Wisconsin Administrative Code
Department of Natural Resources
NR 400-499 - Environmental Protection - Air Pollution Control
Chapter NR 466 - National emission standards for hazardous air pollutants for printing and flexible substrate surface coating processes
Subchapter I - Printing and Publishing
Section NR 466.11 - Recordkeeping requirements

Universal Citation: WI Admin Code § NR 466.11

Current through August 26, 2024

(1) Recordkeeping requirements of ch. NR 460 apply to owners and operators of affected sources subject to this chapter as indicated in ch. NR 460 Appendix KK.

(2) Each owner or operator of an affected source subject to this chapter shall maintain on a monthly basis, in accordance with the requirements of s. NR 460.09(2) (a), all of the following records:

(a) Records specified in s. NR 460.09(2) (b), of all measurements needed to demonstrate compliance with this chapter, such as continuous emission monitor data, control device and capture system operating parameter data, material usage, HAP usage, volatile matter usage and solids usage that support data that the source is required to report.

(b) Records specified in s. NR 460.09(2) (c) for each applicability determination performed by the owner or operator in accordance with the requirements of s. NR 466.01(1) (a) to (f).

(c) Records specified in s. NR 460.09(3) for each continuous monitoring system operated by the owner or operator in accordance with the requirements of s. NR 466.10 (intro.).

(3) Each owner or operator of an affected source subject to this chapter shall maintain records of all liquid-liquid material balances performed in accordance with the requirements of ss. NR 466.06 and 466.07. The records shall be maintained in accordance with the requirements of s. NR 460.09(2).

(4) The owner or operator of each facility which commits to the criteria of s. NR 466.01(1) (a) 2. shall maintain records of all required measurements and calculations needed to demonstrate compliance with these criteria, including the mass of all HAP containing materials used and the mass fraction of HAP present in each HAP containing material used, on a monthly basis.

(5)

(a) The owner or operator of each facility which meets the criteria of s. NR 466.015(3) (a) shall maintain records of the total volume of each material applied on product and packaging rotogravure or wide-web flexographic printing presses during each month.

(b) The owner or operator of each facility which meets the criteria of s. NR 466.015(3) (b) shall maintain records of the total volume and organic HAP content of each material applied on product and packaging rotogravure or wide-web flexographic printing presses during each month.

(c) The records required under pars. (a) and (b) shall be maintained for 5 years and, upon request, submitted to the department.

(6) The owner or operator choosing to exclude from an affected source a product and packaging rotogravure or wide-web flexographic press which meets the limits and criteria of s. NR 466.015(1) (b) 2. shall maintain the following records for 5 years and submit them to the department upon request:

(a) The total mass of each material applied each month on the press, including all inboard and outboard stations.

(b) The total mass of each material applied each month on the press by product and packaging rotogravure or wide-web flexographic printing operations.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.