web cleaning machines, each owner or operator of a batch vapor or
in-line solvent cleaning machine complying with the provisions of s.
NR 469.08
shall maintain the records specified in pars. (a) to (c), either in electronic
or written form, for a period of 5 years.
(a)
The dates and amounts of solvent that are added to the solvent cleaning
machine.
(b) The solvent
composition of wastes removed from cleaning machines as determined using the
procedure described in s.
NR 469.09(3) (b).
(c) Calculation sheets showing how monthly
emissions and the rolling 3-month average emissions from the solvent cleaning
machine were determined, and the results of all calculations.
(4) Each owner or operator of a
solvent cleaning machine without a solvent/air interface complying with the
provisions of s.
NR 469.08
shall maintain records on the method used to determine the cleaning capacity of
the cleaning machine.
(5) Each
owner or operator of a continuous web cleaning machine complying with the
provisions of s.
NR 469.08(4) shall maintain the
following records in either electronic or written form for a period of 5 years.
(a) The dates and amounts of solvent that are
added to the solvent cleaning machine.
(b) The dates and amounts of solvent that are
recovered from the desorption of the carbon adsorber system.
(c) The solvent composition of wastes removed
from each cleaning machine as determined using the procedures in s.
NR 469.09(3) (b).
(d) Calculation sheets showing the
calculation and results of determining the overall cleaning system control
efficiency as required by s.
NR 469.09.
